AH286-YL-13 Equivalent & Substitute Parts

Part Overview

The AH286-YL-13 is a Brushless DC (BLDC) motor driver IC manufactured by Diodes Incorporated, designed for fan motor control applications. This Power Management IC integrates a fully integrated control and power stage with low-side output configuration and On/Off interface capability. The device operates across a 3.8V to 20V supply voltage range with 500mA output current capacity in a surface-mount SOT-89-5 package.

The AH286-YL-13 is classified as obsolete. Identifying equivalent and substitute parts is essential for design continuity, procurement planning, and system reliability in applications where this component is currently deployed or specified.

Substiute Parts

AH286-YL-13

Diodes IncorporatedIn Stock: 1902AH286-YL-13 Datasheet

Current PartRFQ

AH284-YL-13

Diodes IncorporatedIn Stock: 2545AH284-YL-13 Datasheet

Parametric EquivalentRFQ

AH285-YL-13

Diodes IncorporatedIn Stock: 3485AH285-YL-13 Datasheet

Parametric EquivalentRFQ

AH286-YL-13

Diodes IncorporatedIn Stock: 1902AH286-YL-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AH286-YL-13 are identified based on strict parametric equivalence across the following critical criteria:

Motor Driver Classification: Brushless DC (BLDC) motor driver with fully integrated control and power stage

Electrical Specifications: 500mA output current, 3.8V to 20V supply voltage range, 3.8V to 20V load voltage range, -40°C to 150°C operating temperature

Functional Architecture: Low-side output configuration (2 channels), On/Off interface, Power MOSFET technology

Physical & Environmental Compliance: SOT-89-5/6 surface-mount package, ROHS3 compliance, MSL 3 rating, REACH unaffected status

All substitute parts listed maintain identical electrical performance parameters, functional integration level, and environmental compliance certifications as the primary AH286-YL-13 device.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AH286-YL-13, AH284-YL-13, and AH285-YL-13—are classified as obsolete products. Selection among these equivalents should be based on current inventory availability and procurement lead times.

All substitute parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for applications subject to environmental and hazardous substance restrictions. The MSL 3 rating (168 hours) applies uniformly across all parts, requiring consistent moisture control during storage and handling.

For applications currently using the AH286-YL-13, the AH284-YL-13 and AH285-YL-13 provide direct parametric substitution without circuit redesign or PCB layout modification, as all electrical, functional, and package specifications are identical.

Frequently Asked Questions (FAQ)

Q: Can AH284-YL-13 and AH285-YL-13 be used as direct replacements for AH286-YL-13?

A: Yes. All three parts share identical electrical specifications (500mA output current, 3.8V–20V supply voltage), functional architecture (fully integrated BLDC driver with low-side output), and package format (SOT-89-5/6 surface mount). Direct substitution is supported without circuit modification.

Q: Are there any differences in pin configuration between these parts?

A: No differences are specified in the provided parameters. All parts use the SOT-89-5/6 package with identical output configuration (low-side, 2 channels) and On/Off interface.

Q: What is the significance of the MSL 3 rating?

A: MSL 3 indicates a moisture sensitivity level requiring storage at ≤30% relative humidity and a floor life of 168 hours after exposure to higher humidity. Proper moisture control during component storage and handling is required to maintain device reliability.

Q: Why are all three parts classified as obsolete?

A: Obsolete status indicates these parts are no longer in active production. Procurement should prioritize available inventory from authorized distributors. Long-term design strategies may require evaluation of current-generation BLDC motor driver alternatives from Diodes Incorporated or other manufacturers.

Q: Are there compliance differences between the substitute parts?

A: No. All parts maintain identical ROHS3 compliance and REACH unaffected status, ensuring equivalent regulatory compliance for applications in restricted substance environments.