Equivalent & Substitute Parts for A-IE-S-DIP Firewire Connector

Part Overview

The A-IE-S-DIP is a Firewire (IEEE 1394) Receptacle Connector manufactured by Assmann WSW Components. This 6-position through-hole, right-angle connector is designed for PCB integration with solder termination and includes a board guide feature. The part is currently classified as obsolete, making identification of suitable alternatives essential for ongoing design support and component procurement.

Substiute Parts

A-IE-S-DIP

Assmann WSW ComponentsIn Stock: 1215A-IE-S-DIP Datasheet

Current PartRFQ

A-IES-DIP-C

Assmann WSW ComponentsIn Stock: 946A-IES-DIP-C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the A-IE-S-DIP is determined by strict adherence to the following parameters:

Critical Matching Parameters:

• Connector Type: Firewire (IEEE 1394)
• Number of Contacts: 6
• Gender: Receptacle
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 1A minimum
• Number of Ports: 1

The A-IES-DIP-C meets all critical matching parameters and is classified as a parametric equivalent. Both connectors share identical Firewire (IEEE 1394) specifications, 6-position receptacle configuration, through-hole right-angle mounting, and solder termination with 1A current rating.

Parameter Comparison

Engineering Selection Recommendations

The A-IES-DIP-C is the designated parametric equivalent for the obsolete A-IE-S-DIP. Selection of the A-IES-DIP-C is supported by the following factors:

Product Status: The A-IES-DIP-C maintains active product status with current manufacturing support, whereas the A-IE-S-DIP is obsolete and subject to inventory depletion.

Compliance: The A-IES-DIP-C achieves ROHS3 compliance, providing regulatory advantage for new designs and long-term supply chain stability. The original A-IE-S-DIP is RoHS non-compliant.

Electrical and Mechanical Compatibility: Both connectors maintain identical Firewire (IEEE 1394) specifications, 6-position receptacle configuration, through-hole right-angle mounting, and 1A current rating. Functional interchangeability is established.

Operating Temperature: The A-IES-DIP-C extends the lower operating temperature limit to -20°C, providing broader environmental operating range compared to the 15°C minimum of the original part.

Material Differences: The A-IES-DIP-C uses brass shell material versus steel in the original. Contact finish is gold only in the substitute versus gold and tin in the main part. These material variations do not affect functional compatibility for standard Firewire (IEEE 1394) applications.

Frequently Asked Questions (FAQ)

Q: Can the A-IES-DIP-C be used as a direct replacement for the A-IE-S-DIP in existing designs?

A: Yes. Both connectors share identical Firewire (IEEE 1394) specifications, 6-position receptacle configuration, through-hole right-angle mounting, and 1A current rating. Functional interchangeability is established for PCB integration.

Q: What are the key differences between these two connectors?

A: The primary differences are product status (obsolete versus active), RoHS compliance (non-compliant versus ROHS3 compliant), operating temperature range (-20°C to 85°C versus 15°C to 85°C), shell material (brass versus steel), and contact finish (gold only versus gold and tin). These differences do not affect functional compatibility.

Q: Why should I transition from the A-IE-S-DIP to the A-IES-DIP-C?

A: The A-IE-S-DIP is obsolete with limited inventory availability. The A-IES-DIP-C provides active product status, ROHS3 compliance, extended operating temperature range, and assured long-term supply chain support.

Q: Are there packaging differences between these parts?

A: The A-IE-S-DIP is supplied without specified packaging, while the A-IES-DIP-C is supplied in Tray packaging. Confirm packaging requirements with your procurement process.

Q: Does the change in shell material from steel to brass affect performance?

A: No. Both materials provide adequate shielding and mechanical support for Firewire (IEEE 1394) receptacle applications. The material change does not impact electrical or mechanical compatibility.

Q: Is the A-IES-DIP-C suitable for extended temperature applications below 15°C?

A: Yes. The A-IES-DIP-C operates from -20°C to 85°C, extending the lower temperature limit by 35°C compared to the original A-IE-S-DIP specification of 15°C to 85°C.