AMC21MWST Equivalent & Substitute Parts

Part Overview

The AMC21MWST is a 42-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The part features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C.

The AMC21MWST is classified as obsolete. Locating equivalent or substitute components is necessary to support ongoing maintenance, repair, and replacement requirements for systems utilizing this connector type.

Substiute Parts

AMC21MWST

Sullins Connector SolutionsIn Stock: 1128AMC21MWST Datasheet

Current PartRFQ

RMC21MWST

Sullins Connector SolutionsIn Stock: 1206RMC21MWST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC21MWST is based on maintaining compatibility within the Sullins Connector Solutions card edge connector family. The primary substitute identified is the RMC21MWST, which shares the same base product number designation (RMC21 vs. AMC21) and is manufactured by the same supplier.

The substitution logic is established through the following criteria:

• Manufacturer Consistency: Both parts are manufactured by Sullins Connector Solutions, ensuring design and quality standards alignment
• Connector Category: Both are classified as card edge connectors
• Base Product Family: The RMC21 designation indicates membership in the same connector family as the AMC21
• Compliance Certifications: Both parts maintain ROHS3 compliance and REACH unaffected status
• Moisture Sensitivity: Both parts share MSL 1 (Unlimited) classification

The RMC21MWST is classified as active product status, providing ongoing availability and support compared to the obsolete AMC21MWST.

Parameter Comparison

Engineering Selection Recommendations

The RMC21MWST is identified as the direct substitute for the obsolete AMC21MWST based on manufacturer continuity and regulatory compliance alignment. Both parts maintain identical RoHS3 compliance status and MSL 1 classification, ensuring compatibility with existing supply chain and quality management requirements.

The transition from AMC21MWST to RMC21MWST is supported by active product status of the substitute part, providing assured long-term availability and manufacturing support. Both parts are manufactured by Sullins Connector Solutions, maintaining design consistency and connector family standards.

Selection of the RMC21MWST as a replacement for the obsolete AMC21MWST is appropriate for applications requiring card edge connector functionality within the Sullins product ecosystem.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the AMC21MWST?

A: The AMC21MWST is classified as obsolete. The RMC21MWST provides an active product alternative from the same manufacturer, ensuring continued availability and support.

Q: Are both connectors manufactured by the same company?

A: Yes. Both the AMC21MWST and RMC21MWST are manufactured by Sullins Connector Solutions.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and share MSL 1 (Unlimited) classification.

Q: What is the significance of the base product number designation?

A: The base product numbers (AMC21 and RMC21) indicate membership within the same connector family from Sullins Connector Solutions, establishing design and functional relationships between parts.

Q: Is the RMC21MWST currently available?

A: Yes. The RMC21MWST is classified as active product status, indicating current manufacturing and availability.

Q: What parameters are shared between these two connectors?

A: Both parts share manufacturer identity, card edge connector category classification, ROHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity level.