AON6360 Equivalent & Substitute Parts

Part Overview

The AON6360 is an N-Channel MOSFET rated for 30V drain-to-source voltage with continuous drain current of 36A (Ta) and 85A (Tc). This device is packaged in a Surface Mount 8-DFN (5x6) configuration and is classified as Not For New Designs. Due to its discontinued design status, equivalent substitute parts with comparable electrical and mechanical specifications are available from multiple manufacturers. Substitutes maintain the same voltage rating, package footprint compatibility, and thermal performance characteristics while offering active product status for ongoing production applications.

Substiute Parts

AON6360

Alpha & Omega Semiconductor Inc.In Stock: 6332AON6360 Datasheet

Current PartRFQ

AON6354

Alpha & Omega Semiconductor Inc.In Stock: 90337AON6354 Datasheet

MFR RecommendedRFQ

PJQ5424_R2_00001

Panjit International Inc.In Stock: 3495PJQ5424_R2_00001 Datasheet

MFR RecommendedRFQ

TPN2R703NL,L1Q

Toshiba Semiconductor and StorageIn Stock: 15947TPN2R703NL,L1Q Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AON6360 is determined by the following critical parameters:

Voltage Rating Compatibility: All substitute parts must maintain the same 30V Vdss rating to ensure safe operation in the target circuit.

Current Handling Capability: Substitute parts must support continuous drain current ratings equal to or greater than the AON6360 specification (36A Ta, 85A Tc) to prevent thermal stress and component failure.

On-Resistance (Rds On): Substitute parts must maintain Rds On values within acceptable limits to preserve circuit efficiency and thermal performance. The AON6360 specifies 3mOhm maximum at 20A, 10V.

Gate Charge and Threshold Voltage: These parameters affect switching speed and gate drive requirements. Substitutes must operate within the ±20V gate voltage range and maintain compatible threshold voltage characteristics.

Package and Thermal Characteristics: Substitute parts must be compatible with the 8-DFN (5x6) footprint or equivalent surface mount packages that maintain thermal performance within the -55°C to 150°C operating range.

Product Status and Compliance: Active product status ensures long-term availability. All substitutes must maintain ROHS3 compliance and equivalent moisture sensitivity ratings.

Parameter Comparison

Engineering Selection Recommendations

AON6354 (Alpha & Omega Semiconductor Inc.)

The AON6354 is the primary manufacturer-recommended substitute. It maintains identical voltage rating (30V Vdss) and package footprint (8-DFN 5x6), enabling direct board-level replacement. Continuous drain current at Tc is 83A, which is within 2% of the AON6360 specification (85A). On-resistance is 3.3mOhm at 10V, representing a 10% increase from the AON6360. The device carries Active product status with ROHS3 compliance and unlimited moisture sensitivity rating, ensuring long-term supply availability and regulatory compliance.

PJQ5424_R2_00001 (Panjit International Inc.)

The PJQ5424_R2_00001 offers the highest continuous drain current at Tc (100A), providing 18% margin above the AON6360 specification. On-resistance is 3.8mOhm at 10V. The package is DFN5060-8, which differs from the 8-DFN (5x6) footprint and requires PCB layout verification. Gate charge is identical at 24nC. The device is Active with ROHS3 compliance. Moisture sensitivity is Not Applicable, indicating different handling requirements during assembly.

TPN2R703NL,L1Q (Toshiba Semiconductor and Storage)

The TPN2R703NL,L1Q provides the lowest on-resistance at 2.7mOhm at 10V, representing a 10% improvement over the AON6360. Continuous drain current at Tc is 45A, which is 47% below the AON6360 specification and does not meet the current handling requirement. Gate charge is 21nC, the lowest among all substitutes. The package is 8-TSON Advance (3.1x3.1), which differs from the 8-DFN (5x6) footprint. The device is Active with RoHS compliance and unlimited moisture sensitivity rating. This part is suitable only for applications with reduced current requirements.

Frequently Asked Questions (FAQ)

Q: Can the AON6354 be used as a direct replacement for the AON6360?

A: Yes. The AON6354 maintains the same 30V voltage rating, 8-DFN (5x6) package footprint, and comparable continuous drain current (83A Tc versus 85A Tc). On-resistance increases by 10% (3.3mOhm versus 3mOhm), which is within acceptable tolerance for most applications. The device is Active with ROHS3 compliance.

Q: What is the primary difference between the AON6354 and PJQ5424_R2_00001?

A: Both devices maintain 30V Vdss and support higher continuous drain current than the AON6360. The AON6354 uses the identical 8-DFN (5x6) package, while the PJQ5424_R2_00001 uses DFN5060-8 packaging, requiring PCB layout verification. The PJQ5424_R2_00001 offers higher current capacity (100A Tc) but has higher on-resistance (3.8mOhm).

Q: Why is the TPN2R703NL,L1Q not recommended as a primary substitute?

A: The TPN2R703NL,L1Q continuous drain current at Tc is 45A, which is 47% below the AON6360 specification of 85A. This device does not meet the current handling requirement. Additionally, the 8-TSON Advance (3.1x3.1) package differs from the 8-DFN (5x6) footprint, requiring PCB redesign.

Q: Are all substitute parts RoHS compliant?

A: Yes. The AON6354 and PJQ5424_R2_00001 are ROHS3 compliant. The TPN2R703NL,L1Q is RoHS compliant. All devices meet regulatory requirements for hazardous substance restrictions.

Q: What is the impact of on-resistance differences on circuit performance?

A: On-resistance directly affects power dissipation and thermal performance. The AON6354 (3.3mOhm) and PJQ5424_R2_00001 (3.8mOhm) show 10% and 27% increases respectively compared to the AON6360 (3mOhm). The TPN2R703NL,L1Q (2.7mOhm) provides 10% improvement. Higher on-resistance increases heat generation; lower on-resistance reduces it. Thermal design must account for these differences.

Q: Can package differences affect circuit board compatibility?

A: Yes. The AON6354 uses the identical 8-DFN (5x6) package and is a direct footprint replacement. The PJQ5424_R2_00001 (DFN5060-8) and TPN2R703NL,L1Q (8-TSON Advance 3.1x3.1) require PCB layout verification and may necessitate design modifications. Consult package datasheets for pin configuration and thermal pad specifications before substitution.

Q: What is the significance of gate charge differences?

A: Gate charge affects switching speed and gate drive circuit requirements. The AON6360 and PJQ5424_R2_00001 both specify 24nC at 10V. The AON6354 specifies 35nC, requiring slightly higher gate drive energy. The TPN2R703NL,L1Q specifies 21nC, the lowest value. Differences within this range are typically accommodated by standard gate drive circuits.

Q: Are moisture sensitivity levels critical for assembly?

A: Yes. The AON6360, AON6354, and TPN2R703NL,L1Q all specify MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The PJQ5424_R2_00001 specifies Not Applicable, indicating different handling protocols. Verify assembly procedures with the component supplier to ensure proper moisture control during manufacturing.