AMJMAFB-100.0000T3 Equivalent & Substitute Parts

Part Overview

The AMJMAFB-100.0000T3 is a 100 MHz MEMS-based XO (Standard) oscillator manufactured by Abracon LLC. This surface-mount component operates across a supply voltage range of 1.71V to 3.63V and includes standby (power down) functionality. The part is currently in active production status with 1145 units available in new original inventory. Alternative part numbers exist within the same product family to accommodate different packaging and procurement requirements.

Substiute Parts

AMJMAFB-100.0000T3

Abracon LLCIn Stock: 1208AMJMAFB-100.0000T3 Datasheet

Current PartRFQ

AMJMAFB-100.0000T

Abracon LLCIn Stock: 2008AMJMAFB-100.0000T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AMJMAFB-100.0000T3 has one identified parametric equivalent within the AMJM series: AMJMAFB-100.0000T. Both parts share identical electrical and mechanical specifications across all critical parameters that determine functional compatibility:

• Frequency: 100 MHz
• Voltage supply range: 1.71V ~ 3.63V
• Frequency stability: ±25ppm
• Operating temperature range: -40°C ~ 85°C
• Supply current characteristics: 3mA (Typ) active, 80µA (Typ) disabled
• Package form factor: 4-SMD, No Lead
• Physical dimensions: 2.00mm x 1.60mm x 0.89mm (max height)
• Base resonator technology: MEMS

The primary distinction between these parts is packaging configuration: AMJMAFB-100.0000T3 is supplied in standard packaging, while AMJMAFB-100.0000T is supplied in Tape & Reel (TR) format. This difference affects procurement and assembly processes but does not alter electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both AMJMAFB-100.0000T3 and AMJMAFB-100.0000T are active production components from Abracon LLC with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

AMJMAFB-100.0000T3 is appropriate for applications requiring standard packaging format with lower volume requirements or mixed component sourcing.

AMJMAFB-100.0000T in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding optimizes production efficiency.

Both parts maintain full compliance with ROHS3 and REACH regulations, with MSL rating of 1 (Unlimited) indicating no moisture sensitivity constraints during storage or handling. The identical electrical performance across supply voltage, frequency stability, and current consumption ensures direct functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can AMJMAFB-100.0000T be used as a direct replacement for AMJMAFB-100.0000T3?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. The only difference is packaging format (standard versus Tape & Reel). Circuit performance and PCB footprint compatibility are identical.

Q: What is the difference between standard packaging and Tape & Reel (TR) format?

A: Standard packaging is used for lower-volume orders and manual or mixed assembly processes. Tape & Reel format supplies components on continuous reels optimized for automated pick-and-place assembly equipment. The components themselves are electrically and mechanically identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both AMJMAFB-100.0000T3 and AMJMAFB-100.0000T carry identical RoHS3 compliance and REACH Unaffected status. Moisture sensitivity level (MSL 1) is the same for both.

Q: Which part should I select for high-volume production?

A: AMJMAFB-100.0000T (Tape & Reel format) is recommended for high-volume automated assembly. Standard packaging (AMJMAFB-100.0000T3) is more suitable for prototyping, low-volume builds, or mixed component sourcing.

Q: Do these parts have identical PCB footprints?

A: Yes. Both parts use the same 4-SMD, No Lead package with identical dimensions (2.00mm x 1.60mm) and maximum seated height (0.89mm). PCB layout and reflow profiles are interchangeable.

Q: What is the frequency stability specification, and does it apply to both parts?

A: Both parts maintain ±25ppm frequency stability across the operating temperature range of -40°C to 85°C. This specification is identical for AMJMAFB-100.0000T3 and AMJMAFB-100.0000T.