AM50025D53-A Equivalent & Substitute Parts

Part Overview

The AM50025D53-A is a SPST-NC (Single Pole Single Throw - Normally Closed) chassis mount switch manufactured by Panasonic Electric Works. This switch is rated for 100mA at 125V AC and 30V DC, featuring a lever roller actuator with quick connect termination. The product is currently obsolete, making identification of equivalent substitute parts essential for system maintenance, repair, and component sourcing.

Substiute Parts

AM50025D53-A

Panasonic Electric WorksIn Stock: 902AM50025D53-A Datasheet

Current PartRFQ

V7-6B39D8-348-1

Honeywell Sensing and Productivity SolutionsIn Stock: 831V7-6B39D8-348-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AM50025D53-A is determined by the following critical parameters:

• Circuit Configuration: SPST-NC topology for normally closed operation
• Current Rating: 100mA minimum capacity (AC/DC rated)
• Voltage Rating: 125V AC and 30V DC minimum ratings
• Actuator Type: Lever roller mechanism for mechanical actuation
• Mounting Type: Chassis mount configuration
• Termination Style: Quick connect 0.250" (6.3mm) terminals
• Operating Temperature Range: -25°C to 105°C operational envelope
• Reliability Metrics: Electrical life of 100,000 cycles and mechanical life of 10,000,000 cycles

The substitute part V7-6B39D8-348-1 from Honeywell Sensing and Productivity Solutions shares the same HTSUS classification (8536.50.7000) and ECCN designation (EAR99), indicating functional equivalence within the switch component category. Both parts maintain MSL 1 rating for moisture sensitivity.

Parameter Comparison

Engineering Selection Recommendations

The V7-6B39D8-348-1 represents an active product alternative to the obsolete AM50025D53-A. Selection of this substitute is supported by:

• Product Status Alignment: The Honeywell part maintains active manufacturing status, ensuring continued availability and supply chain reliability
• Regulatory Compliance: Both parts share identical ECCN (EAR99) and HTSUS (8536.50.7000) classifications, confirming equivalent regulatory treatment
• Environmental Compliance: The Honeywell substitute carries RoHS Compliant certification, meeting modern environmental standards
• Moisture Sensitivity: Both components maintain MSL 1 rating, indicating no moisture sensitivity constraints for storage and handling

Component selection should be based on specific application requirements regarding current capacity, voltage ratings, and mechanical specifications as defined in the system design documentation.

Frequently Asked Questions (FAQ)

Q: What makes V7-6B39D8-348-1 a suitable substitute for AM50025D53-A?

A: Both parts are classified under the same HTSUS code (8536.50.7000) and ECCN designation (EAR99), indicating functional equivalence as switch components. The Honeywell part maintains active product status, providing supply continuity for the obsolete Panasonic model.

Q: Are there electrical parameter differences between these parts?

A: The provided data indicates the Honeywell part carries an 11A rating in its description, while the Panasonic original is rated at 100mA. Detailed electrical specifications for the Honeywell part were not provided in the source data. Verification of electrical compatibility with specific application requirements is necessary before implementation.

Q: What is the significance of MSL 1 rating for both parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life with no moisture sensitivity constraints. Both components can be stored and handled under standard industrial conditions without special moisture control measures.

Q: Does the Honeywell part carry any additional certifications?

A: The V7-6B39D8-348-1 is RoHS Compliant, meeting European environmental directives for hazardous substance restrictions. This certification was not specified for the original Panasonic part.

Q: What packaging format is available for the substitute part?

A: The V7-6B39D8-348-1 is supplied in Bulk packaging, differing from the original part's packaging specification. Confirm packaging requirements align with procurement and assembly processes.