AISC-0603-R0082J-T Equivalent & Substitute Parts

Part Overview

The AISC-0603-R0082J-T is an 8.2 nH unshielded drum core wirewound inductor manufactured by Abracon LLC, rated for 700 mA with a maximum DC resistance of 95mOhm. This component is designed for high-frequency applications requiring low inductance values in a compact surface mount package. The part maintains Active product status and is fully RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for this inductance category.

Substiute Parts

AISC-0603-R0082J-T

Abracon LLCIn Stock: 1054AISC-0603-R0082J-T Datasheet

Current PartRFQ

CW160808-8N2J

Bourns Inc.In Stock: 16150CW160808-8N2J Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AISC-0603-R0082J-T is determined by the following critical parameters:

• Inductance value of 8.2 nH with ±5% tolerance
• Current rating of 700 mA minimum
• Unshielded drum core wirewound construction
• Surface mount configuration
• Operating temperature range of -40°C to 125°C
• RoHS3 compliance and REACH unaffected status

The CW160808-8N2J from Bourns Inc. qualifies as a substitute because it maintains identical inductance, tolerance, current rating, and core type specifications. Minor variations in DC resistance (110mOhm versus 95mOhm maximum) and physical dimensions remain within acceptable engineering parameters for this component category, as both parts meet the electrical performance requirements for 8.2 nH inductors in surface mount applications.

Parameter Comparison

Engineering Selection Recommendations

Both the AISC-0603-R0082J-T and CW160808-8N2J maintain Active product status and full compliance with RoHS3 and REACH regulations. Selection between these parts should be based on availability, lead time, and application-specific requirements regarding DC resistance tolerance. The Abracon part offers lower maximum DC resistance at 95mOhm, while the Bourns substitute operates at 110mOhm maximum. For applications where DC resistance is a critical design parameter, the lower resistance specification of the AISC-0603-R0082J-T may be preferred. Both parts are suitable for high-frequency circuit applications requiring 8.2 nH inductance in surface mount form factor.

Frequently Asked Questions (FAQ)

Q: Can the CW160808-8N2J replace the AISC-0603-R0082J-T in my design?

A: Yes, the CW160808-8N2J qualifies as a substitute. Both parts share identical inductance (8.2 nH), tolerance (±5%), current rating (700 mA), core type (drum core wirewound), and operating temperature range (-40°C to 125°C). The primary difference is DC resistance specification: 95mOhm maximum for the Abracon part versus 110mOhm for the Bourns part.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by inductance value, tolerance, current rating, core construction type, shielding configuration, operating temperature range, and compliance certifications. All these parameters must match or exceed the original part specifications.

Q: Are there package compatibility concerns between these parts?

A: Both parts are surface mount inductors. The AISC-0603-R0082J-T uses a nonstandard package, while the CW160808-8N2J uses the 0603 (1608 Metric) standard package. Physical dimensions differ slightly, so PCB footprint verification is necessary before substitution.

Q: Do both parts meet regulatory requirements?

A: Yes, both the AISC-0603-R0082J-T and CW160808-8N2J are RoHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: How do the Q factor and self-resonant frequency compare?

A: The AISC-0603-R0082J-T exhibits a Q factor of 31 at 250MHz with a self-resonant frequency of 6GHz, while the CW160808-8N2J shows a Q factor of 30 at 250MHz with a self-resonant frequency of 5GHz. These minor differences remain within acceptable parameters for equivalent 8.2 nH inductors.