AP2501AMP-13 Equivalent & Substitute Parts

Part Overview

The AP2501AMP-13 is a Power Switch/Driver IC manufactured by Diodes Incorporated, designed for 1:1 P-Channel high-side switching applications in USB power management circuits. This component operates at 2A maximum output current with 70mOhm typical on-resistance and supports load voltages from 2.7V to 5.5V.

The AP2501AMP-13 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support long-term production requirements for applications currently using this component.

Substiute Parts

AP2501AMP-13

Diodes IncorporatedIn Stock: 3856AP2501AMP-13 Datasheet

Current PartRFQ

AP2511MP-13

Diodes IncorporatedIn Stock: 54746AP2511MP-13 Datasheet

MFR RecommendedRFQ

AP2301AMP-13

Diodes IncorporatedIn Stock: 1128AP2301AMP-13 Datasheet

Parametric EquivalentRFQ

AP2311AMP-13

Diodes IncorporatedIn Stock: 7787AP2311AMP-13 Datasheet

Parametric EquivalentRFQ

AP2411AMP-13

Diodes IncorporatedIn Stock: 3665AP2411AMP-13 Datasheet

Parametric EquivalentRFQ

AP2501AMP-13

Diodes IncorporatedIn Stock: 3856AP2501AMP-13 Datasheet

Parametric EquivalentRFQ

AP2511AMP-13

Diodes IncorporatedIn Stock: 3793AP2511AMP-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AP2501AMP-13 are grouped based on strict electrical and mechanical compatibility criteria:

Primary Substitution Criteria:

• Identical package type: 8-MSOP-EP
• Matching output configuration: High-side P-Channel 1:1 switch
• Compatible load voltage range: 2.7V ~ 5.5V
• Identical interface type: On/Off control
• Matching fault protection features: Current Limiting, Over Temperature, Reverse Current, UVLO
• Identical mounting type: Surface Mount
• Compliance alignment: ROHS3, MSL 1, REACH Unaffected

Substitution Categories:

Manufacturer Recommended Upgrade: AP2511MP-13 provides increased output current capability (2.5A vs 2A) while maintaining all other electrical parameters and package compatibility. Active product status ensures long-term availability.

Parametric Equivalents (Full Compatibility): AP2311AMP-13, AP2411AMP-13, and AP2511AMP-13 maintain identical electrical specifications (2A output current, 70mOhm Rds On) and package format. All three are Active status products with Tape & Reel packaging.

Parametric Equivalent (Identical Specifications): AP2301AMP-13 matches all electrical parameters but carries Obsolete status, limiting its suitability for new designs despite technical compatibility.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Long-Term Production: AP2511MP-13 is the recommended primary substitute. This part carries Active product status, ensuring sustained manufacturer support and supply chain availability. The increased output current rating (2.5A) provides design margin for applications operating near the 2A limit of the original AP2501AMP-13. Identical package footprint and electrical interface enable direct PCB substitution without layout modifications.

For Direct Replacement with Equivalent Specifications: AP2311AMP-13, AP2411AMP-13, and AP2511AMP-13 provide full electrical and mechanical compatibility with the AP2501AMP-13. All three maintain Active product status with Tape & Reel packaging, supporting high-volume production requirements. These parts are suitable for applications where the 2A output current specification is sufficient and design margin is not a primary concern.

Avoid for New Designs: AP2301AMP-13 carries Obsolete product status despite matching electrical specifications. This designation indicates discontinued manufacturer support and limited long-term availability, making it unsuitable for designs requiring sustained production or future component replenishment.

Frequently Asked Questions (FAQ)

Q: Can AP2511MP-13 be used as a direct replacement for AP2501AMP-13? A: Yes. AP2511MP-13 is electrically and mechanically compatible with identical package type (8-MSOP-EP), matching load voltage range (2.7V ~ 5.5V), and equivalent on-resistance (70mOhm). The increased output current rating (2.5A vs 2A) does not prevent substitution in applications designed for 2A operation. PCB layout requires no modification.

Q: What is the difference between AP2511MP-13 and AP2511AMP-13? A: Both parts share identical electrical specifications and package type. The primary difference is packaging format: AP2511MP-13 is supplied in Tape & Reel (TR), while AP2511AMP-13 packaging is not specified. For high-volume production, Tape & Reel format typically offers cost and handling advantages.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts (AP2511MP-13, AP2301AMP-13, AP2311AMP-13, AP2411AMP-13, AP2511AMP-13) carry ROHS3 Compliant status, matching the original AP2501AMP-13 compliance requirement.

Q: Why is AP2301AMP-13 listed if it is Obsolete? A: AP2301AMP-13 is included for reference as a parametric equivalent with identical electrical specifications. However, its Obsolete status limits practical application for new designs or sustained production. Active status alternatives (AP2311AMP-13, AP2411AMP-13, AP2511AMP-13, AP2511MP-13) are preferred for long-term availability.

Q: Do all substitute parts support the same fault protection features? A: Yes. All substitute parts include identical fault protection: Current Limiting (Fixed), Over Temperature, Reverse Current, and UVLO (Under Voltage Lock Out), matching the original AP2501AMP-13 protection architecture.

Q: Is the 8-MSOP-EP package footprint identical across all parts? A: Yes. All parts use the 8-MSOP-EP package with 0.118" width and 3.00mm body dimension. PCB footprints are mechanically and electrically interchangeable without layout modification.