AOT1606L N-Channel MOSFET 60V 12A Equivalent & Substitute Parts

Part Overview

The AOT1606L is an N-Channel MOSFET manufactured by Alpha & Omega Semiconductor Inc., rated for 60V drain-to-source voltage with 12A continuous drain current at 25°C (Ta) and 178A at case temperature (Tc). The device is packaged in TO-220-3 through-hole configuration and operates across the temperature range of -55°C to 175°C (TJ). The AOT1606L is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing design support and production continuity. Substitute parts must maintain electrical compatibility across critical parameters including voltage rating, current handling capability, on-resistance characteristics, and thermal performance while accommodating the through-hole TO-220 package format.

Key Parameters

Parameter	AOT1606L Value	Unit
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current @ 25°C (Ta)	12	A
Continuous Drain Current @ Case (Tc)	178	A
Rds On (Max) @ 20A, 10V	6.3	mOhm
Gate Threshold Voltage (Vgs(th)) @ 250µA	3.7	V
Gate Charge (Qg) @ 10V	102	nC
Input Capacitance (Ciss) @ 25V	4500	pF
Power Dissipation (Ta)	2.1	W
Power Dissipation (Tc)	417	W
Operating Temperature Range (TJ)	-55 to 175	°C
Mounting Type	Through Hole	—
Package / Case	TO-220-3	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitute parts for the AOT1606L are selected based on strict electrical and mechanical compatibility criteria. All substitute candidates must satisfy the following requirements:

Mandatory Compatibility Parameters:

FET Type: N-Channel
Technology: MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss): 60V or higher
Continuous Drain Current (Tc): Equal to or greater than 178A
Package / Case: TO-220-3 through-hole configuration
Operating Temperature Range: -55°C to 175°C (TJ) minimum
On-Resistance (Rds On): 6.3 mOhm or lower at specified conditions

Substitute parts are grouped into two categories based on product status and availability:

Category 1: Active Status Substitutes — Parts with active product status and current manufacturing support. These parts are recommended for new designs and ongoing production.

Category 2: Not For New Designs / Obsolete Status — Parts with limited or discontinued support. These parts are suitable for legacy system maintenance and repair applications only.

All substitute parts maintain the same gate voltage range (±20V maximum) and operating temperature specifications as the AOT1606L, ensuring direct functional replacement in existing circuit topologies.

Parameter Comparison

Parameter	AOT1606L	CSD18533KCS	FDP070AN06A0	FDP5800	IPP057N06N3GXKSA1	IRF1407PBF	IXTP120N075T2	SUP90N06-6M0P-E3	TK4R3E06PL,S1X
Manufacturer	Alpha & Omega	Texas Instruments	Fairchild	onsemi	Infineon	International Rectifier	IXYS	Vishay Siliconix	Toshiba
FET Type	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel
Vdss (V)	60	60	60	60	60	75	75	60	60
Id @ 25°C Ta (A)	12	72	15	14	—	—	—	—	—
Id @ Tc (A)	178	100	80	80	80	130	120	90	80
Rds On (Max) @ 10V (mOhm)	6.3	6.3	7	6	5.7	7.8	7.7	6	7.2
Vgs(th) @ 250µA (V)	3.7	2.3	4	2.5	4	4	4	4.5	2.5
Gate Charge Qg @ 10V (nC)	102	34	66	145	82	250	78	120	48.2
Ciss @ Specified Vds (pF)	4500 @ 25V	3025 @ 30V	3000 @ 25V	9160 @ 15V	6600 @ 30V	5600 @ 25V	4740 @ 25V	4700 @ 30V	3280 @ 30V
Power Dissipation Tc (W)	417	192	175	242	115	330	250	272	87
Operating Temperature (°C)	-55 to 175	-55 to 175	-55 to 175	-55 to 175	-55 to 175	-55 to 175	-55 to 175	-55 to 175	to 175
Package	TO-220-3	TO-220-3	TO-220-3	TO-220-3	PG-TO220-3	TO-220AB	TO-220-3	TO-220AB	TO-220-3
Product Status	Obsolete	Active	Active	Active	Not For New Designs	Active	Active	Active	Active
RoHS Status	—	ROHS3 Compliant	—	ROHS3 Compliant	ROHS3 Compliant	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: CSD18533KCS (Texas Instruments)

The CSD18533KCS is the manufacturer-recommended substitute for the AOT1606L. This part is classified as Active status with current manufacturing support. The CSD18533KCS maintains the 60V Vdss rating and exceeds the continuous drain current requirement at case temperature (100A Tc versus 178A for AOT1606L). The on-resistance specification of 6.3 mOhm at 75A, 10V matches the AOT1606L exactly. The device features lower gate charge (34 nC versus 102 nC), resulting in faster switching characteristics and reduced gate drive power requirements. The CSD18533KCS is ROHS3 compliant and carries REACH Unaffected status. Inventory availability is substantial at 5,900 pieces.

Secondary Recommendation: SUP90N06-6M0P-E3 (Vishay Siliconix)

The SUP90N06-6M0P-E3 is an Active status part with 60V Vdss and 90A continuous drain current at case temperature. The on-resistance of 6 mOhm at 20A, 10V is superior to the AOT1606L specification. This part is ROHS3 compliant and carries REACH Affected status. Gate charge of 120 nC is higher than the CSD18533KCS but lower than the AOT1606L. Inventory availability is 2,054 pieces.

