AMC34MWST Equivalent & Substitute Parts

Part Overview

The AMC34MWST is a 68-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The connector features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C.

The AMC34MWST is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and field service requirements for systems utilizing this connector type.

Substiute Parts

AMC34MWST

Sullins Connector SolutionsIn Stock: 799AMC34MWST Datasheet

Current PartRFQ

RMC34MWST

Sullins Connector SolutionsIn Stock: 1230RMC34MWST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC34MWST is determined by alignment of the following critical parameters:

Primary Substitution Criteria:

• Manufacturer: Sullins Connector Solutions
• Category: Card Edge Connectors
• Base Product Number alignment (AMC34 series)
• RoHS3 Compliance
• MSL Rating: 1 (Unlimited)
• REACH Status: REACH Unaffected

The RMC34MWST is identified as a direct manufacturer substitute. Both parts share the same manufacturer, product category, and base product number designation. Both parts maintain identical regulatory compliance status (ROHS3 Compliant, REACH Unaffected, MSL 1). The substitute part is currently in active production status, providing supply continuity for the obsolete AMC34MWST.

Parameter Comparison

Engineering Selection Recommendations

The RMC34MWST is the direct substitute for the obsolete AMC34MWST. Both parts are manufactured by Sullins Connector Solutions and maintain identical regulatory compliance certifications. The substitute part holds active product status, ensuring ongoing availability and manufacturing support.

Selection of the RMC34MWST for applications previously utilizing the AMC34MWST is supported by:

• Identical manufacturer source
• Matching RoHS3 compliance certification
• Matching MSL rating (1 - Unlimited)
• Matching REACH compliance status
• Active production status providing supply continuity

The transition from the obsolete AMC34MWST to the active RMC34MWST maintains regulatory and environmental compliance requirements for new production and field service applications.

Frequently Asked Questions (FAQ)

Q: Why is the AMC34MWST classified as obsolete?

A: The AMC34MWST has been discontinued by the manufacturer. The RMC34MWST serves as the active production equivalent from Sullins Connector Solutions.

Q: Are the AMC34MWST and RMC34MWST interchangeable?

A: Both parts are manufactured by Sullins Connector Solutions and share the same base product number series (AMC34 and RMC34 respectively). They maintain identical regulatory compliance status. Mechanical and electrical compatibility should be verified against specific application requirements and connector interface specifications.

Q: What is the significance of the MSL rating of 1?

A: MSL 1 indicates unlimited moisture sensitivity level, meaning the component has no moisture sensitivity restrictions and does not require special handling or storage conditions related to moisture exposure.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the AMC34MWST and RMC34MWST are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What is the difference between the AMC34 and RMC34 base product numbers?

A: The base product numbers indicate different product lines within the Sullins card edge connector portfolio. The RMC34 represents the active production line that supersedes the obsolete AMC34 line.

Q: Is inventory availability a factor in part selection?

A: The AMC34MWST has 770 pieces in stock as new original inventory. The RMC34MWST has 1129 pieces in stock. For new designs and ongoing production, the RMC34MWST is recommended due to its active product status and continued manufacturing support.