AP22814BM8-13 Equivalent & Substitute Parts

Part Overview

The AP22814BM8-13 is an active Power Management Integrated Circuit (PMIC) classified as a Power Switch/Driver. This component functions as a P-Channel high-side switch with 1:1 input-to-output ratio, designed for USB switching applications requiring controlled load management. The part is currently in active production status with 7,900 units available in new original inventory. Alternative equivalent parts may be required due to supply constraints, procurement lead times, or inventory availability across different distribution channels.

Substiute Parts

AP22814BM8-13

Diodes IncorporatedIn Stock: 7983AP22814BM8-13 Datasheet

Current PartRFQ

AP22814AM8-13

Diodes IncorporatedIn Stock: 2676AP22814AM8-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AP22814BM8-13 has one parametric equivalent substitute: AP22814AM8-13. This substitution is valid based on strict electrical and mechanical parameter matching across all critical specifications. The substitute part maintains identical performance characteristics in the following key parameters:

• Switch Type: USB Switch
• Output Type: P-Channel (High Side)
• Number of Outputs: 1:1 ratio
• Maximum Output Current: 3A
• Load Voltage Range: 2.7V ~ 5.5V
• On-Resistance (Rds On): 50mOhm typical
• Operating Temperature Range: -40°C ~ 85°C
• Package Configuration: 8-MSOP surface mount
• Fault Protection: Current Limiting (Fixed), Over Temperature, UVLO
• Interface: On/Off with Load Discharge and Status Flag features

Both parts are manufactured by Diodes Incorporated, share the same base product number (AP22814), and are ROHS3 compliant with identical moisture sensitivity levels (MSL 1 - Unlimited).

Parameter Comparison

Engineering Selection Recommendations

Both the AP22814BM8-13 and AP22814AM8-13 are active production components manufactured by Diodes Incorporated with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on inventory availability and procurement lead times. The AP22814BM8-13 offers higher stock availability (7,900 units), while the AP22814AM8-13 provides an alternative source with 2,650 units in stock. Both parts carry identical electrical performance specifications, mechanical packaging, and regulatory certifications, making them fully interchangeable for USB switch applications requiring P-Channel high-side switching at 3A maximum output current within the 2.7V to 5.5V load voltage range.

Frequently Asked Questions (FAQ)

Q: Are AP22814BM8-13 and AP22814AM8-13 pin-compatible?

A: Yes. Both parts use the 8-MSOP surface mount package with identical pinout, electrical characteristics, and mechanical dimensions (0.118" width, 3.00mm). Direct PCB substitution is possible without layout modifications.

Q: What is the difference between these two part numbers?

A: The parts differ only in their internal manufacturing code suffix (BM8-13 versus AM8-13). All electrical parameters, performance specifications, and package configurations are identical. The difference reflects manufacturing batch or date code variations from Diodes Incorporated.

Q: Can I use AP22814AM8-13 as a drop-in replacement for AP22814BM8-13?

A: Yes. The parts are parametric equivalents with matching electrical specifications, output current ratings (3A), on-resistance (50mOhm), voltage ratings (2.7V ~ 5.5V), temperature range (-40°C ~ 85°C), and fault protection features. No circuit modifications are required.

Q: Are both parts suitable for USB switching applications?

A: Yes. Both parts are classified as USB Switch components with P-Channel high-side output configuration, designed for controlled load switching in USB power delivery and management circuits.

Q: What compliance certifications apply to both parts?

A: Both AP22814BM8-13 and AP22814AM8-13 are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings. Both are active production components.