AOT462 N-Channel 60V 70A MOSFET Equivalent & Substitute Parts

Part Overview

The AOT462 is an N-Channel MOSFET manufactured by Alpha & Omega Semiconductor Inc., rated for 60V drain-to-source voltage and 70A continuous drain current in a Through Hole TO-220 package. This device is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing applications and new designs. Substitute parts must maintain electrical compatibility across voltage, current, and thermal specifications while accommodating the through-hole mounting requirement.

Key Parameters

Parameter	AOT462 Specification
Drain-to-Source Voltage (Vdss)	60 V
Continuous Drain Current (Id) @ 25°C	70 A
On-State Resistance (Rds On) @ Id, Vgs	18 mOhm @ 30A, 10V
Gate Threshold Voltage (Vgs(th)) @ Id	4 V @ 250 µA
Gate Charge (Qg) @ Vgs	36 nC @ 10 V
Input Capacitance (Ciss) @ Vds	2400 pF @ 30 V
Power Dissipation (Max)	100 W
Operating Temperature Range	-55°C to 175°C
Mounting Type	Through Hole
Package	TO-220-3
Technology	MOSFET (Metal Oxide)
FET Type	N-Channel

Substitute Part Grouping Explanation

Substitution of the AOT462 is determined by the following critical parameters:

Electrical Compatibility Requirements:

Drain-to-Source Voltage (Vdss) must equal or exceed 60V
Continuous Drain Current (Id) must equal or exceed 70A at 25°C
Gate Threshold Voltage (Vgs(th)) must be compatible with 10V drive voltage
Maximum Gate Voltage (Vgs Max) must accommodate ±20V
Operating temperature range must span -55°C to 175°C

Mechanical Compatibility Requirements:

Mounting type must be Through Hole
Package must be TO-220 or TO-220-3 configuration
Pin configuration must be compatible with three-terminal TO-220 layout

Performance Considerations:

On-state resistance (Rds On) affects thermal performance and power dissipation
Gate charge (Qg) influences switching speed and drive circuit requirements
Input capacitance (Ciss) impacts gate drive circuit design

Substitute parts are grouped into two categories: direct replacements meeting or exceeding all electrical specifications with identical packaging, and functional alternatives with modified electrical characteristics suitable for specific application requirements.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Qg (nC)	Ciss (pF)	Power Diss. (W)	Tj Range (°C)	Package	Status
AOT462	Alpha & Omega Semiconductor	60	70	18 @ 30A, 10V	36 @ 10V	2400 @ 30V	100	-55 to 175	TO-220-3	Obsolete
CSD18537NKCS	Texas Instruments	60	50	14 @ 25A, 10V	18 @ 10V	1480 @ 30V	94	-55 to 150	TO-220-3	Active
IRF1010EPBF	Infineon Technologies	60	84	12 @ 50A, 10V	130 @ 10V	3210 @ 25V	200	-55 to 175	TO-220-3	Not For New Designs
IRFB3806PBF	Infineon Technologies	60	43	15.8 @ 25A, 10V	30 @ 10V	1150 @ 50V	71	-55 to 175	TO-220-3	Active
IRFZ44VZPBF	Infineon Technologies	60	57	12 @ 34A, 10V	65 @ 10V	1690 @ 25V	92	-55 to 175	TO-220-3	Not For New Designs
IRFZ46NPBF	Infineon Technologies	55	53	16.5 @ 28A, 10V	72 @ 10V	1696 @ 25V	107	-55 to 175	TO-220-3	Not For New Designs
PSMN015-60PS,127	Nexperia USA Inc.	60	50	14.8 @ 15A, 10V	20.9 @ 10V	1220 @ 30V	86	-55 to 175	TO-220-3	Obsolete
PSMN3R0-60PS,127	Nexperia USA Inc.	60	100	3 @ 25A, 10V	130 @ 10V	8079 @ 30V	306	-55 to 175	TO-220-3	Obsolete
PSMN4R6-60PS,127	Nexperia USA Inc.	60	100	4.6 @ 25A, 10V	70.8 @ 10V	4426 @ 30V	211	-55 to 175	TO-220-3	Obsolete
RFP70N06	onsemi	60	70	14 @ 70A, 10V	156 @ 20V	2250 @ 25V	150	-55 to 175	TO-220-3	Active

Engineering Selection Recommendations

Direct Current Rating Match (70A Continuous):

The RFP70N06 from onsemi provides the closest electrical match to the AOT462, with identical 60V Vdss and 70A continuous drain current ratings. This device is currently in Active product status, making it suitable for new designs and ongoing production. The RFP70N06 maintains the full operating temperature range of -55°C to 175°C and is packaged in TO-220-3 configuration. On-state resistance is 14 mOhm at 70A, 10V, compared to 18 mOhm for the AOT462, providing improved thermal performance. Power dissipation capability is 150W, exceeding the AOT462 specification of 100W.

