AOT20C60 N-Channel 600V 20A MOSFET Equivalent & Substitute Parts

Part Overview

The AOT20C60 is an N-Channel 600V 20A MOSFET manufactured by Alpha & Omega Semiconductor Inc., housed in a TO-220-3 package for through-hole mounting applications. This device is rated for continuous drain current of 20A at 25°C with a maximum power dissipation of 463W, making it suitable for high-current switching and power conversion circuits operating at 600V.

The AOT20C60 carries an Obsolete product status. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this component.

Key Parameters

Parameter	Value	Unit
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	20	A
On-State Resistance (Rds On) @ 10A, 10V	250	mOhm
Gate Threshold Voltage (Vgs(th)) @ 250µA	5	V
Gate Charge (Qg) @ 10V	74	nC
Power Dissipation (Max)	463	W
Operating Temperature Range	-55 to 150	°C
Package Type	TO-220-3	Through Hole

Substitute Part Grouping Explanation

Substitution of the AOT20C60 is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Drain to Source Voltage (Vdss): Minimum 600V (equal or higher voltage rating required)
Continuous Drain Current (Id): Minimum 15A (lower current ratings acceptable for reduced-current applications; higher ratings provide design margin)
On-State Resistance (Rds On): Maximum 280mOhm (lower resistance preferred for reduced power dissipation)
Gate Threshold Voltage (Vgs(th)): 3.5V to 5.5V (compatible gate drive voltage range)
Package Type: TO-220-3 (mechanical and thermal interface compatibility)
Operating Temperature: -55°C to 150°C (full temperature range support)

Substitution Logic: Parts are grouped into two categories based on current rating alignment:

Category A – Full Current Replacement (15A to 20A): Parts with continuous drain current ratings between 15A and 20A provide direct functional replacement with equivalent or superior thermal performance. These parts maintain the high-current capability of the original design.

Category B – Reduced Current Substitution (9A to 13.8A): Parts with continuous drain current ratings below 15A are suitable for applications where the full 20A capability is not required. These parts offer lower on-state resistance and reduced gate charge, beneficial for lower-current switching applications.

All substitute parts maintain 600V or higher Vdss rating, compatible gate drive characteristics, and TO-220-3 package compatibility.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On (mOhm)	Vgs(th) (V)	Qg (nC)	Pd Max (W)	Status
AOT20C60	Alpha & Omega	600	20	250	5	74	463	Obsolete
FCP260N60E	Fairchild	600	15	260	3.5	62	156	Active
IPP60R250CPXKSA1	Infineon	650	12	250	3.5	35	104	Obsolete
IPP60R280C6XKSA1	Infineon	600	13.8	280	3.5	43	104	Last Time Buy
IPP60R280E6XKSA1	Infineon	600	13.8	280	3.5	43	104	Obsolete
IXTP20N65XM	IXYS	650	9	210	5.5	35	63	Last Time Buy
SIHP15N60E-GE3	Vishay Siliconix	600	15	280	4	78	180	Active
SPP15N60C3XKSA1	Infineon	650	15	280	3.9	63	156	Active
STI20N60M2-EP	STMicroelectronics	600	13	278	4.75	21.7	110	Active
STP18N60M2	STMicroelectronics	600	13	280	4	21.5	110	Active
STP18NM60N	STMicroelectronics	600	13	285	4	35	110	Active

Engineering Selection Recommendations

Active Product Status Substitutes (Recommended for New Designs):

The following parts carry Active product status and are recommended for applications requiring long-term supply assurance and ongoing manufacturer support:

SIHP15N60E-GE3 (Vishay Siliconix): 15A continuous drain current, 600V Vdss, 280mOhm Rds On. Provides 75% of original current rating with comparable on-state resistance. RoHS3 compliant. Suitable for applications where 15A capability is sufficient.
SPP15N60C3XKSA1 (Infineon CoolMOS™): 15A continuous drain current, 650V Vdss, 280mOhm Rds On. Offers voltage margin above 600V specification. RoHS3 compliant. Infineon CoolMOS™ technology provides optimized gate charge characteristics.
STI20N60M2-EP (STMicroelectronics MDmesh™ M2-EP): 13A continuous drain current, 600V Vdss, 278mOhm Rds On. Lowest gate charge (21.7nC) among active substitutes, reducing switching losses. RoHS3 compliant. Suitable for high-frequency switching applications.
STP18N60M2 (STMicroelectronics MDmesh™ II Plus): 13A continuous drain current, 600V Vdss, 280mOhm Rds On. Low gate charge (21.5nC). RoHS3 compliant. Established product with high inventory availability (2260 units).
STP18NM60N (STMicroelectronics MDmesh™ II): 13A continuous drain current, 600V Vdss, 285mOhm Rds On. Highest inventory availability (24200 units). RoHS3 compliant. Suitable for cost-sensitive applications with extended supply chain security.
FCP260N60E (Fairchild SuperFET® II): 15A continuous drain current, 600V Vdss, 260mOhm Rds On. Lowest on-state resistance among 15A-rated substitutes. Active product status. Suitable for applications prioritizing reduced conduction losses.

