Equivalent & Substitute Parts Reference for ALPHA8/1M/SMAM/S/S/1

Part Overview

The Siretta Ltd ALPHA8/1M/SMAM/S/S/1 is an RF antenna designed for cellular applications, specifically covering frequency bands at 850MHz, 868MHz, 900MHz, 1.8GHz, 1.9GHz, and 2.1GHz. It features a flat bar design, SMA Male termination, IP66 ingress protection, adhesive mounting, and a peak gain of 2dBi. With a maximum height of 3.00mm, it is suitable for GPRS, GSM, and UMTS applications. This part is categorized as obsolete, making it necessary to identify alternative models to ensure continued supply and design compatibility in ongoing and future projects.

Substiute Parts

ALPHA8/1M/SMAM/S/S/1

Siretta LtdIn Stock: 776ALPHA8/1M/SMAM/S/S/1 Datasheet

Current PartRFQ

ALPHA8/1M/SMAM/S/S/11

Siretta LtdIn Stock: 932ALPHA8/1M/SMAM/S/S/11 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is permitted when all of the following key parameters are equivalent or within defined limits: manufacturer, frequency group, supported center/band frequencies, antenna type, number of bands, mounting type, termination, maximum height, VSWR, ingress protection, and application support. Obsolescence of the main part (ALPHA8/1M/SMAM/S/S/1) necessitates selection of available alternatives that meet the provided specifications. Substitute listings only include parts with verified electrical and mechanical compatibility per the specified data.

Parameter Comparison

Engineering Selection Recommendations

Selecting ALPHA8/1M/SMAM/S/S/11 as a substitute is justified due to its active status, same manufacturer (Siretta Ltd), consistent series, and matching Moisture Sensitivity Level and ECCN. Ensure that the substitute conforms to compliance requirements specified by ECCN EAR99 and the original series. No changes to technical selection criteria or certifications are introduced.

Frequently Asked Questions (FAQ)

Q1: What are the mandatory criteria for substituting ALPHA8/1M/SMAM/S/S/1?
A1: Substitution requires matching manufacturer, series, application category, product status, ECCN, MSL, and alignment of essential electrical and mechanical parameters as supplied.

Q2: Are there differences in packaging between the main and substitute part?
A2: The main part is supplied in bulk, while the substitute is packaged in a bag. Packaging can impact handling but does not alter electrical or mechanical compatibility.

Q3: Does the revision from obsolete to active status affect functionality?
A3: No, product status (obsolete/active) does not affect the core operational parameters as long as the rest of the criteria are matched.

Q4: Is further compliance review necessary for substitution?
A4: Substitution is strictly based on part status, ECCN, and MSL. Ensure regulatory alignment for the application environment.

Q5: Can parts from other manufacturers be considered with the available data?
A5: No, only Siretta Ltd parts have been evaluated as substitutes according to the provided parameters.

Q6: Are mounting type or termination differences permitted?
A6: No, substitutes must retain identical mounting type and termination as specified for the series and application.