AMC35MSST Card Edge Connector Equivalent & Substitute Parts

Part Overview

The AMC35MSST is a 70-position male card edge connector manufactured by Sullins Connector Solutions, designed to interface with female edgecards at 0.100" (2.54mm) pitch. This connector features dual read-out configuration with beryllium copper contacts finished in gold. The part is classified as obsolete, necessitating identification of active substitute components to maintain design continuity and ensure procurement availability for new production and field service applications.

Substiute Parts

AMC35MSST

Sullins Connector SolutionsIn Stock: 1158AMC35MSST Datasheet

Current PartRFQ

RMC35MSST

Sullins Connector SolutionsIn Stock: 911RMC35MSST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC35MSST is determined by alignment of the following critical parameters:

Primary Substitution Criteria:

• Connector category: Card Edge Connectors
• Position count: 70 positions
• Row configuration: 2 rows
• Pitch specification: 0.100" (2.54mm)
• Manufacturer: Sullins Connector Solutions
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected, MSL 1

The RMC35MSST is identified as a direct manufacturer substitute, sharing the same base product number family (RMC35 vs. AMC35) and manufactured by Sullins Connector Solutions. Both components maintain ROHS3 compliance and MSL 1 classification. The substitute part transitions from obsolete to active product status, ensuring continued availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

The RMC35MSST is the direct substitute for the obsolete AMC35MSST. Both components are manufactured by Sullins Connector Solutions and share identical position count, row configuration, and pitch specifications. The substitute part maintains full ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements equivalent to the original component.

Selection of the RMC35MSST is supported by:

• Active product status ensuring procurement availability and supply chain continuity
• Identical connector geometry and electrical interface specifications
• Equivalent regulatory compliance certifications
• Maintained MSL 1 classification for unlimited shelf life storage
• Same manufacturer lineage within the Sullins product family

The transition from AMC35MSST to RMC35MSST does not introduce regulatory or compliance barriers for applications requiring ROHS3 and REACH compliance.

Frequently Asked Questions (FAQ)

Q: Why is the AMC35MSST classified as obsolete?

A: The AMC35MSST has reached end-of-life status within Sullins Connector Solutions' product portfolio. The RMC35MSST represents the active successor component within the same manufacturer family.

Q: Are the AMC35MSST and RMC35MSST electrically equivalent?

A: Both components share identical position count (70), row configuration (2), and pitch specification (0.100" / 2.54mm). These parameters define the electrical interface for card edge connector applications.

Q: What is the difference between the AMC35 and RMC35 base product numbers?

A: The base product numbers indicate different product lines within Sullins Connector Solutions. The RMC35 series represents the active product line, while AMC35 is obsolete. The MSST suffix denotes the specific connector configuration in both cases.

Q: Does the RMC35MSST meet the same regulatory requirements as the AMC35MSST?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and classified as MSL 1 (unlimited moisture sensitivity level). Regulatory compliance is maintained in the substitution.

Q: Can I use existing inventory of AMC35MSST components in new designs?

A: Existing AMC35MSST inventory may be used for current applications. However, new designs should specify the RMC35MSST to ensure long-term supply availability and alignment with active product lines.

Q: What is the current inventory status of the RMC35MSST?

A: The RMC35MSST is available with 811 pieces in new original stock, providing immediate procurement availability for production requirements.

Q: Are there any mechanical differences between the AMC35MSST and RMC35MSST?

A: Both components are 70-position, 2-row card edge connectors with 0.100" pitch. Mechanical compatibility is maintained for applications designed for the original AMC35MSST specification.