AIML-0805-4R7K-T Equivalent & Substitute Parts

Part Overview

The AIML-0805-4R7K-T is a 4.7 µH shielded multilayer inductor manufactured by Abracon LLC, designed for surface mount applications in the 0805 (2012 Metric) package. This component operates at 30 mA current rating with 1Ohm DC resistance and is classified as Active product status. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

AIML-0805-4R7K-T

Abracon LLCIn Stock: 901AIML-0805-4R7K-T Datasheet

Current PartRFQ

CV201210-4R7K

Bourns Inc.In Stock: 13001CV201210-4R7K Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AIML-0805-4R7K-T is determined by strict equivalence across the following parameters:

• Inductance value: 4.7 µH with ±10% tolerance
• Current rating: 30 mA minimum
• DC resistance: 1Ohm maximum
• Package footprint: 0805 (2012 Metric) surface mount
• Shielding type: Shielded construction
• Core material: Ferrite
• Operating temperature range: -55°C ~ 125°C minimum
• Q factor and self-resonant frequency characteristics

The CV201210-4R7K from Bourns Inc. meets all substitution criteria within these defined parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the AIML-0805-4R7K-T and CV201210-4R7K are Active product status components with equivalent electrical and mechanical specifications. Selection between these parts is based on:

• Availability and supply chain considerations
• Height constraint requirements: The AIML-0805-4R7K-T has a maximum seated height of 0.041" (1.05mm), while the CV201210-4R7K has a maximum seated height of 0.057" (1.45mm). Applications with strict height limitations should specify the Abracon part.
• Compliance certifications: Both parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 rating, suitable for standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can CV201210-4R7K replace AIML-0805-4R7K-T in all applications?

A: The CV201210-4R7K meets all electrical specifications and operates within the same temperature range. The primary consideration is the height difference: 0.041" versus 0.057" maximum seated height. Applications with PCB clearance constraints below 1.45mm may require the Abracon part.

Q: Are there differences in DC resistance between these parts?

A: The AIML-0805-4R7K-T specifies 1Ohm DC resistance, while the CV201210-4R7K specifies 1Ohm Max. Both are equivalent for circuit design purposes within the stated tolerance.

Q: Do both parts require the same handling and storage conditions?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard component storage and handling procedures apply to both.

Q: Are the package footprints identical?

A: Both parts use the 0805 (2012 Metric) surface mount package with identical length and width dimensions (0.079" L x 0.049" W). Height is the only dimensional difference.

Q: What compliance standards apply to both parts?

A: Both parts are ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.