ANL-40 Equivalent & Substitute Parts

Part Overview

The ANL-40 is a 40A 80 VDC fuse strip manufactured by Eaton - Bussmann Electrical Division. This bolt-mount fuse strip is designed for lift truck applications and features fast-blow response with an indicating function. The part is currently active in production with 947 units in stock. Alternative components may be required due to supply constraints, application voltage adjustments, or system redesign requirements.

Substiute Parts

ANL-40

Eaton - Bussmann Electrical DivisionIn Stock: 1047ANL-40 Datasheet

Current PartRFQ

0CNL040.V

Littelfuse Inc.In Stock: 7670CNL040.V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ANL-40 substitute relationship is based on the following critical parameters:

• Current Rating: 40A (exact match required)
• Fuse Type: Fuse Strip (exact match required)
• Mounting Type: Bolt Mount (exact match required)
• Response Time: Fast Blow (exact match required)
• Approval Agency: UR (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute part 0CNL040.V from Littelfuse Inc. meets these core electrical and mechanical criteria. However, the voltage rating differs: the substitute operates at 32 VAC/32 VDC, compared to the ANL-40's 80 VDC rating. This voltage difference restricts substitution to applications where the system voltage does not exceed 32 VDC.

Parameter Comparison

Engineering Selection Recommendations

Both the ANL-40 and 0CNL040.V are active products with UR approval and ROHS3 compliance. Selection between these components depends on system voltage requirements:

• Use ANL-40 for systems operating at voltages up to 80 VDC
• Use 0CNL040.V only for systems operating at voltages not exceeding 32 VDC

The ANL-40 provides higher voltage capability and slightly higher breaking capacity (2.7kA vs. 2.5kA). The 0CNL040.V offers AC voltage rating capability (32 VAC) in addition to DC operation. Both maintain identical current ratings (40A) and fast-blow response characteristics suitable for lift truck applications.

Frequently Asked Questions (FAQ)

Q: Can 0CNL040.V replace ANL-40 in all applications?

A: No. The 0CNL040.V is rated for 32 VDC maximum, while the ANL-40 is rated for 80 VDC. Substitution is only valid for systems operating at 32 VDC or below.

Q: What is the primary difference between these fuse strips?

A: The voltage rating is the primary difference. The ANL-40 supports 80 VDC operation, while the 0CNL040.V supports 32 VAC/32 VDC operation. Both maintain 40A current rating and fast-blow response.

Q: Are the physical packages identical?

A: No. The ANL-40 uses a rectangular blade package, while the 0CNL040.V uses a cylindrical blade terminal package. Mounting type (bolt mount) is identical for both.

Q: Do both parts have the same breaking capacity?

A: No. The ANL-40 has a breaking capacity of 2.7kA at rated voltage, while the 0CNL040.V has 2.5kA at rated voltage.

Q: Are both parts RoHS compliant?

A: Yes. Both ANL-40 and 0CNL040.V are ROHS3 compliant and UR approved.