AM50013C33-A Equivalent & Substitute Parts

Part Overview

The AM50013C33-A is a snap-action SPDT switch manufactured by Panasonic Electric Works, designed for chassis mount applications with 0.1A capacity at 125V AC. This component operates with a straight lever actuator and quick-connect termination, suitable for low-current switching applications requiring reliable mechanical and electrical performance.

The AM50013C33-A is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this component.

Key Parameters

Parameter	Value
Manufacturer Part Number	AM50013C33-A
Manufacturer	Panasonic Electric Works
Circuit Configuration	SPDT
Switch Function	On-Momentary
Current Rating (AC/DC)	100mA AC/DC
Voltage Rating - AC	125V
Voltage Rating - DC	30V
Actuator Type	Lever, Straight
Mounting Type	Chassis Mount
Termination Style	Quick Connect - 0.187" (4.7mm)
Operating Temperature Range	-25°C to 105°C
Electrical Life	100,000 Cycles
Mechanical Life	10,000,000 Cycles
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the AM50013C33-A is determined by the following critical parameters:

Primary Compatibility Criteria:

Circuit configuration (SPDT required)
Switch function (On-Momentary operation)
Mounting type (Chassis Mount)
Termination style (Quick Connect - 0.187" / 4.7mm)
Actuator type (Lever, Straight)

Electrical Compatibility Criteria:

AC voltage rating must meet or exceed 125V
DC voltage rating must meet or exceed 30V
Current rating must support 100mA minimum at rated voltage

Mechanical Compatibility Criteria:

Operating position approximately 0.602" (15.3mm)
Operating temperature range must encompass -25°C to 105°C or provide suitable overlap

Substitute parts are grouped into two categories: direct electrical equivalents with identical termination and voltage specifications, and higher-capacity alternatives suitable for applications where the original part's current or voltage ratings are insufficient.

Parameter Comparison

Part Number	Manufacturer	Circuit	Current Rating (AC)	Voltage - AC	Voltage - DC	Actuator	Termination	Operating Temp	Electrical Life	Status
AM50013C33-A	Panasonic Electric Works	SPDT	100mA	125V	30V	Lever, Straight	QC 0.187"	-25°C to 105°C	100,000	Obsolete
D413-R1LD-G2	ZF Electronics	SPDT	100mA	250V	30V	Lever, Straight	QC 0.187"	-40°C to 85°C	50,000	Active
V7-1B17D8-048	Honeywell Sensing and Productivity Solutions	SPDT	11A	125V	125V	Lever, Straight	QC 0.187"	-40°C to 85°C	100,000	Active
V7-2B17D8-048	Honeywell Sensing and Productivity Solutions	SPDT	11A	125V	125V	Lever, Straight	QC 0.187"	-40°C to 85°C	100,000	Active
LS0851503F040C1A	E-Switch	SPDT	15A	125V	—	Lever, Straight	QC 0.187"	-25°C to 85°C	50,000	Active
LS0851503F060C1A	E-Switch	SPDT	15A	125V	—	Lever, Straight	QC 0.187"	-25°C to 85°C	50,000	Active
V15T16-CZ100A03-K	Honeywell Sensing and Productivity Solutions	SPDT	16A	250V	—	Lever, Straight	QC 0.250"	-25°C to 125°C	50,000	Active
V15T16-CZ300A03-K	Honeywell Sensing and Productivity Solutions	SPDT	16A	250V	—	Lever, Straight	QC 0.250"	-25°C to 125°C	50,000	Active

Engineering Selection Recommendations

Direct Substitutes (Identical Termination - 0.187" Quick Connect):

D413-R1LD-G2 (ZF Electronics) provides electrical equivalence with enhanced voltage rating (250V AC vs. 125V AC). This part maintains the same current capacity, termination style, and mounting configuration. The reduced operating temperature upper limit (-40°C to 85°C vs. -25°C to 105°C) and lower electrical life (50,000 vs. 100,000 cycles) require verification against application requirements. Product status is Active with RoHS3 compliance.

