Equivalent & Substitute Parts Reference: AOLD348602DN-A

Part Overview

Manufacturer Part Number AOLD348602DN-A from IDEC is classified as a Pushbutton Switch with a 30mm illuminated actuator. The part status is listed as Obsolete, requiring the identification of alternative or substitute models to ensure continued availability for applications where this specific pushbutton switch is specified.

Substiute Parts

AOLD348602DN-A

IDECIn Stock: 1198AOLD348602DN-A Datasheet

Current PartRFQ

AOLD348602DNUA

IDECIn Stock: 974AOLD348602DNUA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute pushbutton switch selection is strictly governed by identical manufacturer, matching product classification (Pushbutton Switch), RoHS compliance, identical Moisture Sensitivity Level (MSL), and shared ECCN and HTSUS codes. These parameters ensure equivalent regulatory and handling profiles, supporting interchangeability without deviations in compliance or general mechanical packaging. The primary substitution logic is limited to part status, compliance, and matching documentation codes.

Parameter Comparison

Engineering Selection Recommendations

Component selection between IDEC AOLD348602DN-A and AOLD348602DNUA is governed by their conformity to ROHS3 compliance, identical Moisture Sensitivity Level, category and packaging. Both parts reside within the same regulatory classifications ECCN EAR99 and HTSUS 8536.50.9035. With AOLD348602DN-A listed as obsolete, AOLD348602DNUA presents an active status, aligning with ongoing sourcing requirements solely based on compliance and documentation supplied.

Frequently Asked Questions (FAQ)

Q1: What are the primary criteria for substituting pushbutton switches within this reference? A1: Substitution is based on matching manufacturer, category (Pushbutton Switch), RoHS compliance, Moisture Sensitivity Level (MSL), ECCN, HTSUS codes, and packaging.

Q2: Is package format a limiting factor for substitution between AOLD348602DN-A and AOLD348602DNUA? A2: Both parts are supplied in bulk packaging, ensuring direct compatibility based on this criterion.

Q3: Are there specification or compliance differences affecting the use of these substitutes? A3: Both part numbers are RoHS3 compliant and share the same regulatory codes, supporting direct interchange based on supplied parameters.

Q4: Does part status influence engineering selection? A4: Yes. AOLD348602DN-A is obsolete, requiring transition to an active substitute part such as AOLD348602DNUA strictly based on provided compliance and status data.