AOLD212611DN-A Equivalent & Substitute Parts

Part Overview

The AOLD212611DN-A is a 30mm illuminated pushbutton switch manufactured by IDEC, classified as a pushbutton switch component. This part is currently listed as obsolete, which necessitates identification of equivalent substitute components for ongoing applications and new designs. The substitute part maintains functional and mechanical compatibility while offering active product status and continued availability.

Substiute Parts

AOLD212611DN-A

IDECIn Stock: 894AOLD212611DN-A Datasheet

Current PartRFQ

AOLD212611DNUA

IDECIn Stock: 1107AOLD212611DNUA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part AOLD212611DNUA is classified as a direct equivalent based on the following substitution criteria:

• Manufacturer Consistency: Both parts are manufactured by IDEC, ensuring design and quality standards alignment
• Mechanical Compatibility: Both components are 30mm pushbutton switches with identical mounting form factors
• Electrical Specifications: Contact configuration of 1NO1NC (1 Normally Open, 1 Normally Closed) with 120V rated operation
• Compliance Alignment: Both parts maintain ROHS3 compliance and identical MSL rating of 1 (Unlimited)
• Trade Classification: Identical HTSUS code (8536.50.9035) and ECCN classification (EAR99) confirm functional equivalence

The primary distinction is product status: AOLD212611DN-A is obsolete, while AOLD212611DNUA maintains active status with current manufacturing and distribution support.

Parameter Comparison

Engineering Selection Recommendations

Selection between AOLD212611DN-A and AOLD212611DNUA is determined by product availability and lifecycle status:

• AOLD212611DNUA is the designated substitute for new designs and ongoing production requirements. This part maintains active manufacturing status, current inventory availability (1012 pcs), and full ROHS3 compliance certification.

• AOLD212611DN-A is obsolete and should not be selected for new applications. Existing inventory (848 pcs) may be utilized for legacy system maintenance only, provided compliance requirements remain unchanged.

Both parts satisfy identical electrical, mechanical, and regulatory requirements. The substitution is direct with no functional limitations or derating considerations.

Frequently Asked Questions (FAQ)

Q: Can AOLD212611DNUA directly replace AOLD212611DN-A in existing assemblies?

A: Yes. Both parts are 30mm illuminated pushbutton switches with identical contact configurations (1NO1NC), 120V rated operation, and mechanical mounting specifications. No circuit modifications or mechanical redesign is required.

Q: Are there compliance differences between these parts?

A: No. Both parts maintain ROHS3 compliance, identical MSL rating of 1 (Unlimited), and matching ECCN and HTSUS classifications. Regulatory requirements are equivalent.

Q: What is the primary reason to transition from AOLD212611DN-A to AOLD212611DNUA?

A: AOLD212611DN-A is obsolete with no active manufacturing. AOLD212611DNUA is the active equivalent with current production support and inventory availability.

Q: Are packaging differences significant for component selection?

A: Packaging format (standard vs. bulk) affects procurement and logistics but does not impact electrical or mechanical compatibility. Component functionality remains identical regardless of packaging configuration.

Q: Can both parts be used interchangeably in the same bill of materials?

A: AOLD212611DNUA is the recommended part for all new designs and production. AOLD212611DN-A should be reserved for legacy system support only, given its obsolete status.