AP130-15WG-7 Equivalent & Substitute Parts

Part Overview

The AP130-15WG-7 is a linear voltage regulator IC from Diodes Incorporated, classified as a Power Management (PMIC) component. It delivers a fixed positive output of 1.5V at 300mA with a maximum dropout voltage of 0.5V. The device is housed in an SC-59-3 package and is currently in active production status. Substitute parts are necessary when the SC-59-3 package variant is unavailable or when alternative package configurations are required for specific board layout or assembly requirements.

Substiute Parts

AP130-15WG-7

Diodes IncorporatedIn Stock: 1156AP130-15WG-7 Datasheet

Current PartRFQ

AP130-15RG-7

Diodes IncorporatedIn Stock: 3190AP130-15RG-7 Datasheet

Parametric EquivalentRFQ

AP130-15SAG-7

Diodes IncorporatedIn Stock: 1027AP130-15SAG-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP130-15WG-7 is determined by strict equivalence across the following critical parameters:

• Output voltage: 1.5V fixed
• Output current: 300mA
• Maximum input voltage: 5.5V
• Dropout voltage: 0.5V @ 300mA
• Quiescent current: 100 µA
• PSRR: 58dB (100Hz)
• Protection features: Over Current, Over Temperature, Short Circuit
• Operating temperature range: -40°C ~ 85°C
• Mounting type: Surface Mount
• Base product number: AP130
• Manufacturer: Diodes Incorporated
• RoHS and REACH compliance status

The substitute parts AP130-15RG-7 and AP130-15SAG-7 maintain identical electrical specifications and differ only in package configuration (SC-59R and SOT-23-3 respectively). All three parts share the same base product number AP130 and are manufactured by Diodes Incorporated with equivalent performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AP130-15WG-7, AP130-15RG-7, and AP130-15SAG-7—are active production components from Diodes Incorporated with identical electrical performance specifications. Each part maintains ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across applications.

Selection between these parts is determined solely by package configuration requirements:

• AP130-15WG-7: SC-59-3 package variant
• AP130-15RG-7: SC-59R package variant
• AP130-15SAG-7: SOT-23-3 package variant

All parts are suitable for direct substitution where package footprint compatibility exists. No electrical performance degradation occurs when substituting between these variants.

Frequently Asked Questions (FAQ)

Q: Can AP130-15RG-7 replace AP130-15WG-7 in an existing design?

A: Yes, provided the board layout accommodates the SC-59R package footprint. Electrical specifications are identical.

Q: What is the difference between SC-59-3, SC-59R, and SOT-23-3 packages?

A: These are three distinct package configurations for the same die. SC-59-3 and SC-59R are variants of the SC-59 package family, while SOT-23-3 is an alternative surface mount package. Physical dimensions and PCB footprints differ between these packages.

Q: Are all three parts suitable for the same operating temperature range?

A: Yes. All three parts operate across -40°C to 85°C (TA) with identical thermal performance characteristics.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All three parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Can I use AP130-15SAG-7 if my design specifies AP130-15WG-7?

A: Yes, if your PCB layout supports the SOT-23-3 package footprint. Electrical performance is equivalent across all three variants.

Q: Are there any compliance differences between the substitute parts?

A: No. All three parts maintain identical RoHS3 compliance and REACH unaffected status.