ANL-300 Equivalent & Substitute Parts Reference

Part Overview

The ANL-300 is a 300A 80 VDC fuse strip with bolt mount configuration, manufactured by Eaton - Bussmann Electrical Division. This fast-blow fuse is designed for lift truck applications and features an indicating mechanism for visual fault detection. The part is currently active in production with ROHS3 compliance and UR approval agency certification.

Substitute parts become necessary when the ANL-300 is unavailable, when system voltage requirements differ from the 80 VDC rating, or when alternative sourcing is required to maintain supply chain continuity. Equivalent alternatives must maintain the 300A current rating and bolt mount configuration while accommodating the specific voltage requirements of the target application.

Substiute Parts

ANL-300

Eaton - Bussmann Electrical DivisionIn Stock: 1142ANL-300 Datasheet

Current PartRFQ

0CNL300.V

Littelfuse Inc.In Stock: 10180CNL300.V Datasheet

SimilarRFQ

157.5701.6301

Littelfuse Inc.In Stock: 807157.5701.6301 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ANL-300 is determined by the following mandatory parameters:

• Current Rating: Must equal 300A
• Fuse Type: Must be Fuse Strip
• Mounting Type: Must be Bolt Mount
• Response Time: Must be Fast Blow
• Applications: Must support Lift Truck use
• Features: Must include Indicating capability
• RoHS Status: Must maintain ROHS3 Compliance

Voltage rating substitution is permitted when the alternative part's DC voltage rating is lower than or equal to the ANL-300's 80 VDC specification, provided the application circuit operates within the substitute part's voltage limits. Breaking capacity and package configuration may vary within acceptable mechanical and electrical tolerances for the bolt mount interface.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain the mandatory 300A current rating, fast-blow response characteristic, bolt mount configuration, and indicating feature required for lift truck applications. All three parts are ROHS3 compliant and carry active product status.

The 0CNL300.V (Littelfuse POWR-GARD® CNL series) is suitable for systems operating at 32 VDC or lower. This part carries UR approval and is appropriate for lower-voltage lift truck electrical systems.

The 157.5701.6301 (Littelfuse series) is suitable for systems operating at 48 VDC or lower. This part carries cURus approval and supports an extended operating temperature range of -40°C to 125°C, making it applicable to lift truck environments with wider thermal requirements.

Selection between substitutes must be based on the actual system voltage requirement. The ANL-300's 80 VDC rating cannot be directly matched by either substitute; therefore, substitution is only valid when the application circuit operates within the lower voltage specifications of the selected alternative.

Frequently Asked Questions (FAQ)

Q: Can the 0CNL300.V replace the ANL-300 in all applications?

A: The 0CNL300.V is a valid substitute only for systems operating at 32 VDC or lower. The ANL-300 is rated for 80 VDC operation. If your lift truck system operates above 32 VDC, the 0CNL300.V is not suitable.

Q: What is the voltage limitation when using the 157.5701.6301 as a substitute?

A: The 157.5701.6301 is rated for 48 VDC maximum. It is suitable for lift truck systems operating at 48 VDC or lower. Systems requiring 80 VDC operation cannot use this substitute.

Q: Do all three parts have the same breaking capacity?

A: No. The ANL-300 has a breaking capacity of 2.7kA at rated voltage, the 0CNL300.V has 2.5kA, and the 157.5701.6301 has 1.8kA. Breaking capacity differences reflect the voltage rating variations and must be considered in circuit protection design.

Q: Are there mechanical compatibility concerns between the ANL-300 and its substitutes?

A: All three parts use bolt mount configuration. However, package geometry differs: the ANL-300 uses a rectangular blade package, the 0CNL300.V uses a cylindrical blade terminal package, and the 157.5701.6301 uses a metal strip package. Physical mounting space and terminal alignment must be verified before installation.

Q: Which substitute has the widest operating temperature range?

A: The 157.5701.6301 supports -40°C to 125°C operation. The ANL-300 and 0CNL300.V do not specify operating temperature ranges in the provided data.

Q: Are all substitutes ROHS3 compliant?

A: Yes. The ANL-300, 0CNL300.V, and 157.5701.6301 are all ROHS3 compliant.