AO3401AL P-Channel MOSFET 30V 4A SOT-23-3 Equivalent & Substitute Parts

Part Overview

The AO3401AL is a P-Channel Metal Oxide Semiconductor Field Effect Transistor (MOSFET) manufactured by Alpha & Omega Semiconductor Inc., rated for 30V drain-to-source voltage with 4A continuous drain current in a surface mount SOT-23-3 package. The device is classified as obsolete product status. Due to obsolescence, equivalent and substitute parts from active manufacturers are required for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility within the specified parameter ranges while accommodating packaging and thermal performance variations.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	30	V
Current - Continuous Drain (Id) @ 25°C	4	A
Rds On (Max) @ Id, Vgs	50 mOhm @ 4A, 10V	—
Vgs(th) (Max) @ Id	1.3	V @ 250µA
Gate Charge (Qg) (Max) @ Vgs	14	nC @ 10V
Vgs (Max)	±12	V
Input Capacitance (Ciss) (Max) @ Vds	645	pF @ 15V
Power Dissipation (Max)	1.4	W
Operating Temperature	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution compatibility for the AO3401AL is determined by the following critical electrical and mechanical parameters:

Electrical Compatibility Criteria:

Drain to Source Voltage (Vdss) must equal or exceed 30V
Continuous Drain Current (Id) must equal or exceed 4A at 25°C
On-state resistance (Rds On) must not exceed 50 mOhm at rated current and 10V gate-source voltage
Gate threshold voltage (Vgs(th)) must be compatible with 1.3V maximum specification
Maximum gate-source voltage (Vgs) must accommodate ±12V operation
Operating temperature range must include -55°C to 150°C

Mechanical Compatibility Criteria:

Mounting type must be Surface Mount
Package must be SOT-23-3 or equivalent footprint (TO-236-3, SC-59)
Moisture Sensitivity Level must be 1 (Unlimited) or equivalent

Substitution Logic: Substitute parts are grouped into two categories based on package configuration:

Direct SOT-23-3 Substitutes: Parts maintaining the original three-pin SOT-23-3 package with single P-Channel configuration. These provide pin-for-pin compatibility.
Alternative Package Substitutes: Parts with enhanced electrical performance in larger packages (8-SO, 8-SOIC) that exceed the electrical requirements but require PCB layout modification.

Parameter Comparison

Parameter	AO3401AL	AO3401A	DMP3056L-13	DMP3098LSS-13	NTR4171PT1G	PJA3401A_R1_00001	SI2343DS-T1-E3
Manufacturer	Alpha & Omega	UMW	Diodes Inc.	Diodes Inc.	onsemi	Panjit	Vishay
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
Vdss (V)	30	30	30	30	30	30	30
Id @ 25°C (A)	4	4.2	4.3	5.3	2.2	3.6	3.1
Rds On (mOhm) @ Vgs	50 @ 10V	50 @ 10V	50 @ 10V	65 @ 10V	75 @ 10V	54 @ 10V	53 @ 10V
Vgs(th) (V) @ 250µA	1.3	1.3	2.1	2.1	1.4	1.3	3
Qg (nC) @ Vgs	14 @ 10V	9.4 @ 4.5V	11.8 @ 10V	7.8 @ 10V	15.6 @ 10V	19 @ 10V	21 @ 10V
Ciss (pF) @ Vds	645 @ 15V	954 @ 15V	642 @ 25V	336 @ 25V	720 @ 15V	994 @ 15V	540 @ 15V
Power Dissipation (W)	1.4	1.4	1.38	2.5	0.48	1.25	0.75
Operating Temp (°C)	-55 to 150	to 150	-55 to 150	-55 to 150	-55 to 150	-55 to 150	-55 to 150
Package	SOT-23-3	SOT-23	SOT-23-3	8-SO	SOT-23-3	SOT-23	SOT-23-3
RoHS Status	—	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Tier 1 - Direct Electrical and Package Equivalents (Pin-for-Pin Compatible):

AO3401A (UMW) is the primary direct substitute. This part maintains identical Vdss (30V), exceeds the minimum Id requirement (4.2A vs. 4A), and matches the Rds On specification (50 mOhm @ 10V). The SOT-23 package is footprint-compatible with SOT-23-3. Product status is Active with REACH Unaffected compliance. Inventory availability is substantial (220,400 pcs).

PJA3401A_R1_00001 (Panjit International Inc.) provides direct SOT-23 package compatibility with slightly reduced Id rating (3.6A) and lower power dissipation (1.25W). Vgs(th) matches at 1.3V. RoHS3 compliance is confirmed. This option is suitable for applications where the 4A minimum current is not critical.

SI2343DS-T1-E3 (Vishay Siliconix) offers SOT-23-3 package compatibility with reduced Id (3.1A) and power dissipation (750mW). Vgs(th) is elevated at 3V, which may affect gate drive circuit design. RoHS3 compliant. Suitable for lower current applications.

Tier 2 - Higher Performance Alternatives (Requires PCB Layout Modification):

DMP3056L-13 (Diodes Incorporated) maintains SOT-23-3 package compatibility with enhanced Id (4.3A) and identical Rds On (50 mOhm @ 10V). Vgs(th) is elevated to 2.1V. RoHS3 compliant. Active product status with 10,136 pcs inventory.

DMP3098LSS-13 (Diodes Incorporated) provides superior electrical performance in an 8-SO package with Id of 5.3A and power dissipation of 2.5W. Rds On is 65 mOhm @ 10V. This option requires PCB redesign but offers enhanced thermal performance. RoHS3 compliant with 238,693 pcs inventory.

Tier 3 - Current-Limited Alternative:

NTR4171PT1G (onsemi) is a SOT-23-3 package option with reduced Id (2.2A) and power dissipation (480mW). Rds On is 75 mOhm @ 10V. This part is suitable only for applications where continuous drain current does not exceed 2.2A. RoHS3 compliant.

Selection Criteria Summary:

All recommended substitutes maintain 30V Vdss rating
All substitutes are from manufacturers with Active product status
All substitutes carry RoHS3 compliance certification
All substitutes maintain REACH Unaffected status
Package selection depends on PCB layout constraints and thermal requirements
Gate threshold voltage variations (1.3V to 3V) require verification against gate drive circuit specifications

Frequently Asked Questions (FAQ)

Q: Can AO3401A be used as a direct replacement for AO3401AL without PCB modification?

A: Yes. AO3401A maintains identical SOT-23 package footprint compatibility, matching Vdss (30V), Rds On (50 mOhm @ 10V), and Vgs(th) (1.3V). The part exceeds the minimum Id requirement at 4.2A. No PCB layout changes are required.

Q: What is the primary reason for substituting the AO3401AL?

A: The AO3401AL is classified as obsolete product status. Active manufacturer alternatives are required for new production and long-term supply chain continuity.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All recommended substitute parts carry RoHS3 Compliant certification. The original AO3401AL does not specify RoHS status.

Q: Can DMP3098LSS-13 be used in place of AO3401AL?

A: DMP3098LSS-13 is electrically compatible with superior performance (5.3A Id, 2.5W power dissipation) but requires PCB redesign. The part uses an 8-SO package instead of SOT-23-3, necessitating new footprint layout and potentially different thermal management considerations.

Q: What is the significance of Vgs(th) variation among substitute parts?

A: Vgs(th) determines the gate voltage threshold required to turn the device on. Variations from 1.3V to 3V affect gate drive circuit design. Parts with higher Vgs(th) (such as SI2343DS-T1-E3 at 3V) may require different gate driver specifications. Verify gate drive voltage compatibility with your circuit design.

Q: Which substitute part offers the best thermal performance?

A: DMP3098LSS-13 provides the highest power dissipation rating at 2.5W in an 8-SO package, offering superior thermal performance compared to SOT-23-3 alternatives. This option is recommended for applications with elevated ambient temperatures or continuous high-current operation.

Q: Is NTR4171PT1G suitable for all AO3401AL applications?

A: No. NTR4171PT1G has a reduced continuous drain current rating of 2.2A, which is below the AO3401AL specification of 4A. This part is suitable only for applications where the maximum required drain current does not exceed 2.2A.

Q: What packaging options are available for substitutes?

A: Substitute parts are available in two package configurations: SOT-23-3 (pin-for-pin compatible with AO3401AL) and 8-SO (larger package requiring PCB redesign but offering enhanced electrical performance and thermal dissipation).

Q: Are all substitute parts available in high volume?

A: Yes. All recommended substitute parts have confirmed inventory availability ranging from 3,353 pcs (SI2343DS-T1-E3) to 238,693 pcs (DMP3098LSS-13), supporting both prototype and production requirements.

Q: What is the operating temperature range for substitute parts?

A: All substitute parts maintain the full operating temperature range of -55°C to 150°C (TJ), matching the AO3401AL specification.

Q: Do substitute parts maintain the same moisture sensitivity level?

A: Yes. All substitute parts carry Moisture Sensitivity Level (MSL) 1 (Unlimited), matching the AO3401AL specification and eliminating special handling requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message