AOY2N60 Equivalent & Substitute Parts Reference

Part Overview

The AOY2N60 is an N-channel MOSFET (Metal Oxide) with a drain-source voltage of 600 V and a continuous drain current of 2A (Tc), supplied by Alpha & Omega Semiconductor Inc. It is housed in a TO-251-3 stub leads, IPak (TO-251B) package suitable for through-hole mounting. The part features a maximum power dissipation of 57W (Tc), a max gate-source voltage of ±30V, and is RoHS3 compliant with an MSL rating of 1 (unlimited). The AOY2N60 is classified as "Not For New Designs," necessitating identification of suitable alternative or equivalent models within the category of Transistors, FETs, MOSFETs in applications requiring matching key electrical and mechanical parameters.

Substiute Parts

AOY2N60

Alpha & Omega Semiconductor Inc.In Stock: 31825AOY2N60 Datasheet

Current PartRFQ

TK2Q60D(Q)

Toshiba Semiconductor and StorageIn Stock: 3083TK2Q60D(Q) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AOY2N60 within the Transistors, FETs, MOSFETs category must match the following key electrical and mechanical parameters: N-channel configuration, MOSFET technology, a drain to source voltage rating of 600 V, continuous drain current of 2A, comparable maximum drain-source on-resistance (Rds On), compatible gate threshold voltage (Vgs(th)), drive and gate voltage ratings (Vgs, Drive Voltage), maximum power dissipation capability, through-hole mounting as well as a TO-251-3 IPak-compatible package, and regulatory compliance (RoHS3, MSL 1). Only parts meeting all these requirements are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

The AOY2N60 is marked as "Not For New Designs," signifying its availability is limited for ongoing designs or that it is being phased out. In scenarios where regulatory compliance and supply chain reliability are required, the substitute TK2Q60D(Q) is a valid selection based on its active product status, ROHS3 compliance, and MSL 1 rating. Both parts share equivalent environmental compliances and are categorized under EAR99 for export classification.

Frequently Asked Questions (FAQ)

Q1: On what criteria can the TK2Q60D(Q) directly substitute AOY2N60?
A1: TK2Q60D(Q) meets all key substitutive criteria, including N-channel MOSFET technology, a drain to source voltage rating of 600 V, current capability of 2A, similar or lower Rds On, matching gate and input specifications, through-hole mounting, and identical TO-251-3 stub leads, IPak package.

Q2: Are there any differences in mechanical compatibility between AOY2N60 and TK2Q60D(Q)?
A2: Both AOY2N60 and TK2Q60D(Q) use the TO-251-3 stub leads, IPak package and are designed for through-hole mounting, ensuring mechanical compatibility within the same footprint.

Q3: Does the substitute part maintain compliance and supply chain requirements?
A3: Both parts are ROHS3 compliant, have MSL 1 (unlimited shelf life at room temperature), and carry identical ECCN and HTSUS codes, aligning with electronic component compliance and trade requirements.

Q4: Are there thermal or power dissipation considerations in substitution?
A4: Power dissipation values for AOY2N60 and TK2Q60D(Q) are 57W (Tc) and 60W (Tc) respectively. This ensures comparability for applications within these ratings.

Q5: Is the pinout or electrical interface identical?
A5: Each part is in the TO-251-3 IPak package, supporting direct substitution in circuits based on similar package outline and pin configuration provided for this package type.