AP22811AM8-13 Equivalent & Substitute Parts

Part Overview

The AP22811AM8-13 is an active P-Channel power switch/driver manufactured by Diodes Incorporated, designed for USB switching applications. This component operates as a 1:1 high-side switch with integrated load discharge and status flag capabilities. The device is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across different packaging or distribution formats.

Substiute Parts

AP22811AM8-13

Diodes IncorporatedIn Stock: 20123AP22811AM8-13 Datasheet

Current PartRFQ

AP22811BM8-13

Diodes IncorporatedIn Stock: 20216AP22811BM8-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP22811AM8-13 is determined by strict equivalence across the following critical parameters:

• Switch Type: USB Switch
• Output Type: P-Channel
• Ratio - Input:Output: 1:1
• Output Configuration: High Side
• Current - Output (Max): 2A
• Voltage - Load: 2.7V ~ 5.5V
• Rds On (Typ): 50mOhm
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

The AP22811BM8-13 qualifies as a parametric equivalent substitute. The only difference between these parts is the packaging format: AP22811AM8-13 is supplied in Cut Tape (CT) & Digi-Reel® format, while AP22811BM8-13 is supplied in Tape & Reel (TR) format. Both parts share identical electrical specifications, mechanical dimensions, and regulatory compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both AP22811AM8-13 and AP22811BM8-13 are Active status products manufactured by Diodes Incorporated with identical ROHS3 compliance and REACH unaffected certifications. Selection between these parts is determined by packaging and supply chain requirements rather than electrical or mechanical performance differences.

The AP22811AM8-13 in Cut Tape (CT) & Digi-Reel® format is suitable for applications requiring smaller order quantities or mixed component kits. The AP22811BM8-13 in Tape & Reel (TR) format is appropriate for high-volume production environments where automated pick-and-place assembly is employed. Both parts maintain the same MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can AP22811BM8-13 be used as a direct replacement for AP22811AM8-13?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format: Cut Tape (CT) & Digi-Reel® versus Tape & Reel (TR). PCB footprint, pin configuration, and electrical performance are identical.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) & Digi-Reel® format supplies components on tape that is cut into smaller segments, suitable for manual assembly or small-batch production. Tape & Reel (TR) format supplies components on continuous tape wound on a reel, optimized for automated assembly equipment in high-volume manufacturing.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both AP22811AM8-13 and AP22811BM8-13 share identical electrical specifications including 2A maximum output current, 50mOhm typical on-resistance, and -40°C to 85°C operating temperature range.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS coding.

Q: What is the MSL rating and why does it matter?

A: Both parts have an MSL rating of 1 (Unlimited), meaning there are no moisture sensitivity constraints. Components can be stored indefinitely without special humidity control or desiccant packaging requirements.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the assembly process can accommodate the packaging format. If your production line uses automated tape-fed equipment, use AP22811BM8-13 (TR). If using manual assembly or cut-tape compatible equipment, use AP22811AM8-13 (CT).