ALS71A822DA063 Equivalent & Substitute Parts

Part Overview

The ALS71A822DA063 is an 8200 µF, 63 V aluminum electrolytic capacitor manufactured by KEMET, designed for general-purpose applications requiring high capacitance in a compact radial, can-style package with screw terminals. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are required for circuit design flexibility, inventory management, or component availability optimization.

Substiute Parts

ALS71A822DA063

KEMETIn Stock: 923ALS71A822DA063 Datasheet

Current PartRFQ

ALS70A822DA063

KEMETIn Stock: 1367ALS70A822DA063 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ALS71A822DA063 are identified based on strict electrical and mechanical parameter equivalence. The following criteria determine substitution eligibility:

Electrical Parameters:

• Capacitance: 8200 µF (exact match required)
• Voltage Rating: 63 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR @ 100Hz: 56 mOhm (exact match required)
• Lifetime @ Temperature: 11000 Hrs @ 85°C (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Ripple Current @ 100 Hz: 8 A (exact match required)
• Ripple Current @ 10 kHz: 11.1 A (exact match required)
• Impedance: 44 mOhms (exact match required)

Mechanical Parameters:

• Package / Case: Radial, Can - Screw Terminals (exact match required)
• Mounting Type: Chassis Mount (exact match required)
• Size / Dimension: 1.417" Dia (36.00mm) (exact match required)
• Height - Seated (Max): 2.126" (54.00mm) (exact match required)
• Lead Spacing: 0.504" (12.80mm) (exact match required)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The ALS70A822DA063 meets all substitution criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the ALS71A822DA063 and ALS70A822DA063 are Active product status components manufactured by KEMET with identical electrical and mechanical specifications. Both parts are RoHS3 compliant and REACH unaffected, meeting current regulatory requirements for industrial and commercial applications.

The primary distinction between these parts is the series designation: ALS71 versus ALS70. This series difference reflects internal design iterations within KEMET's product line while maintaining complete parametric equivalence. Both components are suitable for general-purpose applications requiring 8200 µF capacitance at 63 V with screw terminal connectivity.

Selection between these parts is determined by availability, inventory status, and procurement requirements. The ALS70A822DA063 currently maintains higher inventory levels (1277 Pcs) compared to the ALS71A822DA063 (824 Pcs), which may influence component sourcing decisions.

Frequently Asked Questions (FAQ)

Q: Can the ALS70A822DA063 be used as a direct replacement for the ALS71A822DA063?

A: Yes. The ALS70A822DA063 is a parametric equivalent with identical electrical performance, mechanical dimensions, and compliance certifications. Direct substitution is supported for all applications where the ALS71A822DA063 is specified.

Q: Are there any differences in physical dimensions between these parts?

A: No. Both parts share identical dimensions: 1.417" diameter (36.00mm), 2.126" maximum seated height (54.00mm), and 0.504" lead spacing (12.80mm). Mechanical compatibility is complete.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the ALS71A822DA063 and ALS70A822DA063 are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS coding (8532.22.0055).

Q: What is the difference between the ALS71 and ALS70 series designations?

A: The series designation reflects KEMET's internal product line classification. Both series maintain identical performance specifications for this 8200 µF, 63 V capacitor model.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Both parts provide 8200 µF capacitance at 63 V with ±20% tolerance, 56 mOhm ESR @ 100Hz, 11000 hours lifetime @ 85°C, and identical ripple current ratings at both low and high frequencies.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The ALS70A822DA063 and ALS71A822DA063 are fully interchangeable. No circuit modifications, PCB layout changes, or design revisions are required for substitution.