AISC-1008-R022J-T Equivalent & Substitute Parts

Part Overview

The AISC-1008-R022J-T is a 22 nH unshielded drum core wirewound inductor manufactured by Abracon LLC, rated for 1 A continuous current with a maximum DC resistance of 120 mOhm. This surface mount component is designed for high-frequency applications and is currently in active production status. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

AISC-1008-R022J-T

Abracon LLCIn Stock: 1076AISC-1008-R022J-T Datasheet

Current PartRFQ

36502C22NJTDG

TE Connectivity Passive ProductIn Stock: 619236502C22NJTDG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AISC-1008-R022J-T is determined by strict equivalence across the following critical parameters:

Inductance value must match exactly at 22 nH with ±5% tolerance. Current rating must be rated for minimum 1 A continuous operation. DC resistance must not exceed 120 mOhm maximum. Package footprint must be 1008 (2520 Metric) surface mount to ensure PCB compatibility. Core material must be ceramic. Shielding configuration must be unshielded. Operating temperature range must span -40°C to 125°C minimum. Self-resonant frequency must be 2.4 GHz or higher.

The substitute part 36502C22NJTDG from TE Connectivity Passive Product meets all these criteria and is therefore classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the AISC-1008-R022J-T and 36502C22NJTDG are active production components with ROHS3 compliance and MSL 1 rating. The TE Connectivity part carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. The physical height difference of 0.007" (0.19 mm) between the two parts is within typical PCB assembly tolerances and does not impact functional performance or mechanical fit in standard 1008 package footprints. Both parts are suitable for direct substitution in RF and high-frequency circuit applications operating within the specified temperature range.

Frequently Asked Questions (FAQ)

Q: Can 36502C22NJTDG replace AISC-1008-R022J-T in my design?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters: 22 nH inductance, ±5% tolerance, 1 A current rating, 120 mOhm maximum DC resistance, ceramic core, unshielded configuration, and 1008 (2520 Metric) surface mount package. The slight height difference (0.007") does not affect PCB assembly or circuit performance.

Q: What is the significance of the AEC-Q200 rating on the TE Connectivity part?

A: AEC-Q200 is an automotive electronics qualification standard. The 36502C22NJTDG carries this certification, indicating it meets automotive reliability and quality requirements. This is an additional qualification not specified for the Abracon part but does not affect general-purpose RF applications.

Q: Are there any compliance differences between these parts?

A: Both parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating. The TE Connectivity part lists REACH status as Vendor Undefined, while the Abracon part is REACH Unaffected. Both carry EAR99 ECCN classification and identical HTSUS codes.

Q: Will the 0.007" height difference cause assembly issues?

A: No. The height difference between the two parts (2.29 mm vs. 2.10 mm) is within standard PCB assembly tolerances and does not impact solder reflow, component placement, or clearance in typical circuit board designs using 1008 package inductors.

Q: Are these parts suitable for high-frequency applications?

A: Yes. Both parts are specified for high-frequency operation with a self-resonant frequency of 2.4 GHz and Q factor of 55 at 350 MHz, making them suitable for RF and microwave circuit applications within the -40°C to 125°C operating range.