AP2411AMP-13 Equivalent & Substitute Parts

Part Overview

The AP2411AMP-13 is a Power Switch/Driver IC manufactured by Diodes Incorporated, designed for USB Switch applications with 1:1 P-Channel output configuration. This active product operates as a high-side power switch with 2A maximum output current and integrated fault protection including current limiting, over-temperature, reverse current, and UVLO monitoring. The component is housed in an 8-MSOP-EP package with exposed pad for enhanced thermal performance.

Substitute parts become necessary when the primary part experiences supply constraints, end-of-life transitions, or when design flexibility requires alternative qualified options within the same functional class.

Substiute Parts

AP2411AMP-13

Diodes IncorporatedIn Stock: 3665AP2411AMP-13 Datasheet

Current PartRFQ

AP2301AMP-13

Diodes IncorporatedIn Stock: 1128AP2301AMP-13 Datasheet

Parametric EquivalentRFQ

AP2311AMP-13

Diodes IncorporatedIn Stock: 7787AP2311AMP-13 Datasheet

Parametric EquivalentRFQ

AP2501AMP-13

Diodes IncorporatedIn Stock: 3856AP2501AMP-13 Datasheet

Parametric EquivalentRFQ

AP2511AMP-13

Diodes IncorporatedIn Stock: 3793AP2511AMP-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP2411AMP-13 is determined by strict equivalence across the following critical parameters:

• Switch Type: USB Switch
• Output Configuration: High Side, P-Channel, 1:1 ratio
• Current - Output (Max): 2A
• Voltage - Load: 2.7V ~ 5.5V
• Rds On (Typ): 70mOhm
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
• Mounting Type: Surface Mount
• Fault Protection: Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
• Features: Load Discharge, Slew Rate Controlled, Status Flag
• Interface: On/Off
• Input Type: Non-Inverting
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed maintain identical electrical and mechanical specifications across these parameters, ensuring direct functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The AP2411AMP-13 is the primary active product with full manufacturing support and current availability. For applications requiring immediate substitution, AP2311AMP-13 and AP2511AMP-13 are active alternatives with identical electrical and mechanical specifications and equivalent ROHS3 compliance status.

AP2301AMP-13 and AP2501AMP-13 are obsolete products and should be selected only when existing inventory must be utilized or when design legacy requirements mandate their use. These obsolete variants maintain full parametric equivalence but lack ongoing manufacturing support.

All substitute parts carry ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard PCB assembly and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can AP2311AMP-13 or AP2511AMP-13 be used as direct replacements for AP2411AMP-13?

A: Yes. AP2311AMP-13 and AP2511AMP-13 are parametrically equivalent to AP2411AMP-13 across all critical electrical and mechanical specifications. Both are active products with current manufacturing support. Direct PCB substitution is supported without circuit modification.

Q: What is the difference between active and obsolete product status?

A: Active products (AP2411AMP-13, AP2311AMP-13, AP2511AMP-13) have ongoing manufacturing and are available through standard distribution channels. Obsolete products (AP2301AMP-13, AP2501AMP-13) are no longer manufactured and should be sourced only from existing inventory. Obsolete parts maintain full functional equivalence but lack future availability guarantees.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All listed substitute parts use the identical 8-MSOP-EP package with 0.118" width and 3.00mm dimensions. PCB footprints, land patterns, and thermal pad designs are directly compatible without layout modification.

Q: Do substitute parts require different handling or storage procedures?

A: No. All substitute parts carry MSL 1 (Unlimited) moisture sensitivity rating, identical to the primary part. Standard ESD handling and dry storage protocols apply uniformly across all variants.

Q: Which substitute part should be selected for new designs?

A: AP2311AMP-13 or AP2511AMP-13 are recommended for new designs due to active product status and guaranteed manufacturing availability. Selection between these two active alternatives depends on supplier inventory and lead time considerations, as both are parametrically identical.