AP130-35YRG-13 Equivalent & Substitute Parts

Part Overview

The AP130-35YRG-13 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed output regulation at 4.6V with 300mA output current capacity. This Surface Mount device in SOT-89R-3 package is currently Active in product status with 706 units in stock. The AP130-35YRG-13 operates across the industrial temperature range of -40°C to 85°C and includes integrated protection features for over-current, over-temperature, and short-circuit conditions. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter set.

Substiute Parts

AP130-35YRG-13

Diodes IncorporatedIn Stock: 803AP130-35YRG-13 Datasheet

Current PartRFQ

AP130-35YRL-13

Diodes IncorporatedIn Stock: 5172AP130-35YRL-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AP130-35YRG-13 are identified based on strict electrical and mechanical parameter equivalence. The critical parameters determining substitution eligibility are: fixed output voltage of 4.6V, output current rating of 300mA, maximum input voltage of 5.5V, maximum dropout voltage of 0.5V at 300mA, quiescent current of 100 µA, PSRR of 58dB at 100Hz, SOT-89R-3 package configuration, operating temperature range of -40°C to 85°C, and integrated protection features (over-current, over-temperature, short-circuit). Parts meeting all these parameters are classified as parametric equivalents and may be substituted in applications where the main part is specified.

Parameter Comparison

Engineering Selection Recommendations

The AP130-35YRL-13 is classified as a parametric equivalent to the AP130-35YRG-13. Both parts are manufactured by Diodes Incorporated and maintain identical electrical specifications and mechanical packaging. The AP130-35YRL-13 is currently listed as Discontinued at DiGi Electronics, while the AP130-35YRG-13 maintains Active product status with 706 units in stock. Both parts are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements. Selection between these parts should be based on availability and supply chain considerations, as electrical performance and compliance certifications are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the AP130-35YRL-13 be used as a direct replacement for the AP130-35YRG-13?

A: Yes. Both parts are parametric equivalents with identical output voltage (4.6V), output current (300mA), dropout voltage (0.5V @ 300mA), quiescent current (100 µA), PSRR (58dB at 100Hz), package configuration (SOT-89R-3), operating temperature range (-40°C to 85°C), and protection features. Electrical performance and mechanical compatibility are equivalent.

Q: What is the significance of the packaging designation difference between the main part and substitute?

A: The main part AP130-35YRG-13 specifies Tape & Reel (TR) packaging, while the AP130-35YRL-13 packaging is not specified in available data. Both parts use the identical SOT-89R-3 supplier device package and TO-243AA case. The packaging designation refers to the delivery format (reel vs. alternative) rather than the component package itself, and does not affect electrical or mechanical compatibility.

Q: Are there compliance or certification differences between these parts?

A: No. Both the AP130-35YRG-13 and AP130-35YRL-13 are ROHS3 Compliant, REACH Unaffected, and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8542.39.0001). Moisture Sensitivity Level is 1 (Unlimited) for both parts.

Q: Why is the AP130-35YRL-13 listed as discontinued?

A: The AP130-35YRL-13 is marked as Discontinued at DiGi Electronics. However, 5100 units are reported in stock. Availability should be confirmed with the supplier before design implementation.