Higher Current Capability Alternatives:

For applications requiring enhanced current handling or thermal margin, the PSMN4R6-60PS,127 and PSMN3R0-60PS,127 from Nexperia provide 100A continuous drain current ratings at 60V. Both devices maintain the -55°C to 175°C operating range and TO-220-3 packaging. The PSMN4R6-60PS,127 offers 4.6 mOhm on-state resistance with 211W power dissipation, while the PSMN3R0-60PS,127 provides superior 3 mOhm resistance with 306W dissipation. Both are classified as Obsolete but remain in stock inventory.

Active Product Alternatives with Reduced Current Rating:

The IRFB3806PBF from Infineon (Active status) provides 43A continuous current at 60V with 15.8 mOhm on-state resistance and 71W power dissipation. This device is suitable for applications where the full 70A rating is not required. The CSD18537NKCS from Texas Instruments (Active status) offers 50A continuous current with 14 mOhm on-state resistance and 94W power dissipation, with operating temperature range limited to -55°C to 150°C.

Compliance and Regulatory Status:

All substitute parts listed maintain ROHS3 compliance and REACH Unaffected status, consistent with the AOT462. All devices are rated for ±20V maximum gate voltage and feature gate threshold voltages compatible with 10V drive circuits.

Frequently Asked Questions (FAQ)

Q: Can the CSD18537NKCS replace the AOT462 in all applications?

A: The CSD18537NKCS is suitable for applications where continuous drain current does not exceed 50A. The device provides equivalent 60V voltage rating and TO-220-3 packaging. However, the operating temperature range is limited to -55°C to 150°C, compared to the AOT462 specification of -55°C to 175°C. Applications requiring operation above 150°C junction temperature require alternative selection.

Q: What is the primary advantage of the RFP70N06 over the AOT462?

A: The RFP70N06 matches the AOT462 current rating (70A) and voltage rating (60V) while maintaining Active product status. The device provides improved on-state resistance (14 mOhm versus 18 mOhm), resulting in lower power dissipation and improved thermal performance. The RFP70N06 is suitable for new designs and ongoing production without obsolescence concerns.

Q: Why do the PSMN4R6-60PS,127 and PSMN3R0-60PS,127 have higher gate charge specifications?

A: Higher gate charge (70.8 nC and 130 nC respectively, compared to 36 nC for the AOT462) reflects the larger die size required to achieve 100A continuous current rating. Increased gate charge requires proportionally higher gate drive current and longer switching times. These devices are appropriate for applications where the additional current capacity justifies the increased gate drive requirements.

Q: Is the IRFZ46NPBF a suitable substitute despite the 55V Vdss rating?

A: The IRFZ46NPBF has a 55V Vdss rating, which is 5V lower than the AOT462 specification of 60V. This device is not recommended as a direct substitute for applications requiring the full 60V voltage margin. The device is classified as Not For New Designs, further limiting its suitability for new applications.

Q: What packaging considerations apply to the DMNH6022SSD-13?

A: The DMNH6022SSD-13 is a dual N-Channel MOSFET array in 8-SOIC surface mount package, fundamentally different from the through-hole TO-220-3 configuration of the AOT462. This device is not suitable as a direct substitute due to incompatible mounting technology and package form factor. Surface mount assembly requires different PCB design and manufacturing processes.

Q: How do I determine if a substitute part is suitable for my specific application?

A: Verify that the substitute part meets or exceeds the following minimum requirements: (1) Drain-to-Source Voltage (Vdss) equal to or greater than 60V; (2) Continuous Drain Current (Id) equal to or greater than the application requirement; (3) Operating temperature range encompassing the application's maximum junction temperature; (4) Through-hole TO-220-3 package compatibility; (5) Gate threshold voltage compatible with available drive voltage. Consult device datasheets for detailed electrical characteristics and thermal performance curves.

Q: What is the significance of product status (Active, Obsolete, Not For New Designs)?

A: Active status indicates the manufacturer continues production and supports the device for new designs. Obsolete status indicates the manufacturer has discontinued production; existing inventory may be available but future supply is not guaranteed. Not For New Designs status indicates the manufacturer discourages use in new applications but may continue limited production for existing customers. For long-term production programs, Active status devices are preferred.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message