AN7707SP Linear Voltage Regulator IC Equivalent & Substitute Parts

Part Overview

The AN7707SP is a linear voltage regulator IC manufactured by Panasonic Electronic Components, classified as a Power Management (PMIC) device. This part delivers a fixed positive 7V output at 1.2A maximum current and is housed in a TO-252-3 (DPAK) surface mount package. The AN7707SP is currently listed as obsolete, making identification of functionally equivalent substitute parts essential for ongoing design support and production continuity.

Substiute Parts

AN7707SP

Panasonic Electronic ComponentsIn Stock: 1126AN7707SP Datasheet

Current PartRFQ

BA06CC0FP-E2

Rohm SemiconductorIn Stock: 3752BA06CC0FP-E2 Datasheet

SimilarRFQ

BA07CC0FP-E2

Rohm SemiconductorIn Stock: 8357BA07CC0FP-E2 Datasheet

SimilarRFQ

BA08CC0FP-E2

Rohm SemiconductorIn Stock: 10296BA08CC0FP-E2 Datasheet

SimilarRFQ

BA60BC0FP-E2

Rohm SemiconductorIn Stock: 3268BA60BC0FP-E2 Datasheet

SimilarRFQ

BA70BC0FP-E2

Rohm SemiconductorIn Stock: 2491BA70BC0FP-E2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AN7707SP are selected based on the following critical parameters that determine functional equivalence:

Primary Selection Criteria:

• Output voltage matching (7V fixed output)
• Output current capability (minimum 1A required; AN7707SP provides 1.2A)
• Package compatibility (TO-252-3 / DPAK surface mount)
• Input voltage range compatibility (minimum 18V max input support)
• Protection features (Over Current, Over Temperature minimum)

Substitute Groups:

Group 1: Direct 7V Output Equivalents

• BA07CC0FP-E2 (Rohm Semiconductor) – Active product status, 1A output, 25V max input
• BA70BC0FP-E2 (Rohm Semiconductor) – Active product status, 1A output, 16V max input

Both parts provide 7V fixed output in TO-252-3 packaging with surface mount configuration. BA07CC0FP-E2 supports higher input voltage (25V vs. 16V) and includes Over Voltage protection. BA70BC0FP-E2 operates at lower quiescent current (0.5 mA vs. 2.5 mA).

Group 2: Alternative Output Voltage Options

• BA06CC0FP-E2 (Rohm Semiconductor) – 6V output, 1A, 25V max input
• BA08CC0FP-E2 (Rohm Semiconductor) – 8V output, 1A, 25V max input
• BA60BC0FP-E2 (Rohm Semiconductor) – 6V output, 1A, 16V max input

These parts are functionally compatible in applications where output voltage tolerance permits operation at 6V or 8V instead of 7V. All maintain TO-252-3 packaging and 1A output current capability.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (7V Output Required):

BA07CC0FP-E2 is the primary substitute for AN7707SP when 7V output is mandatory. This part is active in production, ROHS3 compliant, and supports the full 25V maximum input voltage range. The 1A output current is lower than the original 1.2A specification; applications must confirm that 1A is sufficient for the load. Quiescent current is lower (2.5 mA vs. 5 mA), providing improved efficiency. PSRR performance is reduced (55 dB vs. 67 dB); noise-sensitive applications should evaluate this parameter.

BA70BC0FP-E2 offers an alternative 7V substitute with the lowest quiescent current (0.5 mA) but operates at a reduced maximum input voltage (16V vs. 18V). This part is suitable for applications with input voltages below 16V and where low standby power consumption is critical. Operating temperature range is limited to -40°C to 105°C compared to the original 25°C to 125°C.

For Voltage-Flexible Applications:

BA06CC0FP-E2 and BA60BC0FP-E2 provide 6V output alternatives. BA06CC0FP-E2 supports 25V input and includes Over Voltage protection. BA60BC0FP-E2 operates at 16V maximum input with minimal quiescent current (0.5 mA).

BA08CC0FP-E2 provides 8V output for applications tolerating higher voltage. This part supports 25V input and includes Over Voltage protection.

Compliance Considerations:

All Rohm substitute parts are ROHS3 compliant and REACH unaffected, meeting modern environmental and regulatory requirements. The AN7707SP obsolete status necessitates transition to active production parts for new designs and ongoing supply chain support.

Frequently Asked Questions (FAQ)

Q: Can BA07CC0FP-E2 directly replace AN7707SP in existing designs?

A: BA07CC0FP-E2 is functionally compatible for 7V output applications. The primary design consideration is output current: BA07CC0FP-E2 provides 1A versus AN7707SP's 1.2A. If the application load draws less than 1A, direct substitution is valid. Both parts use identical TO-252-3 packaging and pinout. PSRR performance is reduced (55 dB vs. 67 dB); noise-sensitive circuits should evaluate this specification.

Q: What is the difference between BA07CC0FP-E2 and BA70BC0FP-E2?

A: Both provide 7V output in TO-252-3 packaging. BA07CC0FP-E2 supports 25V maximum input voltage and includes Over Voltage protection, making it suitable for higher input voltage applications. BA70BC0FP-E2 operates at 16V maximum input with significantly lower quiescent current (0.5 mA vs. 2.5 mA), reducing standby power consumption. BA70BC0FP-E2 operating temperature range is limited to -40°C to 105°C.

Q: Can I use a 6V or 8V substitute if 7V is not available?

A: Substitution with alternative output voltages (BA06CC0FP-E2 at 6V or BA08CC0FP-E2 at 8V) is possible only if the application circuit tolerates the voltage deviation. This requires circuit-level analysis to confirm that downstream components and load circuits operate correctly at the alternative voltage. Output voltage tolerance specifications for all connected components must be verified.

Q: Are all substitute parts available in the same package?

A: Yes. All substitute parts listed (BA06CC0FP-E2, BA07CC0FP-E2, BA08CC0FP-E2, BA60BC0FP-E2, BA70BC0FP-E2) are housed in TO-252-3 (DPAK) surface mount packages with identical pinout and footprint compatibility to AN7707SP.

Q: What protection features does each substitute provide?

A: BA07CC0FP-E2 and BA08CC0FP-E2 include Over Current, Over Temperature, and Over Voltage protection. BA06CC0FP-E2 includes Over Current, Over Temperature, and Over Voltage protection. BA60BC0FP-E2 and BA70BC0FP-E2 include Over Current and Over Temperature protection. The original AN7707SP includes Over Current, Over Temperature, and Short Circuit protection. Applications relying on specific protection features should confirm compatibility.

Q: Are these parts RoHS compliant?

A: All Rohm substitute parts (BA06CC0FP-E2, BA07CC0FP-E2, BA08CC0FP-E2, BA60BC0FP-E2, BA70BC0FP-E2) are ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic components.