Last Time Buy Status Substitutes (Transition Planning Required):

IPP60R280C6XKSA1 (Infineon CoolMOS™): 13.8A continuous drain current, 600V Vdss. Last Time Buy status requires transition planning to alternative sources.
IXTP20N65XM (IXYS Ultra X): 9A continuous drain current, 650V Vdss, 210mOhm Rds On. Last Time Buy status. Suitable only for applications with current requirements below 9A.

Obsolete Status Substitutes (Not Recommended for New Designs):

IPP60R250CPXKSA1 (Infineon CoolMOS™): Obsolete status. Inventory available (2815 units) for legacy system support only.
IPP60R280E6XKSA1 (Infineon CoolMOS™): Obsolete status. Inventory available (890 units) for legacy system support only.

Compliance and Certifications:

All recommended substitute parts carry RoHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements. All parts maintain ECCN EAR99 classification and HTSUS 8541.29.0095 or 8542.39.0001 tariff codes consistent with the original part.

Frequently Asked Questions (FAQ)

Q: Can the AOT20C60 be directly replaced with a 15A-rated substitute?

A: Yes, 15A-rated substitutes such as SIHP15N60E-GE3, SPP15N60C3XKSA1, and FCP260N60E provide functional replacement for applications where the full 20A capability is not required. These parts maintain 600V Vdss rating and compatible gate drive characteristics. However, thermal design must be re-evaluated, as power dissipation ratings are lower than the original 463W specification.

Q: What is the significance of gate charge (Qg) differences among substitute parts?

A: Gate charge directly affects switching speed and driver circuit requirements. Lower gate charge (such as STI20N60M2-EP at 21.7nC) reduces switching losses and allows faster switching transitions, beneficial for high-frequency applications. Higher gate charge (such as SIHP15N60E-GE3 at 78nC) requires more driver current but may provide improved noise immunity. Driver circuit compatibility must be verified based on the selected substitute.

Q: Are all substitute parts available in the same TO-220-3 package?

A: Yes, all listed substitute parts are housed in TO-220-3 or equivalent TO-220 through-hole packages, ensuring mechanical and thermal interface compatibility with the original AOT20C60 design. Printed circuit board layouts and heatsink mounting arrangements require no modification.

Q: Which substitute part offers the best thermal performance?

A: Thermal performance is determined by power dissipation rating and on-state resistance. FCP260N60E offers the lowest on-state resistance (260mOhm) among 15A-rated parts, reducing conduction losses. However, absolute power dissipation ratings vary significantly due to different current ratings. For applications requiring maximum thermal margin, SIHP15N60E-GE3 (180W) and SPP15N60C3XKSA1 (156W) provide superior power dissipation ratings compared to lower-current alternatives.

Q: What is the difference between Active, Last Time Buy, and Obsolete product status?

A: Active status indicates ongoing manufacturer production and support with indefinite availability. Last Time Buy status indicates the manufacturer will cease production after a specified date; existing inventory is available but future supply is limited. Obsolete status indicates production has ended; only existing inventory remains available. For new designs, Active status parts are strongly preferred. Last Time Buy and Obsolete parts are suitable for legacy system support and maintenance applications only.

Q: Can a 13A-rated substitute handle the same power levels as the 20A original part?

A: No. A 13A-rated substitute is limited to 13A continuous drain current and lower power dissipation. For example, STP18N60M2 is rated for 110W maximum power dissipation compared to the AOT20C60's 463W. Applications must be re-evaluated to ensure current and power requirements do not exceed the substitute part's ratings. Thermal design must account for the lower power dissipation capability.

Q: Are there any gate drive voltage compatibility concerns with substitute parts?

A: All substitute parts operate with 10V gate drive voltage, consistent with the original AOT20C60. Gate threshold voltages (Vgs(th)) range from 3.5V to 5.5V across substitutes, all within the ±20V to ±30V maximum gate voltage ratings. Existing gate driver circuits designed for the AOT20C60 are compatible with all listed substitutes without modification.

Q: Which substitute part has the highest inventory availability?

A: STP18NM60N (STMicroelectronics) has the highest inventory availability at 24,200 units. This part offers reliable supply chain security for high-volume production requirements. SIHP15N60E-GE3 (1,450 units) and SPP15N60C3XKSA1 (1,430 units) also provide substantial inventory levels.

Q: What is the voltage margin provided by 650V-rated substitutes compared to the 600V original?

A: Substitutes rated at 650V Vdss (IPP60R250CPXKSA1, IXTP20N65XM, SPP15N60C3XKSA1) provide an additional 50V safety margin above the 600V specification. This margin improves reliability in applications subject to voltage transients or overvoltage conditions. However, this higher voltage rating does not increase current capability or reduce on-state resistance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message