Request Quote
(Ships tomorrow)
AO3435 P-Channel MOSFET Equivalent & Substitute Parts
Part Overview
The AO3435 is a P-Channel MOSFET manufactured by Alpha & Omega Semiconductor Inc., rated for 20V drain-to-source voltage with 2.9A continuous drain current at 25°C. The device is packaged in SOT-23-3 surface mount configuration and is designed for general-purpose switching applications requiring low on-resistance performance.
The AO3435 carries a product status of "Not For New Designs," indicating that Alpha & Omega Semiconductor Inc. has discontinued this part for new design implementations. Identifying equivalent and substitute parts is necessary to support existing applications, facilitate design transitions, and ensure supply chain continuity for legacy systems.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| FET Type | P-Channel | — |
| Drain-to-Source Voltage (Vdss) | 20 | V |
| Continuous Drain Current (Id) @ 25°C | 2.9 | A |
| On-Resistance (Rds On Max) @ Id, Vgs | 70 mOhm @ 3.5A, 4.5V | — |
| Gate-Source Voltage (Vgs Max) | ±8 | V |
| Power Dissipation (Max) | 1 | W |
| Operating Temperature Range | -55 to 150 | °C |
| Mounting Type | Surface Mount | — |
| Package | SOT-23-3 | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitution of the AO3435 is determined by strict equivalence across the following critical parameters:
Primary Substitution Criteria:
- FET Type: P-Channel (required)
- Drain-to-Source Voltage (Vdss): 20V (required)
- Package: SOT-23-3 surface mount (required)
- Mounting Type: Surface Mount (required)
- Operating Temperature Range: -55°C to 150°C (required)
- RoHS Compliance: ROHS3 Compliant (required)
Secondary Compatibility Parameters:
- Continuous Drain Current (Id): 2.9A minimum at 25°C
- On-Resistance (Rds On): Performance characteristic affecting thermal behavior
- Gate-Source Voltage (Vgs Max): ±8V or greater
- Power Dissipation: 1W or greater
- Moisture Sensitivity Level: MSL 1 (Unlimited)
Substitute parts must satisfy all primary criteria. Secondary parameters define performance equivalence and application suitability. Parts with higher current ratings, lower on-resistance, or greater power dissipation capability are direct substitutes for the AO3435 in existing designs.
Parameter Comparison
| Part Number | Manufacturer | Vdss (V) | Id @ 25°C (A) | Rds On Max (mOhm) | Vgs Max (V) | Power Diss. (W) | Package | Product Status |
|---|---|---|---|---|---|---|---|---|
| AO3435 | Alpha & Omega Semiconductor Inc. | 20 | 2.9 | 70 @ 3.5A, 4.5V | ±8 | 1.0 | SOT-23-3 | Not For New Designs |
| AOSS21115C | Alpha & Omega Semiconductor Inc. | 20 | 4.5 | 40 @ 4.5A, 4.5V | ±8 | 1.3 | SOT-23-3 | Active |
| DMG2301U-7 | Diodes Incorporated | 20 | 2.5 | 130 @ 2.8A, 4.5V | ±8 | 0.8 | SOT-23-3 | Active |
| DMG3413L-7 | Diodes Incorporated | 20 | 3.0 | 95 @ 3A, 4.5V | ±8 | 0.7 | SOT-23-3 | Active |
| DMP2123L-7 | Diodes Incorporated | 20 | 3.0 | 72 @ 3.5A, 4.5V | ±12 | 1.4 | SOT-23-3 | Active |
| DMP2130L-7 | Diodes Incorporated | 20 | 3.0 | 75 @ 3.5A, 4.5V | ±12 | 1.4 | SOT-23-3 | Active |
| DMP2160U-7 | Diodes Incorporated | 20 | 3.2 | 80 @ 1.5A, 4.5V | ±12 | 1.4 | SOT-23-3 | Active |
| FDN340P | UMW | 20 | 2.0 | 70 @ 2A, 4.5V | ±8 | 1.1 | SOT-23-3 | Active |
| NTR4101PT1G | onsemi | 20 | 1.8 | 85 @ 1.6A, 4.5V | ±8 | 0.42 | SOT-23-3 | Active |
| NTR4101PT1H | onsemi | 20 | 1.8 | 85 @ 1.6A, 4.5V | ±8 | 0.42 | SOT-23-3 | Active |
| NTRV4101PT1G | onsemi | 20 | 1.8 | 85 @ 1.6A, 4.5V | ±8 | 0.42 | SOT-23-3 | Active |
Engineering Selection Recommendations
Primary Substitute: AOSS21115C
The AOSS21115C from Alpha & Omega Semiconductor Inc. is the manufacturer-recommended substitute for the AO3435. This part maintains the same 20V Vdss rating and SOT-23-3 package while providing superior electrical performance with 4.5A continuous drain current and 40 mOhm on-resistance. The AOSS21115C carries Active product status and full ROHS3 compliance. This substitute is suitable for direct replacement in existing AO3435 designs without circuit modification.
