AP2301AS-13 Equivalent & Substitute Parts

Part Overview

The AP2301AS-13 is an active Power Management IC (PMIC) classified as a Power Switch/Driver with P-Channel output configuration. This component functions as a USB Switch with 1:1 input-to-output ratio, designed for high-side switching applications in the 2.7V to 5.5V load voltage range. The part is currently in active production status with 5400 units available in inventory. Equivalent and substitute parts are identified when identical electrical and mechanical parameters are maintained across the component family, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

AP2301AS-13

Diodes IncorporatedIn Stock: 5418AP2301AS-13 Datasheet

Current PartRFQ

AP2311AS-13

Diodes IncorporatedIn Stock: 2743AP2311AS-13 Datasheet

Parametric EquivalentRFQ

AP2411AS-13

Diodes IncorporatedIn Stock: 7797AP2411AS-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP2301AS-13 is determined by strict equivalence across the following critical parameters: Switch Type (USB Switch), Output Type (P-Channel), Output Configuration (High Side), Number of Outputs (1), Input-to-Output Ratio (1:1), Load Voltage Range (2.7V ~ 5.5V), Maximum Output Current (2A), On-Resistance (70mOhm typical), Operating Temperature Range (-40°C ~ 85°C), Package Type (8-SOIC), and Mounting Type (Surface Mount). All identified substitute parts maintain identical values across these parameters, confirming direct functional and mechanical compatibility. The AP2311AS-13 and AP2411AS-13 are parametric equivalents within the Diodes Incorporated power switch family, differentiated only by base product number designation while maintaining complete electrical and physical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AP2301AS-13, AP2311AS-13, and AP2411AS-13—maintain active production status with full ROHS3 compliance and REACH unaffected certification. Selection between these equivalents is based on inventory availability and supply chain considerations rather than electrical or mechanical differentiation. The AP2411AS-13 offers the highest inventory level at 7700 units, followed by AP2301AS-13 at 5400 units, and AP2311AS-13 at 2700 units. For applications requiring immediate component availability, the AP2411AS-13 presents the optimal choice. All parts are suitable for direct substitution in existing designs without circuit modification or re-qualification.

Frequently Asked Questions (FAQ)

Q: Can AP2311AS-13 and AP2411AS-13 be used as direct replacements for AP2301AS-13?

A: Yes. All three parts are parametric equivalents with identical electrical specifications, output characteristics, voltage ratings, current ratings, on-resistance, operating temperature range, and 8-SOIC package configuration. Direct substitution is supported without design changes.

Q: Are there any differences in fault protection features between these parts?

A: No. All three parts include identical fault protection: Current Limiting (Fixed), Over Temperature, Reverse Current, and UVLO (Under Voltage Lock Out).

Q: Do all substitute parts have the same interface and control characteristics?

A: Yes. All parts feature On/Off interface, Non-Inverting input type, Load Discharge, Slew Rate Controlled output, and Status Flag functionality.

Q: What is the significance of the different base product numbers (AP2301, AP2311, AP2411)?

A: Base product number designation differentiates parts within the Diodes Incorporated power switch family. However, the AS-13 suffix variants maintain complete electrical and mechanical equivalence, making them interchangeable for the specified application parameters.

Q: Are moisture sensitivity levels identical across all three parts?

A: Yes. All parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these parts be used interchangeably in high-volume production?

A: Yes. All parts are surface mount components in identical 8-SOIC packages with matching pin configurations, supporting automated assembly processes without tooling changes.