AP2411FGE-7 Equivalent & Substitute Parts

Part Overview

The AP2411FGE-7 is an active high-side P-channel power switch designed for USB switching applications. This integrated circuit provides 1:1 switching configuration with 2A maximum output current and integrated fault protection including current limiting, over-temperature, reverse current, and under-voltage lockout (UVLO). The device is actively manufactured by Diodes Incorporated and maintains ROHS3 compliance with unlimited moisture sensitivity rating.

Substitute parts are identified when electrical specifications, mechanical packaging, and functional characteristics remain equivalent across the allowed parameter set, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

AP2411FGE-7

Diodes IncorporatedIn Stock: 3211AP2411FGE-7 Datasheet

Current PartRFQ

AP2311FGEG-7

Diodes IncorporatedIn Stock: 23814AP2311FGEG-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AP2311FGEG-7 qualifies as a parametric equivalent based on identical electrical and mechanical specifications across all critical substitution criteria:

• Identical switch type, output configuration, and P-channel topology
• Matching 1:1 input-to-output ratio and 2A maximum output current
• Equivalent load voltage range (2.7V ~ 5.5V) and on-resistance (70mOhm typical)
• Identical package designation (8-UDFN Exposed Pad, U-DFN3030-8 Type E)
• Matching operating temperature range (-40°C ~ 85°C)
• Identical fault protection feature set
• Both devices manufactured by Diodes Incorporated with active product status

The only distinction between these parts is packaging format: AP2411FGE-7 is supplied in Cut Tape (CT) & Digi-Reel format, while AP2311FGEG-7 is supplied in Tape & Reel (TR) format. This packaging difference does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both AP2411FGE-7 and AP2311FGEG-7 are active products manufactured by Diodes Incorporated with identical electrical specifications and mechanical compatibility. Selection between these parts is determined by packaging and supply chain requirements:

• AP2411FGE-7 is appropriate for applications requiring Cut Tape or Digi-Reel packaging formats
• AP2311FGEG-7 is appropriate for applications requiring Tape & Reel packaging format

Both devices maintain ROHS3 compliance, REACH unaffected status, and unlimited moisture sensitivity rating (MSL 1). No functional or performance differences exist between these parts when applied to equivalent circuit designs.

Frequently Asked Questions (FAQ)

Q: Can AP2311FGEG-7 directly replace AP2411FGE-7 in production?

A: Yes. All electrical parameters, mechanical dimensions, pin configurations, and fault protection features are identical. The only difference is packaging format (Tape & Reel versus Cut Tape/Digi-Reel). Direct substitution is valid from an engineering standpoint.

Q: Are there any performance differences between these parts?

A: No. Both devices specify identical maximum output current (2A), on-resistance (70mOhm typical), load voltage range (2.7V ~ 5.5V), operating temperature range (-40°C ~ 85°C), and fault protection mechanisms.

Q: What determines substitution eligibility for AP2411FGE-7?

A: Substitution eligibility is based on matching the following parameters: USB switch type, high-side P-channel output configuration, 1:1 input-to-output ratio, 2A maximum output current, 70mOhm typical on-resistance, 2.7V ~ 5.5V load voltage range, 8-UDFN package with exposed pad, and identical fault protection feature set.

Q: Does packaging format affect circuit performance?

A: No. Cut Tape, Digi-Reel, and Tape & Reel formats are supply and handling variations only. Once soldered to a PCB, the device performance is identical regardless of original packaging format.

Q: Are both parts currently available?

A: Yes. AP2411FGE-7 has 3200 pieces in stock. AP2311FGEG-7 has 23793 pieces in stock. Both maintain active product status with Diodes Incorporated.