V7-1B17D8-048 and V7-2B17D8-048 (Honeywell) are higher-capacity alternatives rated for 11A AC at 125V with improved DC voltage rating (125V vs. 30V). Both maintain identical termination and mounting specifications. Operating temperature range is -40°C to 85°C. Both parts carry RoHS compliance and Active product status. V7-1B17D8-048 has 100,000 electrical cycles; V7-2B17D8-048 also has 100,000 cycles. These parts are suitable where increased current capacity is beneficial.

LS0851503F040C1A and LS0851503F060C1A (E-Switch) offer 15A AC capacity at 125V with identical termination. Operating temperature range is -25°C to 85°C with 50,000 electrical cycles. Both carry RoHS3 compliance and Active status. These parts support higher current applications while maintaining the original voltage specification.

Higher-Capacity Alternatives (0.250" Quick Connect Termination):

V15T16-CZ100A03-K and V15T16-CZ300A03-K (Honeywell) provide 16A AC at 250V with 0.250" termination. Operating temperature extends to 125°C. These parts require mechanical redesign to accommodate the larger termination connector. Both carry RoHS compliance and Active status with 50,000 electrical cycles.

Compliance Status:

All recommended active substitutes comply with RoHS requirements. The original AM50013C33-A (Obsolete) should be replaced with active-status alternatives to ensure long-term supply chain viability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can D413-R1LD-G2 directly replace AM50013C33-A without circuit modification?

A: D413-R1LD-G2 maintains identical circuit configuration (SPDT), switch function (On-Momentary), mounting type (Chassis Mount), and termination style (Quick Connect 0.187"). Electrical compatibility is confirmed for 100mA operation at 125V AC. The higher voltage rating (250V AC) provides additional margin. Verification of the reduced operating temperature upper limit (85°C vs. 105°C) and electrical life (50,000 vs. 100,000 cycles) against application requirements is necessary.

Q: What is the difference between V7-1B17D8-048 and V7-2B17D8-048?

A: Both parts share identical electrical ratings (11A AC, 125V AC, 125V DC), circuit configuration, termination, and mechanical life. The primary difference is operating force: V7-1B17D8-048 requires 50gf with 4gf release force, while V7-2B17D8-048 requires 20gf with 1gf release force. Selection depends on actuator sensitivity requirements for the application.

Q: Why do V15T16-CZ100A03-K and V15T16-CZ300A03-K use 0.250" termination instead of 0.187"?

A: The V15 series is designed for higher current capacity (16A vs. 100mA). The larger 0.250" quick-connect termination accommodates increased current flow and provides improved contact reliability. Mechanical redesign of the switch mounting interface is required for these parts.

Q: Are all substitute parts RoHS compliant?

A: All active-status substitute parts listed (D413-R1LD-G2, V7-1B17D8-048, V7-2B17D8-048, LS0851503F040C1A, LS0851503F060C1A, V15T16-CZ100A03-K, V15T16-CZ300A03-K) carry RoHS3 or RoHS compliance certification. The original AM50013C33-A is obsolete and does not carry current compliance documentation.

Q: Which substitute provides the closest match to AM50013C33-A specifications?

A: D413-R1LD-G2 provides the closest electrical and mechanical match with identical current capacity (100mA), termination style (0.187" Quick Connect), mounting type (Chassis Mount), and circuit configuration (SPDT). This part is recommended as the primary substitute for direct replacement applications.

Q: Can LS0851503F040C1A and LS0851503F060C1A be used interchangeably?

A: Both parts share identical electrical ratings, circuit configuration, termination, and mounting specifications. The difference is operating force: LS0851503F040C1A requires 40gf with 15gf release force, while LS0851503F060C1A requires 60gf with 25gf release force. Selection depends on actuator force requirements for the specific application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message