AOTF7T60PL N-Channel 600V 7A MOSFET Equivalent & Substitute Parts

Part Overview

The AOTF7T60PL is an N-Channel MOSFET manufactured by Alpha & Omega Semiconductor Inc., rated for 600V drain-to-source voltage and 7A continuous drain current in a TO-220-3F through-hole package. This device is classified as obsolete product status. Due to its obsolete classification, equivalent substitute parts from active product lines are necessary to maintain design continuity and ensure long-term component availability for new production runs and field replacements.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	7	A
On-State Resistance (Rds On) @ Id, Vgs	1.1 Ohm @ 3.5A, 10V	Ohm
Gate-Source Threshold Voltage (Vgs(th)) @ Id	5	V @ 250µA
Gate Charge (Qg) @ Vgs	25	nC @ 10V
Maximum Gate-Source Voltage (Vgs)	±30	V
Input Capacitance (Ciss) @ Vds	965	pF @ 100V
Power Dissipation (Max)	29	W
Operating Temperature Range	-55 to 150	°C
Package Type	TO-220-3	Through Hole
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—

Substitute Part Grouping Explanation

Substitution of the AOTF7T60PL is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Drain-to-Source Voltage (Vdss): Must equal or exceed 600V
Continuous Drain Current (Id): Must equal or exceed 7A at 25°C
Gate-Source Voltage Range (Vgs): Must accommodate ±30V or greater
Package Type: Must be TO-220-3 through-hole configuration
FET Type: N-Channel MOSFET technology

Secondary Compatibility Parameters:

On-State Resistance (Rds On): Lower or equal values ensure equivalent or improved performance
Gate Charge (Qg): Lower values reduce switching losses
Operating Temperature Range: Must support -55°C to 150°C minimum
Input Capacitance (Ciss): Affects switching characteristics

Substitute parts are grouped into two categories:

Category A - Direct Current Rating Match (7A): Parts meeting or exceeding 7A continuous drain current with 600V Vdss rating.

Category B - Reduced Current Rating (4A to 5.5A): Parts with lower current ratings but equivalent voltage ratings, suitable for applications where the full 7A capability is not required.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (Ohm)	Vgs(th) (V)	Qg (nC)	Vgs Max (V)	Ciss (pF)	Pd Max (W)	Temp Range (°C)	Package	Status
AOTF7T60PL	Alpha & Omega	600	7	1.1 @ 3.5A, 10V	5 @ 250µA	25 @ 10V	±30	965 @ 100V	29	-55 to 150	TO-220-3F	Obsolete
STP9NK60ZFP	STMicroelectronics	600	7	0.95 @ 3.5A, 10V	4.5 @ 100µA	53 @ 10V	±30	1110 @ 25V	30	-55 to 150	TO-220-3	Active
R6008FNX	Rohm Semiconductor	600	8	0.95 @ 4A, 10V	4 @ 1mA	20 @ 10V	±30	580 @ 25V	50	-55 to 150	TO-220-3	Active
STF7N60M2	STMicroelectronics	600	5	0.95 @ 2.5A, 10V	4 @ 250µA	8.8 @ 10V	±25	271 @ 100V	20	-55 to 150	TO-220-3	Active
STF6N62K3	STMicroelectronics	620	5.5	1.28 @ 2.8A, 10V	4.5 @ 50µA	34 @ 10V	±30	875 @ 50V	30	-55 to 150	TO-220-3	Active
FQPF7N60	onsemi	600	4.3	1 @ 2.2A, 10V	5 @ 250µA	38 @ 10V	±30	1430 @ 25V	48	-55 to 150	TO-220-3	Obsolete
AOTF4N60L	Alpha & Omega	600	4	2.2 @ 2A, 10V	4.5 @ 250µA	18 @ 10V	±30	615 @ 25V	35	-55 to 150	TO-220-3	Active
R6004ENX	Rohm Semiconductor	600	4	0.98 @ 1.5A, 10V	4 @ 1mA	15 @ 10V	±20	250 @ 25V	40	-55 to 150	TO-220-3	Active
R6004KNX	Rohm Semiconductor	600	4	0.98 @ 1.5A, 10V	5 @ 1mA	10.2 @ 10V	±20	280 @ 25V	40	-55 to 150	TO-220-3	Active
STF6N60M2	STMicroelectronics	600	4.5	1.2 @ 2.25A, 10V	4 @ 250µA	8 @ 10V	±25	232 @ 100V	20	-55 to 150	TO-220-3	Active

Engineering Selection Recommendations

Primary Recommendation - Direct Equivalent (7A Rating):

STP9NK60ZFP (STMicroelectronics) is the primary substitute for AOTF7T60PL. This part maintains identical 600V Vdss and 7A continuous drain current specifications. The device is in active product status with RoHS3 compliance and REACH unaffected designation. Operating temperature range matches the original part (-55°C to 150°C). The TO-220-3 package provides mechanical compatibility. Lower on-state resistance (0.95 Ohm vs. 1.1 Ohm) and reduced gate charge (53 nC vs. 25 nC) represent measurable performance characteristics within the SuperMESH™ technology platform.

