AM1307F Equivalent & Substitute Parts

Part Overview

The Panasonic Electric Works AM1307F is a snap action SPDT switch with panel mount configuration, rated for 10A AC at 125V and 500mA DC at 125V. This component features an overtravel plunger actuator with screw terminal termination and is classified as obsolete. Due to its obsolete status, equivalent substitute parts from active manufacturers are necessary to maintain system functionality and ensure continued component availability for new designs and field replacements.

Key Parameters

Parameter	AM1307F Value
Manufacturer	Panasonic Electric Works
Circuit Configuration	SPDT
Switch Function	On-Mom
Current Rating (AC)	10A
Current Rating (DC)	500mA
Voltage Rating (AC)	125V
Voltage Rating (DC)	125V
Actuator Type	Overtravel Plunger
Mounting Type	Panel Mount
Termination Style	Screw Terminal
Operating Position	0.859" (21.8mm)
Operating Temperature Range	-25°C to 80°C
Electrical Life	500,000 Cycles
Mechanical Life	5,000,000 Cycles
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the AM1307F is determined by the following critical parameters:

Primary Compatibility Criteria:

Circuit configuration must be SPDT
Switch function must be On-Mom
Mounting type must be Panel Mount
Termination style must be Screw Terminal
Operating position tolerance: 0.859" ± acceptable mechanical variance
Voltage rating (AC) must support 125V minimum
Current rating must meet or exceed 10A AC and 500mA DC requirements

Substitute Parts Identified:

Group 1 - Direct Current Rating Match (10A AC, 500mA DC):

X-10GQ-B (Omron) – Matches 10A DC rating; voltage limited to 30V DC
HBS2KCB4SJ055C (C&K) – Matches 20A AC, 500mA DC; enhanced ingress protection IP65

Group 2 - Higher Current Rating (15A AC, 6A DC):

Z-15GQ-B (Omron) – 15A AC, 6A DC; standard operating position
Z-15GQ8-B (Omron) – 15A AC, 6A DC; extended operating position 1.281"
Z-15GQ3-B (Omron) – 15A AC, 6A DC; shortened operating position 0.740"
Z-15GQ55-B (Omron) – 15A AC, 6A DC; enhanced ingress protection IP62
Z-15HQ-B (Omron) – 15A AC, 2A DC; optimized for lower DC current

Group 3 - Higher Current Rating (20A AC, 6A DC):

A-20GQ-B (Omron) – 20A AC, 6A DC; voltage limited to 30V DC

Group 4 - Lower Current Rating (100mA AC/DC):

Z-01HQ-B (Omron) – 100mA AC/DC; signal-level switching application

Parameter Comparison

Part Number	Manufacturer	Circuit	Current (AC)	Current (DC)	Voltage (AC)	Voltage (DC)	Actuator	Operating Position	Operating Temp	Electrical Life	Product Status
AM1307F	Panasonic	SPDT	10A	500mA	125V	125V	Overtravel Plunger	0.859"	-25 to 80°C	500,000	Obsolete
A-20GQ-B	Omron	SPDT	20A	6A	125V	30V	Overtravel Plunger	0.859"	-25 to 80°C	500,000	Active
HBS2KCB4SJ055C	C&K	SPDT	20A	500mA	125V	125V	Overtravel Plunger	0.860"	-55 to 150°C	150,000	Active
X-10GQ-B	Omron	SPDT	10A	10A	—	30V	Round Pin Plunger	0.859"	-25 to 80°C	100,000	Active
Z-01HQ-B	Omron	SPDT	100mA	100mA	125V	30V	Overtravel Plunger	0.859"	-25 to 80°C	500,000	Active
Z-15EQ-B	Omron	SPDT	15A	15A	125V	30V	Overtravel Plunger	0.859"	-25 to 80°C	100,000	Active
Z-15GQ-B	Omron	SPDT	15A	6A	125V	30V	Overtravel Plunger	0.859"	-25 to 80°C	500,000	Active
Z-15GQ3-B	Omron	SPDT	15A	6A	125V	30V	Overtravel Plunger	0.740"	-25 to 80°C	500,000	Active
Z-15GQ55-B	Omron	SPDT	15A	6A	125V	30V	Overtravel Plunger	0.859"	-15 to 80°C	500,000	Active
Z-15GQ8-B	Omron	SPDT	15A	6A	125V	30V	Overtravel Plunger	1.281"	-25 to 80°C	500,000	Active
Z-15HQ-B	Omron	SPDT	15A	2A	125V	30V	Overtravel Plunger	0.859"	-25 to 80°C	500,000	Active