Secondary Substitutes: Diodes Incorporated Portfolio
The DMG3413L-7, DMP2123L-7, DMP2130L-7, and DMP2160U-7 from Diodes Incorporated are functionally equivalent P-Channel MOSFETs with 20V Vdss rating and SOT-23-3 packaging. All carry Active product status and ROHS3 compliance. These parts provide drain current ratings between 3.0A and 3.2A, matching or exceeding the AO3435 specification. The DMP series devices support extended gate-source voltage ratings of ±12V compared to the AO3435 ±8V specification.
Alternative Substitutes: onsemi and UMW
The NTR4101PT1G, NTR4101PT1H, and NTRV4101PT1G from onsemi provide 20V Vdss in SOT-23-3 packaging with Active product status and ROHS3 compliance. These parts are rated for 1.8A continuous drain current, which is below the AO3435 specification and suitable only for applications with reduced current requirements. The NTRV4101PT1G variant includes AEC-Q101 automotive qualification.
The FDN340P from UMW is a 20V, 2.0A P-Channel MOSFET in SOT-23-3 packaging with Active status and ROHS3 compliance. This part provides performance between the onsemi and Diodes Incorporated options.
Selection Criteria:
- For direct performance upgrade with same manufacturer: Select AOSS21115C
- For equivalent current rating with extended Vgs range: Select DMP2123L-7, DMP2130L-7, or DMP2160U-7
- For matched current rating with lower power dissipation: Select DMG3413L-7
- For automotive-qualified applications: Select NTRV4101PT1G
- For reduced current applications: Select NTR4101PT1G, NTR4101PT1H, or FDN340P
All recommended substitutes maintain ROHS3 compliance, MSL 1 moisture sensitivity rating, and -55°C to 150°C operating temperature range.
Frequently Asked Questions (FAQ)
Q: Can the AOSS21115C directly replace the AO3435 without circuit modification?
A: Yes. The AOSS21115C is the manufacturer-recommended substitute with identical 20V Vdss rating, SOT-23-3 package, and operating temperature range. The higher current rating (4.5A vs. 2.9A) and lower on-resistance (40 mOhm vs. 70 mOhm) provide improved performance without requiring design changes.
Q: What is the difference between DMP2123L-7 and DMP2130L-7?
A: Both parts are rated for 20V, 3.0A in SOT-23-3 packaging with identical electrical specifications. The primary difference is packaging format: DMP2123L-7 is supplied in Cut Tape (CT) & Digi-Reel format, while DMP2130L-7 is supplied in Tape & Reel (TR) format. Electrical performance and compatibility are equivalent.
Q: Are the onsemi NTR4101 variants suitable for the AO3435 application?
A: The NTR4101 variants are suitable only if the application current requirement is 1.8A or less. The AO3435 is rated for 2.9A continuous drain current, which exceeds the NTR4101 specification. Using an undersized device may result in thermal stress and reduced reliability. For applications requiring the full 2.9A rating, select AOSS21115C, DMG3413L-7, DMP2123L-7, DMP2130L-7, or DMP2160U-7.
Q: What does "Not For New Designs" status mean for the AO3435?
A: This status indicates that Alpha & Omega Semiconductor Inc. has discontinued the AO3435 for new design implementations. Existing inventory may remain available, but the manufacturer does not recommend this part for new circuit designs. Substitution with an Active-status part such as AOSS21115C is recommended for long-term supply security.
Q: Can I use a substitute with higher Vgs Max rating in place of the AO3435?
A: Yes, provided the application gate drive circuit does not exceed the AO3435 ±8V specification. Parts with ±12V Vgs Max ratings (DMP2123L-7, DMP2130L-7, DMP2160U-7) are backward-compatible with ±8V gate drive signals. However, if the application requires ±12V gate drive capability, only the DMP series or equivalent ±12V-rated devices should be selected.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All substitute parts listed in this reference carry ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity rating, matching the AO3435 environmental specifications.
Q: What is the significance of on-resistance (Rds On) differences between substitutes?
A: On-resistance directly affects power dissipation and thermal performance. Lower Rds On values reduce heat generation at equivalent current levels. The AOSS21115C (40 mOhm) dissipates less heat than the AO3435 (70 mOhm) at the same current. For thermally constrained applications, lower Rds On substitutes improve reliability and reduce cooling requirements.
Q: Can I substitute the AO3435 with a lower-current part like the NTR4101?
A: Substitution with lower-current parts is not recommended for applications requiring the full 2.9A rating. Using an undersized device creates thermal stress, reduces device lifetime, and may cause circuit malfunction. Lower-current substitutes are suitable only for applications with confirmed current requirements below 1.8A.
Q: What packaging formats are available for substitute parts?
A: Substitute parts are available in two packaging formats: Cut Tape (CT) & Digi-Reel and Tape & Reel (TR). Both formats contain identical devices in SOT-23-3 configuration. Selection between formats depends on assembly process requirements and volume. Verify packaging format compatibility with your procurement and assembly workflow.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts