ANT-DB1-HDP-RPS RF Antenna Equivalent & Substitute Parts

Part Overview

The ANT-DB1-HDP-RPS is a multi-band flat bar RF antenna manufactured by TE Connectivity Linx, designed for wide-band applications across 892MHz, 1.85GHz, and 2.45GHz frequency bands. This active product operates across 824MHz to 2.483GHz with RP-SMA Male termination and adhesive mounting. Substitute parts may be required due to inventory constraints, application-specific frequency requirements, or design modifications necessitating alternative antenna types or performance characteristics.

Substiute Parts

ANT-DB1-HDP-RPS

TE Connectivity LinxIn Stock: 1026ANT-DB1-HDP-RPS Datasheet

Current PartRFQ

FXUB66.01.0150C

Taoglas LimitedIn Stock: 2500FXUB66.01.0150C Datasheet

SimilarRFQ

MA208.A.AB.001

Taoglas LimitedIn Stock: 1136MA208.A.AB.001 Datasheet

SimilarRFQ

TG.30.8112

Taoglas LimitedIn Stock: 1550TG.30.8112 Datasheet

SimilarRFQ

TG.30.8112W

Taoglas LimitedIn Stock: 825TG.30.8112W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Criteria:

• Frequency range overlap with ANT-DB1-HDP-RPS operating bands (824MHz ~ 2.483GHz)
• Compatible termination type (RP-SMA Male or SMA Male)
• Adhesive or connector-based mounting compatibility
• Active product status
• RoHS and REACH compliance alignment

Substitute Parts Classification:

Group 1 - Flat Bar Antenna (MA208.A.AB.001): Maintains flat bar form factor with extended frequency coverage (700MHz ~ 2.17GHz), dual SMA Male termination, and adhesive mounting. Supports overlapping GSM, LTE, and UMTS bands with enhanced gain characteristics.

Group 2 - Wide-Band Patch Antenna (FXUB66.01.0150C): Flat patch form factor with ultra-wide frequency range (700MHz ~ 6GHz) and SMA Male termination. Minimal height profile (0.20mm) suitable for space-constrained applications. Supports cellular, navigation, and WiFi standards.

Group 3 - Whip Straight Antenna (TG.30.8112, TG.30.8112W): Whip straight form factor with frequency coverage spanning 698MHz ~ 2.7GHz. SMA Male connector mount termination. Extended height (148.60mm) for enhanced gain performance. Identical electrical specifications between TG.30.8112 and TG.30.8112W variants.

Parameter Comparison

Engineering Selection Recommendations

MA208.A.AB.001 Selection: Choose this flat bar substitute when maintaining the original form factor is required and extended frequency coverage (700MHz ~ 2.17GHz) is acceptable. This part provides superior gain performance (up to 4.6dBic) and supports additional cellular standards (CDMA, DCS, PCS). Dual SMA Male termination requires adapter consideration for RP-SMA Male applications. ROHS3 compliance exceeds original RoHS requirements.

FXUB66.01.0150C Selection: Select this flat patch antenna for space-constrained designs requiring minimal height (0.20mm). Ultra-wide frequency range (700MHz ~ 6GHz) accommodates future band expansion. Single SMA Male termination simplifies integration. Highest gain specification (6.4dBi) among substitutes. ROHS3 compliance and 5W maximum power rating support high-power applications.

TG.30.8112 / TG.30.8112W Selection: Deploy these whip straight antennas when enhanced gain performance (3dBi) and extended frequency coverage (698MHz ~ 2.7GHz) justify increased height (148.60mm). Connector mount termination eliminates adhesive dependency. IP67 ingress protection exceeds original specifications. Both variants are electrically identical; TG.30.8112W represents alternative packaging. ROHS3 compliance and EAR99 ECCN classification match original part.

All substitute parts maintain active product status and full regulatory compliance (RoHS, REACH, ECCN).

Frequently Asked Questions (FAQ)

Q: Can MA208.A.AB.001 directly replace ANT-DB1-HDP-RPS without modifications?

A: MA208.A.AB.001 provides frequency range compatibility and adhesive mounting. However, termination differs: MA208.A.AB.001 features dual SMA Male connectors while ANT-DB1-HDP-RPS uses RP-SMA Male. An RP-SMA to SMA adapter is required for direct substitution. Verify connector orientation and impedance matching in your application.

Q: What is the primary advantage of FXUB66.01.0150C over the original ANT-DB1-HDP-RPS?

A: FXUB66.01.0150C offers ultra-wide frequency coverage (700MHz ~ 6GHz) in an extremely compact form factor (0.20mm height). This enables single-antenna solutions for multi-standard applications. The 6.4dBi gain specification provides superior performance compared to the original part's variable gain across bands.

Q: Are TG.30.8112 and TG.30.8112W interchangeable?

A: Yes. Both parts are electrically and mechanically identical, differing only in packaging designation. Selection between them depends on procurement and inventory management requirements.

Q: Does mounting type compatibility affect substitution feasibility?

A: Yes. ANT-DB1-HDP-RPS uses adhesive mounting; MA208.A.AB.001 and FXUB66.01.0150C also support adhesive mounting and are directly compatible. TG.30.8112 and TG.30.8112W use connector mount termination, requiring mechanical redesign of the mounting interface.

Q: Which substitute part best matches the original ANT-DB1-HDP-RPS frequency bands?

A: MA208.A.AB.001 provides the closest frequency band alignment, covering 824MHz ~ 960MHz and 1.71GHz ~ 2.17GHz with overlapping GSM and LTE support. TG.30.8112 and TG.30.8112W also cover these ranges with extended upper frequency limits (2.7GHz).

Q: Are all substitute parts RoHS and REACH compliant?

A: Yes. All substitute parts maintain ROHS3 compliance and REACH Unaffected status, meeting or exceeding the original ANT-DB1-HDP-RPS regulatory requirements.