ANT-8/9-VDP-2000-RPS Equivalent & Substitute Parts

Part Overview

The ANT-8/9-VDP-2000-RPS is an RF antenna manufactured by TE Connectivity Linx, designed for ISM, LoRa, Sensor Networks, and SigFox applications. This flat bar antenna operates across multiple frequency bands in the UHF range (863MHz–873MHz and 902MHz–928MHz) with SMA Male termination and adhesive mounting. The product is currently Active and RoHS Compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, ensuring functional interchangeability in system designs.

Substiute Parts

ANT-8/9-VDP-2000-RPS

TE Connectivity LinxIn Stock: 996ANT-8/9-VDP-2000-RPS Datasheet

Current PartRFQ

ANT-8/9-VDP-2000-SMA

TE Connectivity LinxIn Stock: 856ANT-8/9-VDP-2000-SMA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ANT-8/9-VDP-2000-RPS are identified based on strict equivalence of the following critical parameters:

• Frequency Range: 863MHz–873MHz, 902MHz–928MHz
• Antenna Type: Flat Bar
• Gain: 0.6dBi, 0.5dBi
• VSWR: 1.9
• Termination: SMA Male
• Mounting Type: Adhesive
• Power – Max: 10 W
• Ingress Protection: IP67
• Height (Max): 0.264" (6.71mm)
• Product Status: Active
• RoHS Compliance: RoHS Compliant

The ANT-8/9-VDP-2000-SMA meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical performance characteristics, mechanical dimensions, and environmental ratings, making them functionally interchangeable in applications requiring ISM, LoRa, Sensor Networks, or SigFox connectivity.

Parameter Comparison

Engineering Selection Recommendations

Both ANT-8/9-VDP-2000-RPS and ANT-8/9-VDP-2000-SMA are Active products with full RoHS compliance and REACH unaffected status. Selection between these parts should be based on inventory availability and procurement lead times, as all electrical, mechanical, and environmental specifications are identical. Both parts are suitable for direct substitution in applications requiring UHF ISM band operation with adhesive mounting and SMA Male connectivity.

Frequently Asked Questions (FAQ)

Q: Can ANT-8/9-VDP-2000-SMA be used as a direct replacement for ANT-8/9-VDP-2000-RPS?

A: Yes. Both parts are parametric equivalents with identical frequency ranges (863MHz–873MHz, 902MHz–928MHz), gain (0.6dBi, 0.5dBi), VSWR (1.9), termination (SMA Male), mounting type (Adhesive), and environmental ratings (IP67). They are functionally interchangeable.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts carry identical RoHS Compliant status and REACH Unaffected designation. Both are manufactured by TE Connectivity Linx and belong to the VDP series.

Q: What are the key parameters that determine substitutability?

A: Substitutability is determined by matching frequency range, antenna type, gain, VSWR, termination type, mounting method, power rating, ingress protection rating, and physical dimensions. All these parameters are identical between the ANT-8/9-VDP-2000-RPS and ANT-8/9-VDP-2000-SMA.

Q: Can these antennas be used in applications other than ISM, LoRa, Sensor Networks, and SigFox?

A: These antennas are specified for ISM, LoRa, Sensor Networks, and SigFox applications. Use in other applications requires verification against the specified frequency ranges and electrical characteristics.

Q: What is the significance of the 0.264" (6.71mm) height specification?

A: This maximum height specification defines the physical envelope of the antenna and is critical for space-constrained applications. Both substitute parts maintain this identical dimension, ensuring compatibility with existing mechanical designs.