AMC60MSST Equivalent & Substitute Parts

Part Overview

The AMC60MSST is a 120-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The part features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C.

The AMC60MSST is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure procurement availability, and support ongoing system maintenance and production requirements.

Substiute Parts

AMC60MSST

Sullins Connector SolutionsIn Stock: 855AMC60MSST Datasheet

Current PartRFQ

RMC60MSST

Sullins Connector SolutionsIn Stock: 896RMC60MSST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC60MSST is evaluated based on the following critical parameters that define functional equivalence for card edge connector applications:

Primary Substitution Criteria:

• Manufacturer: Sullins Connector Solutions
• Category: Card Edge Connectors
• Number of Positions: 120
• Number of Rows: 2
• Pitch: 0.100" (2.54mm)
• Gender: Male
• Card Type: Fits Female Edgecards
• Read Out: Dual
• Contact Material: Beryllium Copper
• Contact Finish: Gold
• Operating Temperature Range: -65°C ~ 200°C
• Insulation Material: Polyphenylene Sulfide (PPS)
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected

The RMC60MSST is identified as a substitute part from the same manufacturer. Substitution eligibility is determined by alignment with the above parameters where data is provided for the candidate part.

Parameter Comparison

Engineering Selection Recommendations

The RMC60MSST is an active product offering from Sullins Connector Solutions and serves as a substitute for the obsolete AMC60MSST. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current and future applications.

The transition from AMC60MSST to RMC60MSST is supported by:

• Continued availability through the active product status of the RMC60MSST
• Maintained regulatory compliance across both ROHS3 and REACH requirements
• Identical moisture sensitivity classification (MSL 1 - Unlimited)
• Same manufacturer source, ensuring design continuity and supply chain consistency

The RMC60MSST carries an ECCN classification of EAR99, indicating standard commercial export status, compared to the obsolete classification of the original part.

Frequently Asked Questions (FAQ)

Q: Why is the AMC60MSST classified as obsolete?

A: The AMC60MSST has reached end-of-life status with the manufacturer. The RMC60MSST is the active product offering that provides equivalent functionality for new designs and ongoing production requirements.

Q: Are the AMC60MSST and RMC60MSST directly interchangeable?

A: Both parts are manufactured by Sullins Connector Solutions and are card edge connectors in the same product family. Compatibility is determined by matching the connector specifications to your application requirements, including position count, pitch, gender, and card type interface.

Q: What is the significance of the RoHS3 compliance status?

A: ROHS3 compliance indicates that both the AMC60MSST and RMC60MSST meet the Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials in electrical and electronic equipment. This compliance is maintained across both parts.

Q: Does the REACH unaffected status apply to both parts?

A: Yes. Both the AMC60MSST and RMC60MSST carry REACH unaffected status, indicating that neither part contains substances of very high concern (SVHC) listed under the REACH regulation.

Q: What does MSL 1 (Unlimited) mean for these connectors?

A: Moisture Sensitivity Level 1 (Unlimited) indicates that these connectors have no moisture sensitivity restrictions. They can be stored and handled without special moisture control measures, simplifying logistics and inventory management.

Q: How should I proceed with design updates?

A: For new designs or production transitions, specify the RMC60MSST as the active equivalent. Verify that the connector specifications align with your application requirements, including the 120-position, 2-row configuration, 0.100" pitch, and male gender for female edgecard interface.