Engineering Selection Recommendations

Primary Recommendation: Z-15GQ-B

The Z-15GQ-B from Omron Automation and Safety is the optimal substitute for the AM1307F. This part maintains identical mechanical dimensions (0.859" operating position), supports 125V AC operation, and provides 15A AC current capacity with 6A DC capability. The part is active in production status with RoHS3 compliance and REACH unaffected designation. Electrical life rating of 500,000 cycles matches the original specification. Mechanical life of 10,000,000 cycles exceeds the original 5,000,000 cycle requirement.

Secondary Recommendation: HBS2KCB4SJ055C

The HBS2KCB4SJ055C from C&K provides exact voltage matching (125V AC/DC) and maintains the original 500mA DC current specification. This part offers enhanced environmental protection with IP65 ingress rating and extended operating temperature range (-55°C to 150°C). The trade-off is reduced electrical life (150,000 cycles versus 500,000 cycles). This substitute is suitable for applications requiring enhanced environmental sealing.

Alternative for DC-Limited Applications: X-10GQ-B

The X-10GQ-B from Omron matches the 10A current specification but operates at 30V DC maximum. This substitute is appropriate only for applications where DC voltage does not exceed 30V. The part features RoHS3 compliance and REACH affected status.

Not Recommended for Direct Substitution:

Z-01HQ-B is unsuitable for the AM1307F application due to significantly reduced current rating (100mA). This part is intended for signal-level switching only.

Frequently Asked Questions (FAQ)

Q: Can Z-15GQ-B directly replace AM1307F in all applications?

A: Z-15GQ-B is mechanically and electrically compatible for applications operating at 125V AC. The higher current rating (15A AC versus 10A AC) provides design margin. However, DC voltage operation is limited to 30V maximum with Z-15GQ-B, compared to 125V DC for the original part. Verify DC voltage requirements before substitution.

Q: What is the difference between Z-15GQ-B, Z-15GQ8-B, and Z-15GQ3-B?

A: All three parts share identical electrical specifications (15A AC, 6A DC, 125V AC, 30V DC). The differences are mechanical: Z-15GQ-B has standard 0.859" operating position; Z-15GQ8-B has extended 1.281" position for deeper panel mounting; Z-15GQ3-B has shortened 0.740" position for shallow panel applications. Select based on panel thickness and mounting depth requirements.

Q: Why does HBS2KCB4SJ055C have lower electrical life than Z-15GQ-B?

A: The HBS2KCB4SJ055C is rated for 150,000 electrical cycles versus 500,000 for Z-15GQ-B. This reflects different design optimization: HBS2KCB4SJ055C prioritizes environmental sealing (IP65) and extended temperature range, while Z-15GQ-B optimizes for cycle life. Select based on application duty cycle and environmental requirements.

Q: Is Z-15GQ55-B suitable for outdoor applications?

A: Z-15GQ55-B provides IP62 ingress protection (dust tight, water resistant) and maintains the standard 0.859" operating position. This variant is appropriate for applications requiring moisture resistance. However, DC voltage remains limited to 30V maximum.

Q: What compliance certifications apply to substitute parts?

A: Z-15GQ-B, Z-15GQ8-B, Z-15GQ3-B, and Z-15HQ-B carry RoHS3 compliance. HBS2KCB4SJ055C carries ROHS3 compliance. X-10GQ-B carries ROHS3 compliance. All parts are classified under ECCN EAR99. Verify specific compliance requirements for your application jurisdiction.

Q: Can X-10GQ-B replace AM1307F in 125V AC applications?

A: X-10GQ-B is not rated for AC operation. This part is specified for 10A DC at 30V maximum only. It is unsuitable for 125V AC applications.

Q: What is the impact of different actuator types (Overtravel Plunger versus Round Pin Plunger)?

A: X-10GQ-B uses a round pin plunger actuator, while AM1307F uses an overtravel plunger. This affects mechanical feel and actuation characteristics. The round pin design may require different mounting hardware or panel cutout specifications. Verify mechanical compatibility with existing panel designs before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message