Secondary Recommendation - Higher Current Capability:

R6008FNX (Rohm Semiconductor) provides 8A continuous drain current at 600V, exceeding the original 7A specification. Active product status with RoHS3 compliance and full temperature range support (-55°C to 150°C) ensure long-term availability. The TO-220-3 package maintains mechanical compatibility. This part is suitable for applications requiring additional current margin.

Alternative Options - Reduced Current Rating:

For applications where the full 7A capability is not required, the following active parts provide 600V operation with reduced current ratings:

STF7N60M2 (STMicroelectronics): 5A rating, active status, MDmesh™ II Plus technology, significantly reduced gate charge (8.8 nC)
STF6N62K3 (STMicroelectronics): 5.5A rating at 620V, active status, SuperMESH3™ technology
STF6N60M2 (STMicroelectronics): 4.5A rating, active status, MDmesh™ II Plus technology
AOTF4N60L (Alpha & Omega): 4A rating, active status, same manufacturer as original part
R6004ENX or R6004KNX (Rohm Semiconductor): 4A rating, active status, RoHS3 compliant

All recommended substitutes maintain TO-220-3 through-hole packaging and support the full -55°C to 150°C operating temperature range. Selection should be based on specific application current requirements and thermal management constraints.

Frequently Asked Questions (FAQ)

Q: Can STP9NK60ZFP directly replace AOTF7T60PL in existing designs?

A: Yes. STP9NK60ZFP maintains identical voltage (600V) and current (7A) ratings with compatible TO-220-3 packaging. Gate drive voltage requirements (10V) and maximum gate-source voltage (±30V) are equivalent. The part is in active production status with current availability.

Q: What is the difference between Category A and Category B substitutes?

A: Category A substitutes (STP9NK60ZFP, R6008FNX) maintain or exceed the original 7A continuous drain current rating at 600V. Category B substitutes (STF7N60M2, STF6N62K3, AOTF4N60L, R6004 series) provide reduced current ratings (4A to 5.5A) but maintain 600V voltage capability. Category B parts are suitable only for applications where the full 7A capability is not required.

Q: Are all substitute parts RoHS3 compliant?

A: All recommended active substitute parts carry RoHS3 compliance certification. The original AOTF7T60PL does not specify RoHS status. REACH compliance is unaffected for all parts listed.

Q: What is the significance of on-state resistance (Rds On) differences?

A: Lower Rds On values reduce conduction losses and heat generation. STP9NK60ZFP (0.95 Ohm) and R6008FNX (0.95 Ohm) provide lower Rds On than the original part (1.1 Ohm), resulting in improved thermal performance. This is a beneficial characteristic for direct substitution.

Q: How does gate charge (Qg) affect circuit performance?

A: Gate charge determines the energy required to switch the MOSFET on and off. Lower gate charge reduces switching losses and allows faster switching speeds. STP9NK60ZFP exhibits higher gate charge (53 nC vs. 25 nC), which may increase switching losses in high-frequency applications. STF7N60M2 and STF6N60M2 provide significantly lower gate charge (8.8 nC and 8 nC respectively) for reduced switching losses.

Q: Can I use R6008FNX (8A) instead of STP9NK60ZFP (7A)?

A: Yes. R6008FNX provides higher current capability (8A vs. 7A) at the same 600V rating, making it suitable for applications requiring additional current margin. The part is in active status with full temperature range support and RoHS3 compliance.

Q: What is the impact of different gate-source threshold voltages (Vgs(th))?

A: Vgs(th) determines the gate voltage at which the MOSFET begins to conduct. The original part specifies 5V @ 250µA. Most substitutes range from 4V to 5V at different measurement currents. Variations within this range are compatible with standard gate drive circuits operating at 10V.

Q: Are there package differences between substitute parts?

A: All recommended substitutes use TO-220-3 through-hole packaging, maintaining mechanical compatibility with the original AOTF7T60PL. Minor package designations (TO-220F, TO-220FM, TO-220FP) indicate manufacturer-specific thermal and mechanical enhancements but are functionally equivalent for standard PCB mounting.

Q: Why is FQPF7N60 listed but not recommended as primary substitute?

A: FQPF7N60 is classified as obsolete product status, similar to the original AOTF7T60PL. While it maintains 600V rating, the 4.3A current rating falls below the original 7A specification. Active product alternatives provide better long-term availability assurance.

Q: What is the operating temperature range significance?

A: All recommended substitutes support -55°C to 150°C operating range, matching the original part. This ensures thermal compatibility across industrial and automotive temperature specifications. R6004ENX specifies only 150°C maximum (no minimum), which may limit use in extreme cold environments.

Q: How do I select between multiple active substitutes?

A: Selection depends on application requirements: (1) For direct replacement with identical current rating, use STP9NK60ZFP; (2) For applications requiring higher current margin, use R6008FNX; (3) For reduced switching losses, use STF7N60M2 or STF6N60M2; (4) For cost optimization with reduced current requirements, use AOTF4N60L or R6004 series.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message