AP130-30YG-13 Equivalent & Substitute Parts

Part Overview

The AP130-30YG-13 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed 3V output applications. This Surface Mount device in SOT-89-3 package delivers 300mA output current with integrated protection features including over-current, over-temperature, and short-circuit protection. The part is Active status and ROHS3 compliant, making it suitable for modern electronic applications requiring regulated 3V power delivery with dropout voltage management.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set, allowing for design flexibility and supply chain optimization.

Key Parameters

Parameter	Value
Output Voltage (Fixed)	3V
Output Current	300mA
Input Voltage (Max)	5.5V
Dropout Voltage (Max)	0.5V @ 300mA
Quiescent Current	100 µA
PSRR	58dB (100Hz)
Operating Temperature Range	-40°C ~ 85°C
Package / Case	TO-243AA
Supplier Device Package	SOT-89-3
Protection Features	Over Current, Over Temperature, Short Circuit
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the AP130-30YG-13 are qualified based on electrical parameter equivalence and mechanical compatibility. The critical parameters determining substitution eligibility are:

Fixed output voltage of 3V
Output current capability of 300mA
Maximum input voltage of 5.5V
Dropout voltage specification of 0.5V @ 300mA
Quiescent current of 100 µA
PSRR of 58dB (100Hz)
Operating temperature range of -40°C ~ 85°C
Surface Mount mounting type with TO-243AA package
Identical protection features (Over Current, Over Temperature, Short Circuit)
ROHS3 compliance and equivalent regulatory status

The identified substitutes maintain all electrical specifications and regulatory compliance. Packaging format differences (Tape & Reel versus Cut Tape) represent supply chain variations without impact on component functionality or performance.

Parameter Comparison

Parameter	AP130-30YG-13	AP130-30YL-13	AP130-30YRL-13
Manufacturer	Diodes Incorporated	Diodes Incorporated	Diodes Incorporated
Output Voltage (Fixed)	3V	3V	3V
Output Current	300mA	300mA	300mA
Input Voltage (Max)	5.5V	5.5V	5.5V
Dropout Voltage (Max)	0.5V @ 300mA	0.5V @ 300mA	0.5V @ 300mA
Quiescent Current	100 µA	100 µA	100 µA
PSRR	58dB (100Hz)	58dB (100Hz)	58dB (100Hz)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	TO-243AA	TO-243AA	TO-243AA
Supplier Device Package	SOT-89-3	SOT-89-3	SOT-89R-3
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Protection Features	Over Current, Over Temperature, Short Circuit	Over Current, Over Temperature, Short Circuit	Over Current, Over Temperature, Short Circuit
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active
Packaging Format	Tape & Reel (TR)	Cut Tape (CT)	Cut Tape (CT)

Engineering Selection Recommendations

All three parts—AP130-30YG-13, AP130-30YL-13, and AP130-30YRL-13—are Active status components from Diodes Incorporated with identical electrical specifications and ROHS3 compliance. Selection between these parts is determined by packaging and supply requirements rather than functional performance.

The AP130-30YG-13 is supplied in Tape & Reel format, suitable for high-volume automated assembly operations. The AP130-30YL-13 and AP130-30YRL-13 are supplied in Cut Tape format, appropriate for lower-volume applications or manual assembly workflows. The AP130-30YRL-13 uses SOT-89R-3 package variant while AP130-30YL-13 uses standard SOT-89-3, both maintaining mechanical compatibility with TO-243AA case specification.

All parts meet identical regulatory requirements (ROHS3 compliant, REACH unaffected, EAR99 classification) and carry equivalent moisture sensitivity levels (MSL 1 - Unlimited).

Frequently Asked Questions (FAQ)

Q: Can AP130-30YL-13 or AP130-30YRL-13 be used as direct replacements for AP130-30YG-13?

A: Yes. All three parts maintain identical electrical specifications including 3V fixed output, 300mA current capability, 0.5V dropout voltage, and protection features. Substitution is valid from an electrical and functional standpoint. Packaging format differences (Tape & Reel versus Cut Tape) do not affect component performance.

Q: What is the difference between SOT-89-3 and SOT-89R-3 packages?

A: Both package variants are mechanically compatible with the TO-243AA case specification. The SOT-89R-3 designation indicates a reel-specific variant used in the AP130-30YRL-13. This represents a supplier packaging variation without impact on electrical performance or PCB layout compatibility.

Q: Are there inventory or supply considerations when selecting between these substitutes?

A: Inventory levels differ across the three parts. AP130-30YRL-13 has 3800 Pcs in stock, AP130-30YL-13 has 2700 Pcs, and AP130-30YG-13 has 2600 Pcs. Supply chain requirements may influence part selection, but electrical equivalence is maintained across all options.

Q: Do all three parts meet the same compliance standards?

A: Yes. All parts are ROHS3 compliant, REACH unaffected, classified as EAR99, and carry MSL 1 (Unlimited) moisture sensitivity rating. Regulatory and environmental compliance is equivalent across all three part numbers.

Q: Which part should be selected for new designs?

A: Selection depends on manufacturing process requirements. For automated high-volume assembly, AP130-30YG-13 (Tape & Reel) is appropriate. For lower-volume or mixed-assembly operations, AP130-30YL-13 or AP130-30YRL-13 (Cut Tape) are suitable. Electrical performance is identical across all options.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message