AMC13MWST Equivalent & Substitute Parts

Part Overview

The AMC13MWST is a 26-position male card edge connector manufactured by Sullins Connector Solutions. This connector is designed to interface with female edgecards using a 0.100" (2.54mm) pitch configuration with dual read-out capability. The part features beryllium copper contacts with gold plating and operates across a temperature range of -65°C to 200°C.

The AMC13MWST is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and maintenance requirements for systems utilizing this connector type.

Substiute Parts

AMC13MWST

Sullins Connector SolutionsIn Stock: 1227AMC13MWST Datasheet

Current PartRFQ

RMC13MWST

Sullins Connector SolutionsIn Stock: 1017RMC13MWST Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AMC13MWST is determined by alignment of the following critical parameters:

Primary Substitution Criteria:

• Manufacturer: Sullins Connector Solutions
• Category: Card Edge Connectors
• Number of Positions: 26
• Number of Rows: 2
• Pitch: 0.100" (2.54mm)
• Gender: Male
• Contact Material: Beryllium Copper
• Contact Finish: Gold
• Operating Temperature Range: -65°C ~ 200°C
• Material - Insulation: Polyphenylene Sulfide (PPS)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The RMC13MWST is identified as a direct substitute based on manufacturer continuity within the Sullins Connector Solutions product line and shared compliance certifications. The substitute part maintains active product status, ensuring ongoing availability and support.

Parameter Comparison

Engineering Selection Recommendations

The RMC13MWST is the appropriate substitute for the obsolete AMC13MWST. Both parts are manufactured by Sullins Connector Solutions and maintain identical RoHS3 compliance and REACH unaffected status. The substitute part carries active product status, providing assured supply chain continuity and manufacturer support.

Selection of the RMC13MWST eliminates obsolescence risk while maintaining compliance with regulatory requirements applicable to the original part specification. The active status of the substitute part ensures availability for current production, repair, and maintenance operations.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the AMC13MWST?

A: The AMC13MWST is classified as obsolete. The RMC13MWST provides an active alternative from the same manufacturer, ensuring continued availability and supply chain reliability.

Q: Are the AMC13MWST and RMC13MWST mechanically compatible?

A: Both parts are 26-position male card edge connectors manufactured by Sullins Connector Solutions with 0.100" (2.54mm) pitch configuration. Mechanical compatibility is established through shared connector category classification and identical position/row configuration.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the AMC13MWST and RMC13MWST are ROHS3 compliant, REACH unaffected, and carry Moisture Sensitivity Level 1 (Unlimited) classification.

Q: What is the operational temperature range for the substitute part?

A: The AMC13MWST operates across -65°C to 200°C. Specific operational temperature data for the RMC13MWST is not provided in the available technical parameters.

Q: Is the substitute part available in stock?

A: The RMC13MWST is available with 938 pieces in new original stock inventory.

Q: Can the AMC13MWST and RMC13MWST be used interchangeably in existing designs?

A: Both parts share the same manufacturer, connector category, position count, row configuration, and pitch specification. Interchangeability is established through these aligned parameters. Design validation should confirm compatibility with specific application requirements.