AP22814AM8-13 Equivalent & Substitute Parts

Part Overview

The AP22814AM8-13 is an active Power Management Integrated Circuit (PMIC) manufactured by Diodes Incorporated, functioning as a USB Power Switch/Driver with P-Channel output configuration. This component operates as a high-side switch delivering up to 3A output current with integrated load discharge and status flag capabilities. The part is in active production status with 2650 units currently in stock. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications are maintained across the same product family.

Substiute Parts

AP22814AM8-13

Diodes IncorporatedIn Stock: 2676AP22814AM8-13 Datasheet

Current PartRFQ

AP22814BM8-13

Diodes IncorporatedIn Stock: 7983AP22814BM8-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP22814AM8-13 is determined by strict equivalence across the following critical parameters:

• Switch Type: USB Switch
• Output Type: P-Channel
• Number of Outputs: 1
• Ratio - Input:Output: 1:1
• Output Configuration: High Side
• Current - Output (Max): 3A
• Voltage - Load: 2.7V ~ 5.5V
• Rds On (Typ): 50mOhm
• Interface: On/Off
• Input Type: Non-Inverting
• Features: Load Discharge, Status Flag
• Fault Protection: Current Limiting (Fixed), Over Temperature, UVLO
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Supplier Device Package: 8-MSOP

The AP22814BM8-13 meets all substitution criteria as a parametric equivalent within the AP22814 product family.

Parameter Comparison

Engineering Selection Recommendations

Both AP22814AM8-13 and AP22814BM8-13 are active production components with identical electrical specifications, mechanical packaging, and compliance certifications. Selection between these parts is based on availability and supply chain requirements. The AP22814BM8-13 offers higher inventory availability at 7900 units compared to 2650 units for the AP22814AM8-13. Both parts maintain ROHS3 compliance, MSL Level 1 rating, and equivalent fault protection mechanisms. PCB layout and schematic integration remain identical between these substitutes.

Frequently Asked Questions (FAQ)

Q: Can AP22814BM8-13 be used as a direct replacement for AP22814AM8-13?

A: Yes. Both parts are parametric equivalents with identical electrical performance, output current rating (3A), on-resistance (50mOhm), voltage operating range (2.7V ~ 5.5V), and 8-MSOP package configuration. No circuit modifications are required.

Q: Are there differences in fault protection between these parts?

A: No. Both AP22814AM8-13 and AP22814BM8-13 implement identical fault protection: Current Limiting (Fixed), Over Temperature, and UVLO (Under Voltage Lock Out).

Q: Do these parts have the same package footprint?

A: Yes. Both use the 8-MSOP package with 0.118" width and 3.00mm dimensions. PCB footprints are identical.

Q: What is the significance of the part number suffix difference (AM8 vs BM8)?

A: The suffix indicates manufacturing date code or production batch designation within the AP22814 product family. Electrical and mechanical specifications remain equivalent.

Q: Are both parts RoHS compliant?

A: Yes. Both AP22814AM8-13 and AP22814BM8-13 are ROHS3 compliant with MSL Level 1 rating (Unlimited moisture sensitivity).

Q: Can these parts be used in high-temperature applications?

A: Both parts operate across -40°C to 85°C ambient temperature range with integrated over-temperature fault protection. Application-specific thermal analysis is required for designs operating near upper temperature limits.