AMC06MMSD Card Edge Connector Equivalent & Substitute Parts

Part Overview

The AMC06MMSD is a 12-position male card edge connector manufactured by Sullins Connector Solutions, designed to interface with female edgecards at 0.100" (2.54mm) pitch. This connector features dual read-out configuration with gold-plated beryllium copper contacts and operates across -65°C to 200°C. The AMC06MMSD is classified as obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure ongoing component availability for new production and field service applications.

Substiute Parts

AMC06MMSD

Sullins Connector SolutionsIn Stock: 1049AMC06MMSD Datasheet

Current PartRFQ

RMC06MMSD

Sullins Connector SolutionsIn Stock: 647RMC06MMSD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete AMC06MMSD with the active RMC06MMSD is based on alignment of the following critical parameters:

Matching Parameters:

• Connector type and gender (Card Edge, Male)
• Number of positions (12)
• Pitch specification (0.100" / 2.54mm)
• Read-out configuration (Dual)
• Contact finish type and thickness (Gold, 30.0µin)
• Operating temperature range (-65°C ~ 200°C)
• Insulation material (Polyphenylene Sulfide)
• Termination method (Solder)
• Compliance certifications (ROHS3, MSL 1)

Differing Parameters:

• Contact material (Beryllium Copper vs. Phosphor Bronze)
• Flange opening orientation (Side Opening vs. Top Opening)
• Card thickness specification (Not specified vs. 0.062")
• Mounting type (Not specified vs. Through Hole)
• Color (Not specified vs. Black)
• Product status (Obsolete vs. Active)

The RMC06MMSD maintains functional and electrical compatibility through identical pitch, position count, contact finish, and operating parameters while providing active product status and current manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The RMC06MMSD serves as the direct active equivalent for the obsolete AMC06MMSD. Both connectors maintain identical electrical and mechanical specifications across all critical parameters including pitch, position count, contact finish, and operating temperature range. Both parts satisfy ROHS3 compliance and REACH requirements, ensuring regulatory alignment for current manufacturing standards.

The transition from AMC06MMSD to RMC06MMSD is supported by:

• Identical connector geometry and electrical interface specifications
• Matching contact finish type and thickness for signal integrity
• Equivalent thermal operating range for application compatibility
• Current manufacturing status and supply chain availability for the RMC06MMSD
• Consistent compliance certifications across both parts

Selection of the RMC06MMSD eliminates obsolescence risk while maintaining full functional compatibility with existing female edgecard interfaces designed for 0.100" pitch, 12-position male connectors.

Frequently Asked Questions (FAQ)

Q: Can the RMC06MMSD directly replace the AMC06MMSD in existing designs?

A: Yes. The RMC06MMSD maintains identical pitch (0.100"), position count (12), contact finish (Gold, 30.0µin), and operating temperature range (-65°C ~ 200°C). Both connectors interface with female edgecards using dual read-out configuration and solder termination.

Q: What is the primary difference between these two connectors?

A: The AMC06MMSD is obsolete while the RMC06MMSD is active. Secondary differences include contact material (Beryllium Copper vs. Phosphor Bronze), flange opening orientation (Side Opening vs. Top Opening), and specified card thickness (0.062" for RMC06MMSD). These differences do not affect electrical or functional compatibility.

Q: Are both connectors RoHS compliant?

A: Yes. Both the AMC06MMSD and RMC06MMSD are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing.

Q: What is the moisture sensitivity level for these connectors?

A: Both connectors carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Does the contact material difference affect performance?

A: Both Beryllium Copper and Phosphor Bronze contacts with identical gold finish thickness (30.0µin) provide equivalent electrical performance for card edge connector applications. The contact material difference does not impact signal integrity or contact resistance within the specified operating parameters.

Q: Can the RMC06MMSD accommodate the same card thickness as the AMC06MMSD?

A: The RMC06MMSD is specified for 0.062" (1.57mm) card thickness. The AMC06MMSD does not specify card thickness in the provided parameters. Verify card thickness compatibility with your specific application requirements.

Q: Are both connectors suitable for through-hole mounting?

A: The RMC06MMSD specifies Through Hole mounting type. The AMC06MMSD does not specify mounting type in the provided parameters. Both connectors use solder termination for PCB attachment.