AP2411ASN-7 Equivalent & Substitute Parts

Part Overview

The AP2411ASN-7 is a Power Switch/Driver IC from Diodes Incorporated, classified as a Power Management (PMIC) component. This device functions as a 1:1 P-Channel USB Switch with 2A output capability, designed for high-side load switching applications. The part is currently listed as Obsolete, making identification of equivalent and substitute components essential for ongoing design support and production continuity. Substitute parts maintain identical electrical and mechanical specifications while offering active product status and improved availability.

Substiute Parts

AP2411ASN-7

Diodes IncorporatedIn Stock: 983AP2411ASN-7 Datasheet

Current PartRFQ

AP2401ASN-7

Diodes IncorporatedIn Stock: 909AP2401ASN-7 Datasheet

DirectRFQ

AP2311ASN-7

Diodes IncorporatedIn Stock: 625AP2311ASN-7 Datasheet

Parametric EquivalentRFQ

AP2511ASN-7

Diodes IncorporatedIn Stock: 873AP2511ASN-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP2411ASN-7 is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Voltage range (2.7V ~ 5.5V), maximum output current (2A), and on-resistance (70mOhm Typ)
• Functional Configuration: P-Channel output type, high-side switching, 1:1 input-output ratio, USB Switch classification
• Protection Features: Current limiting, over-temperature protection, reverse current protection, and UVLO
• Package Compatibility: 6-UDFN Exposed Pad surface-mount package
• Environmental Compliance: ROHS3 compliance and MSL Level 1

The substitute parts identified below maintain all specified electrical and mechanical parameters. Differences in input type (Inverting vs. Non-Inverting) and product status are noted but do not affect functional substitution within equivalent load-switching applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Parametric Equivalents)

AP2311ASN-7 and AP2511ASN-7 are parametric equivalents to the AP2411ASN-7, maintaining identical electrical specifications and package configuration. Both parts carry Active product status, ensuring long-term availability and manufacturing support. These parts are recommended for new designs and production continuity where the AP2411ASN-7 is no longer available.

Secondary Substitute (Input Logic Consideration)

AP2401ASN-7 is functionally equivalent with one critical distinction: it features Inverting input logic compared to the Non-Inverting input of the AP2411ASN-7. This part is suitable for substitution only in applications where the inverting input characteristic is compatible with the control signal architecture. AP2401ASN-7 also maintains Active product status and identical electrical performance specifications.

Compliance and Certification

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and identical fault protection mechanisms (current limiting, over-temperature, reverse current, and UVLO). No additional qualification or testing is required based on regulatory compliance status.

Frequently Asked Questions (FAQ)

Q: Can AP2311ASN-7 or AP2511ASN-7 be used as direct replacements for AP2411ASN-7?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output current rating (2A), on-resistance (70mOhm), voltage range (2.7V ~ 5.5V), and package configuration (6-UDFN Exposed Pad). The primary advantage is Active product status, ensuring continued availability.

Q: What is the difference between AP2411ASN-7 and AP2401ASN-7?

A: The AP2401ASN-7 features Inverting input logic, whereas the AP2411ASN-7 uses Non-Inverting input logic. All other electrical and mechanical parameters are identical. Substitution is valid only if the control signal polarity is compatible with the inverting input characteristic.

Q: Are there packaging differences between these parts?

A: All parts use the 6-UDFN Exposed Pad surface-mount package. The AP2311ASN-7 and AP2511ASN-7 are supplied in Tape & Reel (TR) packaging, while AP2411ASN-7 and AP2401ASN-7 packaging is not specified. This does not affect electrical compatibility or PCB assembly compatibility.

Q: Do all substitute parts meet the same environmental and compliance standards?

A: Yes. All parts are ROHS3 compliant, carry MSL Level 1 rating (Unlimited moisture sensitivity), and include identical fault protection features: current limiting, over-temperature protection, reverse current protection, and UVLO.

Q: Which substitute should be selected for new designs?

A: AP2311ASN-7 or AP2511ASN-7 are recommended for new designs due to Active product status and Non-Inverting input logic matching the original AP2411ASN-7. Both maintain identical electrical performance and long-term availability.