Tertiary Recommendation: TK4R3E06PL,S1X (Toshiba Semiconductor and Storage)

The TK4R3E06PL,S1X is an Active status part with 60V Vdss and 80A continuous drain current at case temperature. The on-resistance of 7.2 mOhm at 15A, 4.5V is acceptable for the application. This part features the lowest gate charge among all substitutes at 48.2 nC, enabling efficient gate drive circuits. The device is ROHS3 compliant. Inventory availability is 959 pieces.

Not Recommended for New Designs: IPP057N06N3GXKSA1 (Infineon Technologies)

The IPP057N06N3GXKSA1 carries a "Not For New Designs" product status classification. Although this part meets electrical requirements with 60V Vdss and 80A continuous drain current at case temperature, its discontinued design status makes it unsuitable for new applications. This part is retained in the comparison for legacy system maintenance purposes only.

Higher Voltage Alternatives: IRF1407PBF and IXTP120N075T2

The IRF1407PBF (International Rectifier) and IXTP120N075T2 (IXYS) both feature 75V Vdss ratings, exceeding the AOT1606L specification. These parts are suitable only for applications where the higher voltage rating provides system-level benefits. The 75V rating introduces additional on-resistance and gate charge characteristics that may not be optimal for 60V-rated circuit designs. These parts are not recommended as direct substitutes unless circuit topology specifically requires the higher voltage margin.

Frequently Asked Questions (FAQ)

Q: Can the CSD18533KCS directly replace the AOT1606L in existing PCB layouts?

A: Yes. The CSD18533KCS is packaged in TO-220-3, matching the AOT1606L pinout and footprint. Pin-for-pin compatibility is maintained across gate, drain, and source terminals. No PCB modifications are required.

Q: What is the significance of the continuous drain current difference between the AOT1606L (178A Tc) and substitute parts?

A: The AOT1606L specification of 178A at case temperature represents the maximum current the device can conduct under ideal thermal conditions. Substitute parts with lower Tc ratings (80A to 100A) are still suitable for applications where the actual circuit current does not exceed these limits. Circuit design must verify that operating current remains within the substitute part's continuous drain current specification.

Q: Why do some substitute parts have lower gate charge than the AOT1606L?

A: Gate charge (Qg) determines the energy required to switch the MOSFET on and off. Lower gate charge values (such as 34 nC for CSD18533KCS versus 102 nC for AOT1606L) enable faster switching transitions and reduce gate driver power dissipation. This is a beneficial characteristic that improves circuit efficiency without compromising functionality.

Q: Are all substitute parts ROHS3 compliant?

A: Most substitute parts listed carry ROHS3 compliance certification. The CSD18533KCS, FDP5800, IPP057N06N3GXKSA1, IXTP120N075T2, SUP90N06-6M0P-E3, and TK4R3E06PL,S1X are all ROHS3 compliant. The FDP070AN06A0 and IRF1407PBF do not specify ROHS status in the provided data. Verify ROHS compliance requirements with your procurement specifications before final part selection.

Q: What is the difference between TO-220-3 and TO-220AB packaging?

A: Both TO-220-3 and TO-220AB are through-hole packages with identical pin configurations and thermal characteristics. The designations refer to minor mechanical variations in lead forming and mounting tab design. Parts specified as TO-220AB are functionally equivalent to TO-220-3 for circuit applications. Verify mechanical compatibility with your specific PCB mounting hardware.

Q: Can I use the IRF1407PBF or IXTP120N075T2 as substitutes despite their 75V Vdss rating?

A: These parts are electrically compatible with 60V circuit designs because they exceed the voltage requirement. However, the higher voltage rating typically results in increased on-resistance and gate charge characteristics. Use these parts only if your circuit design specifically benefits from the additional voltage margin or if lower-voltage alternatives are unavailable.

Q: What does "Not For New Designs" status mean for the IPP057N06N3GXKSA1?

A: "Not For New Designs" indicates that the manufacturer (Infineon) has discontinued active development and marketing of this part. The device remains available for existing customer support and legacy system maintenance. New circuit designs should not incorporate this part. Use the IPP057N06N3GXKSA1 only for replacement in existing systems where the original AOT1606L is no longer available.

Q: How do I verify that a substitute part is suitable for my specific application?

A: Compare the following critical parameters between the AOT1606L and the substitute part: (1) Drain-to-source voltage (Vdss) must equal or exceed 60V; (2) Continuous drain current at case temperature (Tc) must equal or exceed your circuit's maximum operating current; (3) On-resistance (Rds On) must be acceptable for your power dissipation budget; (4) Gate threshold voltage (Vgs(th)) must be compatible with your gate driver circuit; (5) Operating temperature range must encompass your application environment. Consult the detailed datasheets for all electrical specifications before finalizing part selection.

Q: What inventory levels are available for each substitute part?

A: Current inventory levels are as follows: CSD18533KCS (5,900 pieces), FDP070AN06A0 (15,126 pieces), FDP5800 (1,450 pieces), IPP057N06N3GXKSA1 (4,450 pieces), IRF1407PBF (42,110 pieces), IXTP120N075T2 (841 pieces), SUP90N06-6M0P-E3 (2,054 pieces), TK4R3E06PL,S1X (959 pieces). Inventory levels are subject to change. Verify current availability with your component supplier before placing production orders.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message