ALD2702APAL Equivalent & Substitute Parts Reference

Part Overview

The ALD2702APAL is a CMOS dual amplifier IC from Advanced Linear Devices Inc., categorized under Linear, Amplifiers. This device offers two push-pull, rail-to-rail CMOS amplifier circuits in an 8-DIP through-hole package and operates within a supply voltage of 4 V to 10 V. The part is active and RoHS3 compliant, with a standard operating temperature range of 0°C to 70°C.

Finding alternative models for the ALD2702APAL may be necessary to ensure supply continuity and design flexibility, especially if sourcing schedules, supply chain, or certification status change. Substitute parts must match all critical electrical characteristics and mechanical footprints strictly based on the parameters provided.

Substiute Parts

ALD2702APAL

Advanced Linear Devices Inc.In Stock: 923ALD2702APAL Datasheet

Current PartRFQ

OPA2705PA

Burr BrownIn Stock: 2257OPA2705PA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ALD2702APAL are grouped strictly based on these allowed parameters:

• Amplifier Type: CMOS
• Number of Circuits: 2
• Output Type: Rail-to-Rail or Push-Pull, Rail-to-Rail
• Slew Rate
• Gain Bandwidth Product
• Current - Input Bias
• Voltage - Input Offset
• Current - Supply
• Current - Output / Channel
• Voltage - Supply Span (Min/Max)
• Operating Temperature
• Mounting Type
• Package / Case
• Supplier Device Package
• Product Status

Only substitutes that fully match or fall within the specified range for these electrical and mechanical parameters are included.

Parameter Comparison

Engineering Selection Recommendations

Both ALD2702APAL and OPA2705PA have active product status and meet provided RoHS compliance. Selection may be made based on product status and compliance certifications as supplied, ensuring requirements for current inventory and regulatory status are fulfilled. Certifications and product activity should be strictly confirmed as per the provided parameters.

Frequently Asked Questions (FAQ)

Q1: Which electrical parameters are required to match when selecting a substitute for ALD2702APAL?
A1: Matching electrical parameters include amplifier type, number of circuits, output type, slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current per channel, supply voltage range, and operating temperature.

Q2: Is package compatibility ensured between ALD2702APAL and OPA2705PA?
A2: Both parts feature through-hole mounting, the same 8-DIP (0.300", 7.62mm) package, and supplier device package designation (8-PDIP).

Q3: Are compliance and product status equivalent?
A3: Both ALD2702APAL and OPA2705PA are noted as active products with RoHS compliance. Product status and certification alignment are strictly according to the provided part details.

Q4: Can OPA2705PA be used directly as a substitute for ALD2702APAL regarding circuit pinout?
A4: Pinout and package equivalence are per the 8-DIP (0.300", 7.62mm) through-hole format and supplier device package (8-PDIP), as specified.

Q5: What are the primary distinctions between ALD2702APAL and OPA2705PA within allowed parameters?
A5: Notable differences are found in slew rate, gain bandwidth product, supply current, output current capability, and input offset voltage, within specified substitution criteria. Mechanical characteristics and regulatory status are equivalent based on provided data.