AOD302N-B Equivalent & Substitute Parts

Part Overview

The AOD302N-B is a 30mm pushbutton switch manufactured by IDEC, classified as an obsolete product. This component is a standard pushbutton switch designed for control applications requiring manual actuation. Due to its obsolete status, identifying equivalent and substitute parts is essential for system maintenance, repair, and component sourcing in legacy equipment applications.

Substiute Parts

AOD302N-B

IDECIn Stock: 1069AOD302N-B Datasheet

Current PartRFQ

AOD302NUB

IDECIn Stock: 1068AOD302NUB Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The AOD302N-B has one direct substitute part identified: AOD302NUB. This substitution is valid based on the following criteria:

• Manufacturer Consistency: Both parts are manufactured by IDEC, ensuring design and quality alignment
• Functional Equivalence: Both are pushbutton switches within the 30mm form factor category
• Compliance Alignment: Both parts maintain ROHS3 compliance and identical MSL ratings (1 - Unlimited)
• Trade Classification: Both share identical ECCN (EAR99) and HTSUS codes (8536.50.9035), confirming regulatory equivalence
• Base Product Series: The AOD302NUB references base product number AOD302, indicating direct lineage from the obsolete AOD302N-B

The AOD302NUB represents the active production equivalent, making it the primary substitute for the obsolete AOD302N-B in new designs and replacement applications.

Parameter Comparison

Engineering Selection Recommendations

For applications currently using the AOD302N-B, the AOD302NUB is the direct substitute. Selection should be based on:

• Product Status Alignment: The AOD302NUB is actively manufactured, ensuring long-term availability and supply chain stability compared to the obsolete AOD302N-B
• Regulatory Compliance: Both parts maintain identical ROHS3 compliance and MSL ratings, confirming suitability for equivalent operating environments
• Certification Equivalence: Matching ECCN and HTSUS classifications confirm regulatory and trade compliance parity
• Mechanical Compatibility: Both parts share the IDEC 30mm pushbutton form factor, supporting direct mechanical integration in existing mounting configurations

Frequently Asked Questions (FAQ)

Q: Can the AOD302NUB directly replace the AOD302N-B in existing equipment?

A: Yes. Both parts are IDEC 30mm pushbutton switches with identical RoHS3 compliance, MSL ratings, and trade classifications. The AOD302NUB is the active production equivalent of the obsolete AOD302N-B.

Q: What is the significance of the "2NC" specification in the AOD302NUB?

A: The 2NC designation indicates the contact configuration: 2 Normally Closed contacts. This electrical specification should be verified against the original AOD302N-B circuit requirements before substitution.

Q: Why is the AOD302N-B listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured by IDEC. The AOD302NUB represents the current production alternative within the same product family.

Q: Are there packaging differences between these parts?

A: The AOD302N-B packaging is not specified in available documentation. The AOD302NUB is supplied in Bulk packaging. Packaging format should be confirmed based on application requirements.

Q: Do both parts meet the same environmental and regulatory standards?

A: Yes. Both parts are ROHS3 compliant with MSL rating 1 (Unlimited), and share identical ECCN (EAR99) and HTSUS (8536.50.9035) classifications.