AM1513F Equivalent & Substitute Parts

Part Overview

The AM1513F is a snap action switch manufactured by Panasonic Electric Works, configured as a Single Pole Double Throw (SPDT) device with on-momentary function. This component is rated for 10A AC at 125V and features a lever roller actuator with chassis mount configuration and solder lug termination. The product is currently obsolete, making identification of functionally equivalent alternatives necessary for system maintenance, repair, and legacy equipment support.

Substiute Parts

AM1513F

Panasonic Electric WorksIn Stock: 1071AM1513F Datasheet

Current PartRFQ

BZ-2RW822-A2

Honeywell Sensing and Productivity SolutionsIn Stock: 2305BZ-2RW822-A2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AM1513F is determined by strict alignment of electrical and mechanical parameters. The primary substitute identified is the BZ-2RW822-A2 from Honeywell Sensing and Productivity Solutions. This substitution is valid based on the following criteria:

Matching Parameters:

• Circuit configuration: Both SPDT
• Switch function: Both on-momentary
• Voltage rating: Both 125V AC and 125V DC
• Actuator type: Both lever with roller
• Mounting type: Both chassis mount
• Operating position: Identical at 1.188" (30.2mm)

Allowable Variations:

• Current rating: BZ-2RW822-A2 rated 15A AC (exceeds 10A requirement)
• Termination style: BZ-2RW822-A2 uses screw terminal instead of solder lug (mechanical interface difference)
• Operating temperature: BZ-2RW822-A2 range -55°C to 85°C (wider than AM1513F)
• Mechanical life: BZ-2RW822-A2 rated 20,000,000 cycles (exceeds AM1513F specification)

Parameter Comparison

Engineering Selection Recommendations

The BZ-2RW822-A2 serves as a direct functional equivalent for the obsolete AM1513F in applications requiring SPDT snap action switching at 125V. The substitute part exceeds the original specification in current capacity (15A versus 10A), operating temperature range, and mechanical life rating, providing enhanced performance margins for legacy system replacement.

The primary consideration for implementation is termination style compatibility. The AM1513F uses solder lug termination while the BZ-2RW822-A2 employs screw terminal connection. Circuit board or wiring harness modification may be required to accommodate this interface difference.

The BZ-2RW822-A2 is an active product with RoHS compliance and REACH unaffected status, ensuring long-term availability and regulatory alignment for new installations or system upgrades.

Frequently Asked Questions (FAQ)

Q: Can the BZ-2RW822-A2 directly replace the AM1513F without modification?

A: Electrical and functional compatibility is confirmed. However, termination style differs: the AM1513F uses solder lugs while the BZ-2RW822-A2 uses screw terminals. Connection method adaptation is required based on your circuit implementation.

Q: What is the significance of the higher current rating on the BZ-2RW822-A2?

A: The BZ-2RW822-A2 is rated for 15A AC compared to the AM1513F's 10A AC. This higher rating provides additional safety margin and allows the substitute to handle applications at or below the original 10A specification without derating.

Q: Are there differences in switching characteristics between these parts?

A: Differential travel differs: AM1513F at 0.050" (1.3mm) versus BZ-2RW822-A2 at 0.020" (0.5mm). This represents a tighter hysteresis band on the substitute, which may affect switching precision in sensitive applications. Operating position remains identical at 1.188" (30.2mm).

Q: What is the operating temperature impact of substitution?

A: The BZ-2RW822-A2 operates across -55°C to 85°C, compared to the AM1513F range of -25°C to 80°C. The substitute provides extended low-temperature capability, suitable for wider environmental conditions.

Q: Is the BZ-2RW822-A2 available for new designs?

A: Yes. The BZ-2RW822-A2 is an active product with RoHS compliance certification, making it suitable for both legacy replacement and new system development.