ANCF2-10MMHW Equivalent & Substitute Parts

Part Overview

The ANCF2-10MMHW is a dual-band whip antenna manufactured by Multi-Tech Systems Inc., designed for 850MHz and 1.9GHz applications with 3dBi gain and magnetic mounting. This part is classified as obsolete, making substitute components necessary for ongoing system support and new designs requiring equivalent RF performance in the UHF frequency bands.

Substiute Parts

ANCF2-10MMHW

Multi-Tech Systems Inc.In Stock: 992ANCF2-10MMHW Datasheet

Current PartRFQ

MIKE2A/3M/SMAM/S/S/26

Siretta LtdIn Stock: 1247MIKE2A/3M/SMAM/S/S/26 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the ANCF2-10MMHW is determined by the following critical parameters:

• Frequency Coverage: The substitute must support both 850MHz and 1.9GHz bands
• Antenna Configuration: Whip, straight form factor with magnetic mounting
• Electrical Performance: Gain specification and connector type compatibility
• Physical Dimensions: Maximum height within acceptable tolerance for form factor equivalence

The MIKE2A/3M/SMAM/S/S/26 from Siretta Ltd qualifies as a substitute based on coverage of the required frequency bands (850MHz, 1.9GHz included in its 6-band specification), identical antenna type (whip, straight), magnetic mounting, and compatible connector interface (SMA Male).

Parameter Comparison

Engineering Selection Recommendations

The MIKE2A/3M/SMAM/S/S/26 is suitable for applications requiring ANCF2-10MMHW functionality. The substitute part maintains active product status with ROHS3 compliance and REACH unaffected certification, ensuring long-term availability and regulatory alignment. The SMA Male connector provides a defined interface standard compared to the generic connector specification of the original part. The increased gain (5dBi versus 3dBi) and expanded frequency coverage (6 bands including the required 850MHz and 1.9GHz) offer enhanced performance characteristics. Physical dimensions remain within acceptable tolerance for magnetic mounting applications, with a maximum height difference of 0.244 inches (6.20mm).

Frequently Asked Questions (FAQ)

Q: Can the MIKE2A/3M/SMAM/S/S/26 directly replace the ANCF2-10MMHW?

A: Yes, for applications requiring 850MHz and 1.9GHz operation. Both parts feature identical antenna type (whip, straight), magnetic mounting, and operate within the same UHF frequency groups. The SMA Male connector on the substitute requires verification of compatibility with existing system connectors.

Q: What is the impact of the gain difference (3dBi vs 5dBi)?

A: The MIKE2A/3M/SMAM/S/S/26 provides 2dBi additional gain, resulting in improved signal reception and transmission efficiency. This represents a performance enhancement for the specified frequency bands.

Q: Are there dimensional compatibility concerns?

A: The MIKE2A/3M/SMAM/S/S/26 has a maximum height of 12.244 inches compared to 12.000 inches for the ANCF2-10MMHW. The 0.244-inch difference is minimal and typically accommodated in magnetic mounting applications.

Q: What certifications apply to the substitute part?

A: The MIKE2A/3M/SMAM/S/S/26 is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.

Q: Why does the substitute cover additional frequency bands?

A: The MIKE2A/3M/SMAM/S/S/26 is designed for multi-band cellular applications (GPRS, GSM, UMTS). The additional bands (868MHz, 900MHz, 1.8GHz, 2.1GHz) provide flexibility for expanded system applications while maintaining full coverage of the original 850MHz and 1.9GHz requirements.