AM50010C53-A Equivalent & Substitute Parts

Part Overview

The AM50010C53-A is a SPDT snap action switch manufactured by Panasonic Electric Works, designed for chassis mount applications with quick connect termination. This component operates at 0.1A (100mA) and 125V AC, featuring a round pin plunger actuator with on-momentary switch function. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations where this functionality is required.

Substiute Parts

AM50010C53-A

Panasonic Electric WorksIn Stock: 981AM50010C53-A Datasheet

Current PartRFQ

83161806

CrouzetIn Stock: 78583161806 Datasheet

SimilarRFQ

D413-R1AA-G2

ZF ElectronicsIn Stock: 1605D413-R1AA-G2 Datasheet

SimilarRFQ

LS0851500F250C1A

E-SwitchIn Stock: 993LS0851500F250C1A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AM50010C53-A is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration must be SPDT
• Switch function must be On-Mom
• Actuator type must be Round (Pin Plunger)
• Mounting type must be Chassis Mount
• Current rating must support minimum 100mA
• Voltage rating (AC) must support minimum 125V
• Termination style must be Quick Connect format

Substitute Parts Identified:

1. D413-R1AA-G2 (ZF Electronics) - Meets all primary criteria with 100mA AC and 250V AC rating, maintaining 0.187" (4.7mm) quick connect termination and chassis mount configuration.

2. LS0851500F250C1A (E-Switch) - Exceeds current rating at 15A AC with 125V AC voltage match, maintains identical actuator type, mounting, and termination specifications.

3. 83161806 (Crouzet) - Provides higher current capacity at 5A AC and elevated voltage rating at 250V AC, with chassis mount and quick connect termination, though termination connector size differs at 0.250" (6.3mm).

Parameter Comparison

Engineering Selection Recommendations

D413-R1AA-G2 (ZF Electronics) - Primary substitute for direct replacement applications. This part maintains electrical specifications matching the original design (100mA AC, 30V DC) with identical termination connector size (0.187"). The part is active in production with ROHS3 compliance certification. Operating temperature range is reduced to -40°C to 85°C compared to the original -25°C to 105°C specification. Electrical life is rated at 50,000 cycles versus the original 100,000 cycles. This substitute is suitable for applications where the original temperature and cycle life specifications are not critical constraints.

LS0851500F250C1A (E-Switch) - Suitable for applications requiring higher current capacity. This part provides 15A AC rating at 125V AC, matching the original voltage specification. Termination connector size remains identical at 0.187" (4.7mm). The part is active with ROHS3 compliance. Operating temperature range is -25°C to 85°C, and mechanical life is rated at 1,000,000 cycles. This substitute is appropriate for designs where increased current handling is beneficial or where the original 100mA specification provides insufficient margin.

83161806 (Crouzet) - Alternative for applications with elevated voltage and current requirements. This part provides 5A AC at 250V AC with extended operating temperature range of -60°C to 150°C and mechanical life of 20,000,000 cycles. The termination connector size differs at 0.250" (6.3mm), requiring connector interface modification. This substitute is applicable where higher voltage and temperature extremes are design requirements.

Frequently Asked Questions (FAQ)

Q: Can D413-R1AA-G2 be used as a direct replacement for AM50010C53-A?

A: D413-R1AA-G2 is functionally compatible as a substitute. Both parts share identical circuit configuration (SPDT), switch function (On-Mom), actuator type (round pin plunger), mounting type (chassis mount), and termination connector size (0.187" quick connect). Electrical specifications match at 100mA AC and 30V DC. The primary differences are reduced operating temperature range (-40°C to 85°C versus -25°C to 105°C) and lower electrical life rating (50,000 cycles versus 100,000 cycles). Substitution is appropriate when these parameter reductions do not conflict with application requirements.

Q: What is the difference between the three substitute parts?

A: The three substitutes differ primarily in current and voltage ratings. D413-R1AA-G2 matches the original current specification at 100mA but increases voltage to 250V AC. LS0851500F250C1A increases current to 15A while maintaining 125V AC voltage. 83161806 provides the highest current at 5A and voltage at 250V AC but requires a larger termination connector (0.250" versus 0.187"). All three maintain SPDT circuit configuration and on-momentary function with round pin plunger actuation and chassis mount design.

Q: Does termination connector size affect substitution compatibility?

A: Termination connector size is a critical mechanical parameter. D413-R1AA-G2 and LS0851500F250C1A both use 0.187" (4.7mm) quick connect termination, matching the original AM50010C53-A specification. 83161806 uses 0.250" (6.3mm) termination, requiring modification to the mating connector interface or PCB layout. Direct substitution without hardware modification is possible only with parts maintaining identical termination specifications.

Q: Are all substitute parts RoHS compliant?

A: D413-R1AA-G2 and LS0851500F250C1A are both ROHS3 compliant. RoHS compliance status for 83161806 is not specified in the provided data. Compliance verification is necessary before selection for applications with RoHS requirements.

Q: What are the operating temperature implications of substitution?

A: The original AM50010C53-A operates from -25°C to 105°C. D413-R1AA-G2 operates from -40°C to 85°C, providing lower temperature capability but reduced upper temperature limit. LS0851500F250C1A operates from -25°C to 85°C, matching the lower temperature but reducing upper limit. 83161806 operates from -60°C to 150°C, providing the widest temperature range. Selection depends on application temperature requirements.