ALS80H223DF063 Equivalent & Substitute Parts

Part Overview

The ALS80H223DF063 is a 22000 µF, 63 V aluminum electrolytic capacitor with screw terminals, manufactured by KEMET in the ALS80 series. This component is classified as Active and is designed for general-purpose applications requiring high-capacitance energy storage in chassis-mounted configurations. The part is ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic component manufacturing.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category, allowing for direct functional replacement in circuit designs without performance degradation.

Substiute Parts

ALS80H223DF063

KEMETIn Stock: 1008ALS80H223DF063 Datasheet

Current PartRFQ

ALS80A223DF063

KEMETIn Stock: 1047ALS80A223DF063 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ALS80H223DF063 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 22000 µF
• Voltage Rating: 63 V
• Tolerance: ±20%
• ESR @ 100Hz: 22 mOhm
• Lifetime @ 105°C: 6000 Hrs
• Operating Temperature Range: -40°C to 105°C
• Ripple Current @ 100 Hz: 11.5 A
• Ripple Current @ 10 kHz: 14.7 A
• Impedance: 18 mOhms

Mechanical Parameters (Must Match Exactly):

• Lead Spacing: 12.80 mm
• Diameter: 36.00 mm
• Height - Seated (Max): 107.00 mm
• Mounting Type: Chassis Mount
• Package / Case: Radial, Can - Screw Terminals
• Polarization: Polar

Compliance Parameters (Must Match Exactly):

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected
• Product Status: Active

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The ALS80A223DF063 is a direct parametric equivalent to the ALS80H223DF063. Both parts are manufactured by KEMET, maintain identical electrical specifications, and share the same mechanical form factor with screw terminal connections. Both components are Active products with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications.

Selection between these parts may be based on inventory availability, lead time, or procurement source. The ALS80H223DF063 has 981 pieces in stock, while the ALS80A223DF063 has 937 pieces in stock. Both parts are suitable for direct substitution in chassis-mounted applications requiring 22000 µF capacitance at 63 V with extended operational life at elevated temperatures.

Frequently Asked Questions (FAQ)

Q: Can the ALS80A223DF063 be used as a direct replacement for the ALS80H223DF063?

A: Yes. The ALS80A223DF063 is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including capacitance, voltage rating, ESR, ripple current ratings, physical dimensions, and compliance certifications match exactly.

Q: Are there any differences in the screw terminal connections between these parts?

A: No. Both parts use identical Radial, Can - Screw Terminal packaging with 12.80 mm lead spacing, ensuring mechanical compatibility in existing circuit board layouts and chassis mounting configurations.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the ALS80H223DF063 and ALS80A223DF063 are ROHS3 compliant and REACH unaffected, meeting current environmental and safety regulations for electronic component manufacturing.

Q: What is the difference between the ALS80H and ALS80A series designations?

A: The series designation difference (H versus A) does not affect the electrical or mechanical performance of these specific part numbers. Both parts maintain identical specifications for capacitance, voltage, ESR, temperature ratings, and physical dimensions.

Q: Can these capacitors be used interchangeably in high-ripple-current applications?

A: Yes. Both parts are rated for 11.5 A ripple current at 100 Hz and 14.7 A ripple current at 10 kHz, with identical impedance characteristics of 18 mOhms, making them suitable for equivalent performance in high-ripple-current circuit designs.

Q: What is the operational temperature range for both parts?

A: Both parts operate across the temperature range of -40°C to 105°C with a rated lifetime of 6000 hours at 105°C, providing consistent performance across industrial and commercial temperature environments.