AP22804BW5-7 Equivalent & Substitute Parts

Part Overview

The AP22804BW5-7 is an active Power Management IC (PMIC) manufactured by Diodes Incorporated, functioning as a USB Power Switch/Driver with P-Channel output configuration. This component operates as a 1:1 high-side switch rated for 2.5A maximum output current in a SOT-25 surface mount package. The part is actively produced and stocked, with 10,250 units available in Tape & Reel packaging. Identifying equivalent substitute parts is necessary to ensure supply chain flexibility, optimize procurement across different packaging formats, and maintain design continuity when primary part availability is constrained.

Substiute Parts

AP22804BW5-7

Diodes IncorporatedIn Stock: 10320AP22804BW5-7 Datasheet

Current PartRFQ

AP22804AW5-7

Diodes IncorporatedIn Stock: 889052AP22804AW5-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AP22804BW5-7 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Switch Type: USB Switch
• Output Type: P-Channel, High Side configuration
• Number of Outputs: 1 (1:1 ratio)
• Current Rating: 2.5A maximum output
• Voltage Range: 2.7V ~ 5.5V load voltage
• On-Resistance: 50mOhm typical
• Input Interface: Non-Inverting On/Off control
• Protection Features: Current Limiting (Fixed), Over Temperature, UVLO
• Operating Temperature Range: -40°C ~ 85°C
• Package Type: SOT-25 (SC-74A, SOT-753)
• Mounting: Surface Mount
• Compliance: ROHS3, MSL 1

The AP22804AW5-7 meets all these criteria and is therefore a parametric equivalent. The only difference between the main part and substitute is the packaging format: the main part is supplied in Tape & Reel (TR), while the substitute is available in Cut Tape (CT) & Digi-Reel® format. Both parts share the identical base product number (AP22804) and are manufactured by Diodes Incorporated.

Parameter Comparison

Engineering Selection Recommendations

Both the AP22804BW5-7 and AP22804AW5-7 are active products manufactured by Diodes Incorporated with identical electrical and thermal specifications. Selection between these parts should be based on procurement and assembly requirements:

The AP22804BW5-7 in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The AP22804AW5-7 in Cut Tape & Digi-Reel® format provides flexibility for lower-volume production runs, prototyping, or mixed-component assembly scenarios.

Both parts maintain full ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard surface mount assembly processes and storage conditions. The identical electrical performance, protection features, and operating temperature range guarantee functional interchangeability in circuit design.

Frequently Asked Questions (FAQ)

Q: Are AP22804BW5-7 and AP22804AW5-7 electrically identical?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including 2.5A output current, 50mOhm on-resistance, 2.7V ~ 5.5V load voltage range, and all protection features (current limiting, over-temperature, UVLO).

Q: What is the difference between these two part numbers?

A: The only difference is the packaging format. AP22804BW5-7 is supplied in Tape & Reel (TR), while AP22804AW5-7 is supplied in Cut Tape (CT) & Digi-Reel® format. The physical component, die, and performance are identical.

Q: Can I substitute AP22804AW5-7 for AP22804BW5-7 in my design?

A: Yes, from an electrical and functional perspective. However, verify that your assembly process and equipment can accommodate the different packaging format. Tape & Reel is optimized for continuous automated feeding, while Cut Tape & Digi-Reel® is better suited for lower-volume or mixed-component assembly.

Q: Are both parts currently in production?

A: Yes. Both AP22804BW5-7 and AP22804AW5-7 are active products with current manufacturing status.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited moisture sensitivity level) rating.

Q: What is the SOT-25 package specification?

A: SOT-25 refers to the Small Outline Transistor package with 5 leads. The physical case designation is SC-74A or SOT-753. Both parts use this identical surface mount package.

Q: Can I use these parts interchangeably in high-volume production?

A: From a component specification standpoint, yes. However, production logistics should be considered: Tape & Reel format is standard for high-volume automated lines, while Cut Tape & Digi-Reel® may require different feeder equipment or manual handling depending on your assembly setup.